Wilwood Brake Parts (Pedals, Calipers, Rotors) Nascar Steering Column

[S13FREEAAK]

I'm cleaning out some of the stuff that has been laying around the shop.

(2) Wilwood Forged Dynalite Calipers

1.25" Rotor
1.75" Pistons

Only bolted on, never any fluid put to them.

$175 for the pair

Southwest Speed - Manufacturing, Warehousing, and Distributing Race Car Parts Since 1975. (http://southwestspeed.com/?sec=view_part&id=7519)

http://i20.photobucket.com/albums/b207/S13FREEAAK/IMG_2994.jpg
http://i20.photobucket.com/albums/b207/S13FREEAAK/IMG_2993.jpg


Rotors with hats

Never used

2 hats, 2 rotors, new bolts

11.75" Diameter
1.25" Width

Bolt patterns on the hats

5 X 4 1/2", 5 X 4 3/4", & 5 X 5"

$125 for the pair


Specs for each in the links

Southwest Speed - Manufacturing, Warehousing, and Distributing Race Car Parts Since 1975. (http://southwestspeed.com/?sec=view_part&id=7551)

Southwest Speed - Manufacturing, Warehousing, and Distributing Race Car Parts Since 1975. (http://southwestspeed.com/?sec=view_part&id=7543)


(2) Wilwood GT Calipers

Massive 4 piston

Part numbers

120-2950-fs
120-2951-fs

1.38" Rotors

1.88" and 1.75" Pistons

$250 for the pair

http://i20.photobucket.com/albums/b207/S13FREEAAK/IMG_3001.jpg
http://i574.photobucket.com/albums/ss190/GAINSTATUS/IMG_0950.jpg

2009 Corvette factory Rotors

New

Redrilled to 5x114.3

$250 from GM

Roughly 13"x1.25"

$125 plus shipping for the pair

Behind a 17" Wheel

http://i574.photobucket.com/albums/ss190/GAINSTATUS/IMG_1025.jpg

http://i20.photobucket.com/albums/b207/S13FREEAAK/IMG_2992.jpg

Floor Mount Brake Pedal

New, comes with 2 master cylinders

$125

Southwest Speed - Manufacturing, Warehousing, and Distributing Race Car Parts Since 1975. (http://southwestspeed.com/?sec=view_part&id=26056)

Floor Mounted Clutch Pedal

New

$100

Southwest Speed - Manufacturing, Warehousing, and Distributing Race Car Parts Since 1975. (http://southwestspeed.com/?sec=view_part&id=25483)

I also have a swing mount setup if interested.

Steering column of Nascar Truck

Quick Release welded on.

http://southwestspeed.com/?sec=view_menu&cat=Steering&sub=Disconnects&ssub=Pull Type, Splined

3/4" Shaft, has 2 3/4" U joints welded on.

I can get more pictures if interested.

$125

http://i20.photobucket.com/albums/b207/S13FREEAAK/IMG_2995.jpg

All prices are obo.

[email protected]