super lost!

[Mikey88]

so i put my motor (SR20DET S13) in today and wired everything up..i go to crank the motor itll fire then die instantly.. so before all this i slapped some valves and rebuilt the motor..timed it completely to spec and checked it 3 to 4 times to make sure it was dead on at all 4 points (camshafts at 10' 12' to silver links, crank sprocket timed to gold link and pulley timed to tdc compression)..i went to check the timing and rotated it by hand and the damn cams dont line up...im running hks step1 264/264 dont know if i have to time them differently from the 10' 12' stock positions..

[WholeGrainS13]

They more than likely will have to be timed differently. Hit up google.

[Mikey88]

has anyone here ran the 264/264 step 1 cams?

[japslapsilvia]

are you trying to get the painted links to line up with the dots on the sprokets?

U will have to turn the motor over SEVERAL times to get that to happen. there is a procedure in which you count links. its much easier to do.

i posted a link to it a while back. search around and u will find it.