SixSpeedSleuth
08-24-2010, 04:44 PM
I have a set of NEW CP Pistons for an SR20 block. The pistons are 86.5mm and 9;0;1 compression ratio and come with everything you need (wrist pins, rings, ect).
$450 Shipped!!
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell001.jpg
Next is a set of Manley Turbo Tuff I Beam rods for an SR block. These rods can handle 1000hp. Quit playing around with Eagle rods and step up to the Manley's. $620 shipped!
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell004.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell003.jpg
Last but not least is a Redtop SR20DET head with BRAND new Supertech Valvetrain which includes 96lb dual valve springs, Supertech titanium retainers, Supertech valve stem seals and a couple of valve guides were replaced as well. The head has also been hot tanked and milled slightly. This head is ready to go and you can turn it to 8,000 to 8,500 no problem. I have OVER $600 in parts and labor in the head alone, not counting the actual heads worth. $450 Shipped! (Yes, I have all the cam caps, oil squirters, ect.)
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell017.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell018.jpg
Somebody please help me out. I'm in need of cash and I have all these parts listed for WAY LESS than you can find them new, go ahead and look. Also, you can ask around about me, I'm legit as they come.
$450 Shipped!!
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell001.jpg
Next is a set of Manley Turbo Tuff I Beam rods for an SR block. These rods can handle 1000hp. Quit playing around with Eagle rods and step up to the Manley's. $620 shipped!
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell004.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell003.jpg
Last but not least is a Redtop SR20DET head with BRAND new Supertech Valvetrain which includes 96lb dual valve springs, Supertech titanium retainers, Supertech valve stem seals and a couple of valve guides were replaced as well. The head has also been hot tanked and milled slightly. This head is ready to go and you can turn it to 8,000 to 8,500 no problem. I have OVER $600 in parts and labor in the head alone, not counting the actual heads worth. $450 Shipped! (Yes, I have all the cam caps, oil squirters, ect.)
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell017.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell018.jpg
Somebody please help me out. I'm in need of cash and I have all these parts listed for WAY LESS than you can find them new, go ahead and look. Also, you can ask around about me, I'm legit as they come.