mastaflash05
08-25-2010, 06:36 PM
i have a bunch of parts in the garage that i dont need anymore that i would like to sell.
this downpipe and turbo lines set is from a hybridynamics kit. it should work with any typical top mount t3 turbo manifold for sr. the downpipe is a 4 bolt flange for the turbo, and v band connecting to the lower downpipe, which will then bolt to the factory cat location/test pipe. there is also some sort of cutout flange and assembly on the downpipe.
the lines include drain flange, drain line, fittings to the block for oil and coolant, oil feed line, and coolant lines. the fitting to the block for coolant will have to be replaced, the threads are damaged.
i would like to get 150 for the downpipe, and 100 for the lines.
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1858.jpg
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1858.jpg
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1857.jpg
- Rush Racing Antilag unit. this is the old design unit, but it works exactly the same, it just has a little bigger, boxy case. it is brand new, has never been installed. i use the updated unit and it works great. helps with consistant and better launches. Rush Racing Development - Antilag Launch Control Units (http://rushracingdev.com/al.html)
the unit is brand new, but the old design. i would like to get $150 for it OBO.
OEM S14 Parts -
washer fluid tank, no pump - $25
coolant tank - $20
rear seatbelt assemblies - $25
brake master cylinder - $30
Shifter assembly, ka or sr - $25
wiper motor - $20
auxilary cooling fan - $20
2x s14 ka ecus. i believe one is for auto and one is for 5 speed. - $40 each
adjstable rear upper control arms, good shape, low miles. s13/s14 - $60
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1860.jpg
OEM S13 SR20 Parts -
steel lower oil pan, slightly dented, hammer it out - $30
crank pully, in good shape - $30
2x water pumps - $15 each
idle control valve - $60
4 ignition coils with harness - $100
4 ignition coils, no harness - $60
stock intake and exhaust camshafts - $50
3x piston and rod assemblies - $25 each
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1861.jpg
prices are open to offers, but i feel that the listed prices are reasonable. lmk, thanks. shipping is at buyes expense.
this downpipe and turbo lines set is from a hybridynamics kit. it should work with any typical top mount t3 turbo manifold for sr. the downpipe is a 4 bolt flange for the turbo, and v band connecting to the lower downpipe, which will then bolt to the factory cat location/test pipe. there is also some sort of cutout flange and assembly on the downpipe.
the lines include drain flange, drain line, fittings to the block for oil and coolant, oil feed line, and coolant lines. the fitting to the block for coolant will have to be replaced, the threads are damaged.
i would like to get 150 for the downpipe, and 100 for the lines.
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1858.jpg
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1858.jpg
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1857.jpg
- Rush Racing Antilag unit. this is the old design unit, but it works exactly the same, it just has a little bigger, boxy case. it is brand new, has never been installed. i use the updated unit and it works great. helps with consistant and better launches. Rush Racing Development - Antilag Launch Control Units (http://rushracingdev.com/al.html)
the unit is brand new, but the old design. i would like to get $150 for it OBO.
OEM S14 Parts -
washer fluid tank, no pump - $25
coolant tank - $20
rear seatbelt assemblies - $25
brake master cylinder - $30
Shifter assembly, ka or sr - $25
wiper motor - $20
auxilary cooling fan - $20
2x s14 ka ecus. i believe one is for auto and one is for 5 speed. - $40 each
adjstable rear upper control arms, good shape, low miles. s13/s14 - $60
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1860.jpg
OEM S13 SR20 Parts -
steel lower oil pan, slightly dented, hammer it out - $30
crank pully, in good shape - $30
2x water pumps - $15 each
idle control valve - $60
4 ignition coils with harness - $100
4 ignition coils, no harness - $60
stock intake and exhaust camshafts - $50
3x piston and rod assemblies - $25 each
http://i164.photobucket.com/albums/u3/bnvbrent/IMG_1861.jpg
prices are open to offers, but i feel that the listed prices are reasonable. lmk, thanks. shipping is at buyes expense.