Log in

View Full Version : S13 Flywheel question

cpl dozier
08-17-2010, 12:57 AM
Ok, so I have access to a lift for tomorrow night. I am swapping out my clutch. The problem is that I only have this lift for the evening. Everyone is closed that can turn my flywheel once I get it out. I got a flywheel from a friend. He has a dohc S13 motor and mine is a sohc S13 motor. The question is I want to get this flywheel turned during the daytime so that I am ready to go with the clutch swap once I get started with no down time.

Will a dohc flywheel work in my sohc? Or do I need to use a sohc flywheel?

Thanks in advance.
DJPimpFlex
08-17-2010, 01:58 AM
Searching + Google = Win

Exedy Stage 3 Hyper Single Clutch Kit Nissan 240SX S13 89-94 - NH08SD (http://www.customcarscentral.com/exdnh08sd-nissan-240sx-s13-89-94-.html)

http://zilvia.net/f/tech-talk/197925-ka24e-de-flywheel-clutch-compatibility.html
cpl dozier
08-17-2010, 08:37 AM
Searched with google and didn't win, right before I posted and found nothing. Then I made this thread and searched some more...Found it but not on this site...

Thanks...ass.
theboy
08-17-2010, 09:01 AM
they are the same between sohc and dohc ka's
HellsDrifter 666
08-17-2010, 09:17 AM
What theboy said, They are the same between both SOHC and DOHC. Same goes for the transmissions as well.
DJPimpFlex
08-17-2010, 10:33 AM
Searched with google and didn't win, right before I posted and found nothing. Then I made this thread and searched some more...Found it but not on this site...

Thanks...ass.

Well fine. See if I ever help you again Mr. Sassy Pants... Geez
Starclassicbb
08-18-2010, 11:53 AM
Yup that's right they are the same, I have KA24DE but I'm using my old single cam flywheel and I'm not having problems at all!
theboy
08-18-2010, 12:01 PM
What theboy said, They are the same between both SOHC and DOHC. Same goes for the transmissions as well.

s14 trans' are technically different. But yes they will bolt rite up to either ka. But thats not important
laocivic
08-20-2010, 02:56 PM
if only 240's were more compatible like hondas....ill prolly get flamed for saying that, but damn you can put anything part on any car basically. more so than on our cars
DJPimpFlex
08-20-2010, 04:14 PM
^ Nissan is a decent "parts bin" company. A lot of Z32 parts bolt right onto the SChassis cars as we all know.