flxcore
08-26-2010, 12:16 PM
Up for sale is my 1991 240sx coupe w/ rb20det
mind you this car does need work. the rb pulls hard no problem. its on stock wastgate so it hits about 9 psi. when i got the motor it was set to 15psi and pulled like crazy. i set it lower to better maintain life of the motor. mechanically it runs and can be daily driven. the exterior needs the most work. the interior is all there and in pretty good shape.
Im asking 2000 firm
407-487-0246 text me
mods:
rb20det -1500
rb mounkt kit - 300
godspeed big fmic-200
cx racing 2inch rad w/ 10 inch fan -200
3 inch straight pipe all the way back
cons:
could use new turbo or rebuild
no a/c or p/s
horrid paint. this thing was primered 43267823 times by the previous owner.
cracked windshield
rear quarter panels need work or overfenders
front bumper was cut for intercooler.
one fender is beyond repair but will include another fender(reason it is not on the car it is not black)
drivers side window has a hard time going up and down
needs new transmition mount(common rb problem)
will eventually need new starter.
The car steering wheel shakes at around 45 -50 mph. it needs new inner and outer tie rods and a alignment. i have new inner and outer tie rods that will be included with sale.
please keep negative comments out.
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200191.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200193.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200188.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200192.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200194.jpg
Drivers side fender ^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200195.jpg
Drivers side quarter panel ^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200196.jpg
passenger quarter panel^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200197.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200200.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200189.jpg
mind you this car does need work. the rb pulls hard no problem. its on stock wastgate so it hits about 9 psi. when i got the motor it was set to 15psi and pulled like crazy. i set it lower to better maintain life of the motor. mechanically it runs and can be daily driven. the exterior needs the most work. the interior is all there and in pretty good shape.
Im asking 2000 firm
407-487-0246 text me
mods:
rb20det -1500
rb mounkt kit - 300
godspeed big fmic-200
cx racing 2inch rad w/ 10 inch fan -200
3 inch straight pipe all the way back
cons:
could use new turbo or rebuild
no a/c or p/s
horrid paint. this thing was primered 43267823 times by the previous owner.
cracked windshield
rear quarter panels need work or overfenders
front bumper was cut for intercooler.
one fender is beyond repair but will include another fender(reason it is not on the car it is not black)
drivers side window has a hard time going up and down
needs new transmition mount(common rb problem)
will eventually need new starter.
The car steering wheel shakes at around 45 -50 mph. it needs new inner and outer tie rods and a alignment. i have new inner and outer tie rods that will be included with sale.
please keep negative comments out.
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200191.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200193.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200188.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200192.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200194.jpg
Drivers side fender ^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200195.jpg
Drivers side quarter panel ^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200196.jpg
passenger quarter panel^^^
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200197.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200200.jpg
http://i76.photobucket.com/albums/j20/carloslovesderby/S4200189.jpg