TrackWellPerformance69
09-06-2010, 06:30 PM
My God, this is going to be hard to do... I've put so much time energy and sacrifice into this car; but it has to be done in the name of progression. :cry:
Most of this stuff is still on the car, so I may not have pics of everything. The stripping will start this week. Prices are pretty firm and fair for the most part. If u see something that u think is over priced, then PM me a offer and we'll go from there. Prices do not include PayPal or shipping unless stated.
The bare chassis ... The ULTIMATE option for the hard-core guys wanting/needing a chassis swap! $4,000 OBO. Check my build thread for details on chassis...
http://nissan.240sx.net/viewtopic.php?f=4&t=2383&st=0&sk=t&sd=a[/url]]
I have the Dimple die set to add DD plates joining the chassis to the cage, but I haven't built them yet...
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0318001927.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0313001728.jpg
7 layers of candy and clear [then wet sanded/buffed] for the intentions of buffing out those cone scuffs and rock chips from track abuse.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0314001602a.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0315001922b-1.jpg
it has tinted front and side marker lights now
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0316001802.jpg
FMIC 4" Thick $60 shipped MINT condition w/ adj. brackets.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07358.jpg
Custom IC plumbing for "blow-thru" KA-T setup. [maf not included red bov will be replaced w/ a real greddy purple BOV] $120
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07353.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07360.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07361.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07351.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07350.jpg
KAAZ 1.5 way LSD professionally installed in the pumpkin, properly broken in... maybe 2500 miles on it, no slipping. $600
Circuit Sports FPR $50
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07346.jpg
550cc Deatschwerks inj's [less than 1 yr old] $220 in the rail
KTS coilovers $550 [I will need stock replacements]
BNIB set of Hawk HP Plus track pads for Z32 front.. $50
56 Trim 2871r w/ a .86 A/R turbine housing, 3" inlet less than 500 miles $800
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07047.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07048.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07054.jpg
I took this pic while disassembling the car... This turbo is [u]MINT Get this new turbo for $100's off the price of a new one
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07355.jpg
One G-FORCE 6-point camlock FIA rated harness[6 months old]. $125
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0212001941.jpg
Front/rear z32 [26mm Alum] brake setup w/ rotors redrilled for 4lug. Z32 BMC, SPL SS/Teflon lines F&R. Fronts are Powerslot rotors w/ Hawk HP pads. Rear are std rotors and pads. $550 for everything
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001807b.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06506.jpg
5Zigen FNOR1c Front 17x8 w/ falken rt615 235/40's w/ lots of tread left; Rear 17x9+20 w/ RT615's 245/45's also in great shape. The fronts are a few yrs older [has typical FN paint flake, but 0 rash].. I just bought the rears last yr. Maybe 1000 miles on rear wheels. $700 for the set.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06508.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0307001724-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0307001723b-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001814.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001813a.jpg
ACT Heavy Duty Pressure Plate, 6 puck Sprung Disk, and Findanza 11 lb flywheel $200 each.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/1127091758a.jpg
Circuit sports Breather tank $45
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0326001840b-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06881.jpg
Hallman Pro manual boost controller. maybe 200 miles on it. MINT! I paid $100. $70 shipped.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07228.jpg
S13 [I think] VC $20 plus shipping
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07236.jpg
pass door handle w/ electric window switch [$15 shipped]
Faze boost/vac gauge [$15 shipped]
Blown garrett replacement s14 BB turbo $75 [get a new turbo CHRA w/ Garrett's exchange program fo-da-cheap!] inlets and stuffs s15 inlet=***SOLD***, others = $15 each]
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07219.jpg
Duel 12" Flex-a-lite fans... $180 Shipped
I HAVE had some issues w/ fuses popping and wires melting. BUT, I bought a quality fuse block and ran 10 GA wires on top of adding grounds... No problems since. These fans are awesome for events where u sit in grid, then run hard, then sit again.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07233.jpg
The fan on the right was cracked, but I put some super bad 495 locktite on it ovr a yr ago w/ no problems.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07235.jpg
Refreshed KA24DE & Transmission ***SOLD***
Mishimoto KA Radiator ***SOLD***
KA Transmission ***SOLD***
TEIN hardened inner tierods, Circuit sports outer bumpsteer adj ends ***SOLD***
Fujitsubo exhaust ***SOLD***
Nistune ECU w/ data cable, and software key. $400 [***SOLD***
S13 Diff cover w/ cooling fins and extra gear oil capacity. $55 shipped. ***SOLD***
Autometer oil psi gauge [never installed [$35 shipped] ***SOLD*** But I also have a 2nd one!
S13 dash trim[$15 plus shipping] ***SOLD***
Trust boost/vac gauge [$25 shipped] ***SOLD***
Set of 2 SPARCO seats ***SOLD***
Tail lights ***SOLD***
Z32 Rear Uprights ***SOLD***
F&R Whiteline Adj. swaybars ***SOLD***
Buy my stuff. DO IT! 8-)
[b]ALSO INTERESTED IN TRADES FOR TIG WELDERS OR RACING KART SETUPS!![SPRINT KARTS, NOT DIRT]
Most of this stuff is still on the car, so I may not have pics of everything. The stripping will start this week. Prices are pretty firm and fair for the most part. If u see something that u think is over priced, then PM me a offer and we'll go from there. Prices do not include PayPal or shipping unless stated.
The bare chassis ... The ULTIMATE option for the hard-core guys wanting/needing a chassis swap! $4,000 OBO. Check my build thread for details on chassis...
http://nissan.240sx.net/viewtopic.php?f=4&t=2383&st=0&sk=t&sd=a[/url]]
I have the Dimple die set to add DD plates joining the chassis to the cage, but I haven't built them yet...
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0318001927.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0313001728.jpg
7 layers of candy and clear [then wet sanded/buffed] for the intentions of buffing out those cone scuffs and rock chips from track abuse.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0314001602a.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0315001922b-1.jpg
it has tinted front and side marker lights now
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0316001802.jpg
FMIC 4" Thick $60 shipped MINT condition w/ adj. brackets.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07358.jpg
Custom IC plumbing for "blow-thru" KA-T setup. [maf not included red bov will be replaced w/ a real greddy purple BOV] $120
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07353.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07360.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07361.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07351.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07350.jpg
KAAZ 1.5 way LSD professionally installed in the pumpkin, properly broken in... maybe 2500 miles on it, no slipping. $600
Circuit Sports FPR $50
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07346.jpg
550cc Deatschwerks inj's [less than 1 yr old] $220 in the rail
KTS coilovers $550 [I will need stock replacements]
BNIB set of Hawk HP Plus track pads for Z32 front.. $50
56 Trim 2871r w/ a .86 A/R turbine housing, 3" inlet less than 500 miles $800
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07047.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07048.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07054.jpg
I took this pic while disassembling the car... This turbo is [u]MINT Get this new turbo for $100's off the price of a new one
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07355.jpg
One G-FORCE 6-point camlock FIA rated harness[6 months old]. $125
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0212001941.jpg
Front/rear z32 [26mm Alum] brake setup w/ rotors redrilled for 4lug. Z32 BMC, SPL SS/Teflon lines F&R. Fronts are Powerslot rotors w/ Hawk HP pads. Rear are std rotors and pads. $550 for everything
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001807b.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06506.jpg
5Zigen FNOR1c Front 17x8 w/ falken rt615 235/40's w/ lots of tread left; Rear 17x9+20 w/ RT615's 245/45's also in great shape. The fronts are a few yrs older [has typical FN paint flake, but 0 rash].. I just bought the rears last yr. Maybe 1000 miles on rear wheels. $700 for the set.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06508.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0307001724-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0307001723b-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001814.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0325001813a.jpg
ACT Heavy Duty Pressure Plate, 6 puck Sprung Disk, and Findanza 11 lb flywheel $200 each.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/1127091758a.jpg
Circuit sports Breather tank $45
http://i616.photobucket.com/albums/tt244/just_wanna_drive/0326001840b-1.jpg
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC06881.jpg
Hallman Pro manual boost controller. maybe 200 miles on it. MINT! I paid $100. $70 shipped.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07228.jpg
S13 [I think] VC $20 plus shipping
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07236.jpg
pass door handle w/ electric window switch [$15 shipped]
Faze boost/vac gauge [$15 shipped]
Blown garrett replacement s14 BB turbo $75 [get a new turbo CHRA w/ Garrett's exchange program fo-da-cheap!] inlets and stuffs s15 inlet=***SOLD***, others = $15 each]
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07219.jpg
Duel 12" Flex-a-lite fans... $180 Shipped
I HAVE had some issues w/ fuses popping and wires melting. BUT, I bought a quality fuse block and ran 10 GA wires on top of adding grounds... No problems since. These fans are awesome for events where u sit in grid, then run hard, then sit again.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07233.jpg
The fan on the right was cracked, but I put some super bad 495 locktite on it ovr a yr ago w/ no problems.
http://i616.photobucket.com/albums/tt244/just_wanna_drive/DSC07235.jpg
Refreshed KA24DE & Transmission ***SOLD***
Mishimoto KA Radiator ***SOLD***
KA Transmission ***SOLD***
TEIN hardened inner tierods, Circuit sports outer bumpsteer adj ends ***SOLD***
Fujitsubo exhaust ***SOLD***
Nistune ECU w/ data cable, and software key. $400 [***SOLD***
S13 Diff cover w/ cooling fins and extra gear oil capacity. $55 shipped. ***SOLD***
Autometer oil psi gauge [never installed [$35 shipped] ***SOLD*** But I also have a 2nd one!
S13 dash trim[$15 plus shipping] ***SOLD***
Trust boost/vac gauge [$25 shipped] ***SOLD***
Set of 2 SPARCO seats ***SOLD***
Tail lights ***SOLD***
Z32 Rear Uprights ***SOLD***
F&R Whiteline Adj. swaybars ***SOLD***
Buy my stuff. DO IT! 8-)
[b]ALSO INTERESTED IN TRADES FOR TIG WELDERS OR RACING KART SETUPS!![SPRINT KARTS, NOT DIRT]