PDA

View Full Version : need help setting the timing on my soch!!pleasee


haro_ryder90
09-15-2010, 02:04 AM
whats up guys im rebuilding my single cam but i have a question about the timing...right now the block is ready for the rebuilt head to go on..i know the crankshaft and camshaft keyholes are supposed to be at 12o'clock with number 1 piston at TDC.before i bolt down the head is there anything special i need to do?i have read that wen u set the timing everything is supposed to be at TDC on the compression stroke then the oil pump and distributor are installed with the shaft looking like a backwards "D"...so my main question is how do i go about installing everything starting from where i stand?
this is my first engine rebuild so please bear with me guys;)
thanks!!

kalypso123
09-15-2010, 04:18 PM
Reading an sohc will give you the most information

haro_ryder90
09-15-2010, 05:11 PM
reading an sohc....i dont know wat that means??

please excuse my misspelled word...

kalypso123
09-15-2010, 06:52 PM
sohc Manual*

sorry that word was missing. I'd imagine thats the only way to get it perfect and understand what needs to be done flawlessly.

jeremy242
09-15-2010, 08:37 PM
I just did mine today the chilton has all the info you need. I dont go anywhere with out it.

haro_ryder90
09-16-2010, 03:04 AM
i geuss ill have to get a manual then...thanks guys

steve shadows
09-16-2010, 10:21 AM
yes....if you're lucky enough to have an engine in your nissan that actually came with the car indulge in the sweetness of an FSM or at least a SM of some kind....ftw

jeremy242
09-16-2010, 01:41 PM
That is why i didnt go into detail about how to do it because without pictures or step by step details it would be pointless