irockface18
09-06-2010, 11:41 AM
Hey
I've got the single slammer in my 240 and I'm having some idle issues with it. NORMALLY when I start it up, it idles at 2k RPMS but once I start driving it, it idles at 1k as usual. But recently, when I turn it on it starts at 1.5K and fluctuates to 2k and back down, like I'm revving it up over and over again, but then once I start driving it stops but idles at 2K most of the time.
I cleaned the IACV already and that didn't help. So far, I haven't seen any leaks in the hoses. Even when I brake and the car revs up and down, I can feel the brake pulling too. When we took the sensors off the fuel rail on the top of the engine, it ran better but still revved at 2K or would occasionally rev up and down.
Here's the video of how it is sometimes.
http://www.youtube.com/watch?v=5sLQYu2fSXg
If you have any idea what it might be, please let me know. Thanks!
-Michelle
I've got the single slammer in my 240 and I'm having some idle issues with it. NORMALLY when I start it up, it idles at 2k RPMS but once I start driving it, it idles at 1k as usual. But recently, when I turn it on it starts at 1.5K and fluctuates to 2k and back down, like I'm revving it up over and over again, but then once I start driving it stops but idles at 2K most of the time.
I cleaned the IACV already and that didn't help. So far, I haven't seen any leaks in the hoses. Even when I brake and the car revs up and down, I can feel the brake pulling too. When we took the sensors off the fuel rail on the top of the engine, it ran better but still revved at 2K or would occasionally rev up and down.
Here's the video of how it is sometimes.
http://www.youtube.com/watch?v=5sLQYu2fSXg
If you have any idea what it might be, please let me know. Thanks!
-Michelle