PDA

View Full Version : eye hole bolts (for harness install) where to get em?

CleanAndLegit
09-12-2010, 06:14 PM
where do you get em at, i dont really wanna order em from sparco or whatever
is there any other place to get them at?
i have 4 but theyre too big ): and wont fit
i understand that they are 3/8 or 14mm bolts fine thread so yeah
shoot me a good place
i already trieddd, harbor freight home depot, and ace hardware
codyace
09-12-2010, 08:50 PM
It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com (http://www.summitracing.com/parts/IMR-50000021)


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?
CleanAndLegit
09-12-2010, 11:45 PM
It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com (http://www.summitracing.com/parts/IMR-50000021)


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?

well reason i dont wanna get em from sparco is cause 1 i already have em and they are too big and 2 i wouldnt wanna buy them again only to find out they are too big, and i did use google came up with pretty much nada

and also i was trying to use the eye hole bolts cause its easier to get in and out... ahaha
and thanks thiough might just go with that
codyace
09-16-2010, 03:19 PM
Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.
jachien
09-16-2010, 09:58 PM
takata has 2 different kinds. a short and a long.
CleanAndLegit
09-19-2010, 07:43 PM
Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.
well the thing is my harness came with the hooks and they are sparco... so infact if i were to locate the eyehole bolts then id beinstalling them properly... so yeah i dont really care for the easy off and on id just rather not spend more money on the things i in a way already have... so yeah i wanna know where to get the right eye bolts