Redrill rotors - orange county

[stinky_180]

Can anybody recommend me a competent machine shop that will

A) Redrill rotors to 4x114.3
B) Slot the rotors

I prefer local shops around orange county or south LA.

[stinky_180]

nobody?????

[slider2828]

isn't 88rotors in LA? Why redrill....

[stinky_180]

isn't 88rotors in LA? Why redrill....

The 88rotors house brand rotors cost more than OPpart rotors from Frsport.com. I need to redrill because the rotors are 5x114 and I am 4x114. 88rotors is in LA, but too far of a drive. I'm looking for a place local or furthest, south Los Angeles.

[Sam_Well.13]

im gonna need this info too.

[UNITEDMASTER]

PORTERFEILD RACING your one stop brake specialist,they may or may not do the redrill thing depends on whos there when you go,but for sure sloting.

PS- you can redrill it yourself, all of the mentioned rotors are pretty soft,its not hard to do if you have a 4 and a 5 lug rotor preferably with the identical centerbores.!

[stinky_180]

That is exactly what I was looking for, thanks a ton! I heard about redrilling it yourself, but I don't feel confident in taking on the simple task. Plus, I don't want to end up ruining a brand new set of rotors. Thanks again.

[heavenboundkevin]

pm me if you want me to type up a FULL write up on how to drill them yourself. i just did it about 2 months ago, no wobbles, came out fine, i was drilling 5 lug q45 rotors, into 4 lug.

i feel you are competent to do it yourself if you have a good drill, 1 titanium 1/2 inchdrill bit,another 1/2 in drill bit,wd-40, and a pair of vice grips <- very inportant. let me know if you need help.

and machine shops are iffy on drilling the rotors, because they say it will weaken the rotor and become a liability for the shop,

but i truly believe unless you are formula one racing, then this is not going to come into effect.