S14 Intercooler setup that doesnt sag below OEM bumper?

[drag113]

Does anybody have a good experience with an intercooler kit that doesnt sag or drop below the OEM kouki bumper? Mine drops below the OEM bumper. Its a little tall for what it is and when i go over a bump or a steep driveway, the first thing i hit.. is the intercooler :( Pics would help too!. Im looking to replace mine asap.

[Sileighty_85]

damn how low are you?

im pretty low on 18's, if i had the kouki lip mine wouldnt be below mine
http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/Kouki/DSCN3107.jpg

[drag113]

Id say lower than yours :/

[Sileighty_85]

the intercooler or your car?

[TheGrim]

Ive got the ISIS fmic setup and stock kouki usdm bumper with no lip. Mine hangs about a 1/8 inch lower than sileighty85 does. do u have any pics of the support tabs and how u have it mounted?

[epics13]

here check these out http://zilvia.net/f/forced-induction/268945-parts-shop-max-high-mount-intercooler-kit-drift-spec-coming-very-soon.html

[codyace]

Greddy RSPL doesn't

[Om1kron]

here check these out http://zilvia.net/f/forced-induction/268945-parts-shop-max-high-mount-intercooler-kit-drift-spec-coming-very-soon.html

This!!! it's also like 600 dollars cheaper than a greddy intercooler setup.

[drag113]

the intercooler or your car?

The intercoooler!

I was thinking of that high mount one but im a bit of a fanboy and want it looking through my bumper :D

Any pics of the isis?

[drag113]

Ive got the ISIS fmic setup and stock kouki usdm bumper with no lip. Mine hangs about a 1/8 inch lower than sileighty85 does. do u have any pics of the support tabs and how u have it mounted?

No but hangs about an inch below the bumper :/

[Sileighty_85]

The intercoooler!

I was thinking of that high mount one but im a bit of a fanboy and want it looking through my bumper :D

Any pics of the isis?


the one on my Car is an ISIS Core. But I made some custom lower brackets so i didnt have to make extra holes in my Lower core support.

I have a build thread in chat called "Project RB" that shows how I made the brackets

[drag113]

http://i29.photobucket.com/albums/c283/kyoshokid/s14/stock.jpg

Found this pic elsewhere. Doesnt look like it sags much below the oem bumper

[squatting pigeon]

I got a huge FMIC from CXRacing on ebay, and it mounted up perfect on my zenki without any mods other than shaving the inside of the bumper cover a little... plus it was super cheap and made very well.

[Big Zee]

PBM high mount is the way to go, less piping also so you have way faster response. it still shows through the bumper, but only like 3/4 instead of full, which allows more air into your rad so you have both cores getting air cooled instead of one and residue air cooling the other.

[endlessboost]

^ dude what are you talking about? The PBM high mount sits right underneath the rad support. Its nowhere near as low as the other kits these guys are talking about.

[Bernie (NoVA)]

I got a huge FMIC from CXRacing on ebay, and it mounted up perfect on my zenki without any mods other than shaving the inside of the bumper cover a little... plus it was super cheap and made very well.

Do you have a link to the kit you got?
Can you post some pictures please?

[squatting pigeon]

Do you have a link to the kit you got?
Can you post some pictures please?

This is a link for the ebay auction for the one i bought, its only for the s14/s15 sr swap, but im sure they make a kit for the s13 sr if thats what youre doing, just check their store
CXRacing FMIC INTERCOOLER KIT 240SX S14 S15 SR20DET: eBay Motors (item 140459825706 end time Oct-12-10 16:00:00 PDT) (http://cgi.ebay.com/ebaymotors/CXRacing-FMIC-INTERCOOLER-KIT-240SX-S14-S15-SR20DET-_W0QQcmdZViewItemQQhashZitem20b40eda2aQQitemZ14045 9825706QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
I have a zenki, but the bumpers are the same size i think
http://i53.tinypic.com/fm5p1u.jpg
http://i51.tinypic.com/fu0rk9.jpg
http://i54.tinypic.com/2198jsj.jpg
I know, the intercooler's a little crooked :P I need to tweak the mounts a bit

[Bernie (NoVA)]

This is a link for the ebay auction for the one i bought, its only for the s14/s15 sr swap, but im sure they make a kit for the s13 sr if thats what youre doing, just check their store
CXRacing FMIC INTERCOOLER KIT 240SX S14 S15 SR20DET: eBay Motors (item 140459825706 end time Oct-12-10 16:00:00 PDT) (http://cgi.ebay.com/ebaymotors/CXRacing-FMIC-INTERCOOLER-KIT-240SX-S14-S15-SR20DET-_W0QQcmdZViewItemQQhashZitem20b40eda2aQQitemZ14045 9825706QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
I have a zenki, but the bumpers are the same size i think
I know, the intercooler's a little crooked :P I need to tweak the mounts a bit

Thanks for those - do you have pictures w. the fascia off of the car?

[squatting pigeon]

Thanks for those - do you have pictures w. the fascia off of the car?

no, i dont, but i might just fix that weird angle of the intercooler tomorrow, so I'll take you a pic or two

[DJPimpFlex]

PBM is the way to go.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs173.snc4/37989_152949621386609_100000147175220_501860_42761 63_n.jpg

[xxoreolovexx]

i have a cxracing from ebay on my kouki and had to mount on the very top holes. also, i had to knotch my headlight housing and she hangs perfect.

[squatting pigeon]

Thanks for those - do you have pictures w. the fascia off of the car?

Ta-da!
http://i51.tinypic.com/2eal953.jpg

[Bernie (NoVA)]

[QUOTE=squatting pigeon;3687375]Ta-da!

Thank You I appreciate you taking the time for that.

[squatting pigeon]

[QUOTE=squatting pigeon;3687375]Ta-da!

Thank You I appreciate you taking the time for that.

No problemo!