s14 kouki gauge cluster

[240sxwanted]

So I was installing a calibrated tach for s14 with 6 cylinders onto my original kouki cluster, but as I was unscrewing the original tach I noticed that the holes on the tach were different than the ones on the calibrated tach. I was thinking that might be from a zenki. Does anyone know if the holes from zenki and kouki tach are different?

This is the calibrated tach, look at the screw holes on this and then look at the ones on the cluster where it should bolt on to
http://i50.photobucket.com/albums/f323/Rawshell/Mobile%20Uploads/20100821174521.jpg

The four holes in the center where the "Nissan" is at are the ones where the original tach bolts on to. Of the four holes, only three are used though
http://i50.photobucket.com/albums/f323/Rawshell/Mobile%20Uploads/20100821174507.jpg

[Sileighty_85]

looks like an S13 design

Not sure on the Zenki S14 though

[240sxwanted]

the cluster face is from a zenki, but what i need to know is if the holes on the back of the tach are differ between a zenki and kouki

[Sileighty_85]

right but that doesnt look like an OEM tach cluster though, who ever calibrated it changed out the whole board so he might have mixed up the S13 and S14 boards

here what a Kouki OEM board looks like
http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/DSCN4109.jpg

[240sxwanted]

yea thats an oem tach right there, the calibrated one is different and its not an oem one. i just googled the back of an s14 zenki cluster and it looks like the holes will line up on that this calibrated tach.

[240sxwanted]

http://c1.ac-images.myspacecdn.com/images02/78/l_fb9a139555084297822e6eb74991ba50.jpg


heres the back of the zenki cluster, the three holes look like it will line up the this tach

[Sileighty_85]

Ok yeah I see now, I guess yeah that guy messed up

[Hxc_Nismo]

you could of calibrated it yourself for the rb. do you have a pic of the front of the tach cause it sorda looks like a zenki tach and not a kouki tach from the back side of your pic.

[240sxwanted]

yes, the back of the tach if for a zenki. that is why the holes dont line up on my kouki cluster. Now the next question is if i swap a zenki cluster on my car will the speedometer, temp, the signals, etc.. work correctly ?

[Sileighty_85]

yes, the back of the tach if for a zenki. that is why the holes dont line up on my kouki cluster. Now the next question is if i swap a zenki cluster on my car will the speedometer, temp, the signals, etc.. work correctly ?

You gotta rewire the Cluster Harness, Its not plug and play

[Hxc_Nismo]

yes, the back of the tach if for a zenki. that is why the holes dont line up on my kouki cluster. Now the next question is if i swap a zenki cluster on my car will the speedometer, temp, the signals, etc.. work correctly ?

no it wont you will have to get the pig tails from the zenki cluster and you will have to repin/rewire cause the pins are all different from the kouki and zenki

[240sxwanted]

ok thanks guys