Smaller sr20det Radiator?

[keMz]

anyone running a smaller radiator on there sr20det

basically im trying to do a mid / high mount intercooler and wanna run the IC piping direct but the koyo sr20det nflow radiator is really tall so i think im going to be forced to compress/flatten the 2.5" pipe so it can make it over the radiator and clear my hood..

looking for a smaller radiator that has the inlet/outlet on the same sides as the sr20det.

just curious if anyone has experience with this?

[keMz]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs361.snc4/44456_417838302723_702047723_5048125_1104798_n.jpg

[jlawdet]

why? my only question why? why not just do an FMIC and be done with it?

[Booost]

fmic = more power and lower intake air temps.

relocate that monstrous battery to the trunk, trade your intercooler for a front mount or make couplers to satisfy that one, and turn the boost up.

yeeehaw.

[jlawdet]

fmic = more power and lower intake air temps.

relocate that monstrous battery to the trunk, trade your intercooler for a front mount or make couplers to satisfy that one, and turn the boost up.

yeeehaw.

werrrrrrd. :werd: