waste_of_space
08-03-2010, 08:54 AM
Self explanatory (plus an explanation!)
Nissan Consult Cable (streamlines live data to a laptop, performs active tests [i.e. put your nissan into timing mode without doing that damn "rain dance"], awesome tool for data logging! can perform ROM tuning/dumping with the proper software as well!): $70
I bought it, used it for a little bit, then upgraded to baller LCD consult interface. This shit still works good though, just requires the use of a laptop.
http://i27.tinypic.com/1tovig.jpg
Here's a description on what kind of cars it can be used on:
Car Support
Nissan Consult is supported on most petrol powered (generally not diesel) Nissans built in the 1990s. If the car has the female consult port (http://ecutalk.com/images/consultport.jpg), it will most likely support consult. There are exceptions to the rule, however. Consult is only supported on the Nissan ECUs, so replacement ECUs like the PowerFC, etc, will not support it (remapped/daughterboards ECUs or those with piggybacks like SAFC should be fine). Also some late model cars from 1999 may have an OBDII port and a Consult port, but only retain the consult port it for ancilliary systems (like AT, AirCon, HICAS, etc) diagnostics, but the main ECU may be OBDII.
Here's a link to the site where I purchased it from.
ECUTalk - Consult Cables (http://ecutalk.com/interface.aspx)
It's from Australia, so it's kangaroo scented as an added bonus!
Cheap quick releases, two available, one red, one some weird color. (hella JDM, bro): $20 each.
http://i27.tinypic.com/292s0wn.jpg
http://i31.tinypic.com/5bpumq.jpg
And I'll probably be putting my apexi AVC-R up for sale soon too, if anyone is in the market for an EBC, so let me know.
Sold most of the other stuff, here's what's left! Everything is OBO.
SR20 dump pipe/down pipe/cat delete combo: $110
http://i40.tinypic.com/2ive81e.jpg
GT-R 32 Driver's side seat plus modified seat rail (4th tab moddes to fit in S chassis) $250
http://i41.tinypic.com/21owjgk.jpg
Recaro knock off passenger side seat+seat rail: $80
http://i39.tinypic.com/llb4l.jpg
180sx center piece: $50
http://i43.tinypic.com/9fo94x.jpg
ROM stuff, each board will come with 2 chips.
SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors
I've got 2 of them, $50 bucks each
http://i44.tinypic.com/263fyx0.jpg
Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them. $60 each.
http://i39.tinypic.com/24dopk3.jpg
Newer SR20DET board (type x motor, s15 motor, s14 motor) $70
http://i39.tinypic.com/5wl9a8.jpg
93-94 KA24DE stuffs:
2 main ecu/engine harnesses: $75 each, shipped.
dohc coil: $25
Nissan Consult Cable (streamlines live data to a laptop, performs active tests [i.e. put your nissan into timing mode without doing that damn "rain dance"], awesome tool for data logging! can perform ROM tuning/dumping with the proper software as well!): $70
I bought it, used it for a little bit, then upgraded to baller LCD consult interface. This shit still works good though, just requires the use of a laptop.
http://i27.tinypic.com/1tovig.jpg
Here's a description on what kind of cars it can be used on:
Car Support
Nissan Consult is supported on most petrol powered (generally not diesel) Nissans built in the 1990s. If the car has the female consult port (http://ecutalk.com/images/consultport.jpg), it will most likely support consult. There are exceptions to the rule, however. Consult is only supported on the Nissan ECUs, so replacement ECUs like the PowerFC, etc, will not support it (remapped/daughterboards ECUs or those with piggybacks like SAFC should be fine). Also some late model cars from 1999 may have an OBDII port and a Consult port, but only retain the consult port it for ancilliary systems (like AT, AirCon, HICAS, etc) diagnostics, but the main ECU may be OBDII.
Here's a link to the site where I purchased it from.
ECUTalk - Consult Cables (http://ecutalk.com/interface.aspx)
It's from Australia, so it's kangaroo scented as an added bonus!
Cheap quick releases, two available, one red, one some weird color. (hella JDM, bro): $20 each.
http://i27.tinypic.com/292s0wn.jpg
http://i31.tinypic.com/5bpumq.jpg
And I'll probably be putting my apexi AVC-R up for sale soon too, if anyone is in the market for an EBC, so let me know.
Sold most of the other stuff, here's what's left! Everything is OBO.
SR20 dump pipe/down pipe/cat delete combo: $110
http://i40.tinypic.com/2ive81e.jpg
GT-R 32 Driver's side seat plus modified seat rail (4th tab moddes to fit in S chassis) $250
http://i41.tinypic.com/21owjgk.jpg
Recaro knock off passenger side seat+seat rail: $80
http://i39.tinypic.com/llb4l.jpg
180sx center piece: $50
http://i43.tinypic.com/9fo94x.jpg
ROM stuff, each board will come with 2 chips.
SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors
I've got 2 of them, $50 bucks each
http://i44.tinypic.com/263fyx0.jpg
Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them. $60 each.
http://i39.tinypic.com/24dopk3.jpg
Newer SR20DET board (type x motor, s15 motor, s14 motor) $70
http://i39.tinypic.com/5wl9a8.jpg
93-94 KA24DE stuffs:
2 main ecu/engine harnesses: $75 each, shipped.
dohc coil: $25