garagelu
09-26-2010, 04:23 PM
I have a set of JWT C1 cams for sale. Everyone knows JWT makes some awesome products and JWT cams are one of the best cams for the SR and make some really good number too.
The specs are 264 duration and 12.09mm lift.
PROBLEM: I bought these cams brand new from JWT. I even have the box I got them in as pictured. I installed them and ran them for only 70 miles. I had no reason to pull the valve cover but decided to do some double checks on my install. When I pulled the cover, I saw that number 1 and 2 intake lobes had some abnormal wear on it. I immediately knew it was oil starvation. So I pulled my oil squirter and ran hot water through them to check. The 1st and 2nd squirters on the intake side were definitely clogged up. Check out the picture to see the damage.
I went ahead and bought a brand new set of C1 cams to replace these. I am selling these cheap so you can either buy another intake cam or you could potentially send these back to JWT to get repaired. Just not sure if they offer this surface. Or if you can find a shop that can rebuild a cam lobe, that is an option too. They basically build up weld on the cam lobe and then machine it back to the original spec.
PRICE: 150 shipped-----------SOLD
PM me or email at [email protected] if you want them.
http://farm5.static.flickr.com/4148/4965594341_fc54e488e3_z.jpg
http://farm5.static.flickr.com/4150/4966196312_3a251de79a_z.jpg
http://farm5.static.flickr.com/4090/4966196646_2ed8527fea_z.jpg
http://farm5.static.flickr.com/4106/4966197094_c91e1d2a88_z.jpg
http://farm5.static.flickr.com/4110/4965595913_ccb03ae7cd_z.jpg
The specs are 264 duration and 12.09mm lift.
PROBLEM: I bought these cams brand new from JWT. I even have the box I got them in as pictured. I installed them and ran them for only 70 miles. I had no reason to pull the valve cover but decided to do some double checks on my install. When I pulled the cover, I saw that number 1 and 2 intake lobes had some abnormal wear on it. I immediately knew it was oil starvation. So I pulled my oil squirter and ran hot water through them to check. The 1st and 2nd squirters on the intake side were definitely clogged up. Check out the picture to see the damage.
I went ahead and bought a brand new set of C1 cams to replace these. I am selling these cheap so you can either buy another intake cam or you could potentially send these back to JWT to get repaired. Just not sure if they offer this surface. Or if you can find a shop that can rebuild a cam lobe, that is an option too. They basically build up weld on the cam lobe and then machine it back to the original spec.
PRICE: 150 shipped-----------SOLD
PM me or email at [email protected] if you want them.
http://farm5.static.flickr.com/4148/4965594341_fc54e488e3_z.jpg
http://farm5.static.flickr.com/4150/4966196312_3a251de79a_z.jpg
http://farm5.static.flickr.com/4090/4966196646_2ed8527fea_z.jpg
http://farm5.static.flickr.com/4106/4966197094_c91e1d2a88_z.jpg
http://farm5.static.flickr.com/4110/4965595913_ccb03ae7cd_z.jpg