S14 partout lots of parts! Navan, Stance, PBM, Buddy Club

[Adam496]

I've been working on a s14 for a few years and i cannot find the time to complete it. Everything must go.. I've toyed around with the idea of getting rid of everything but this time im serious. Buyer is responsible for shipping and pp fees. I am located in NNJ and can meet around the tri state area.

Updated 8/1 with more pics. I am working on adding more.

First off is some things i have laying around

Stock front bumper with pignose front lip $100
http://img.photobucket.com/albums/v255/adam496/newbumper.jpg

- z32 maf - have plenty of pigtail to wire up, screens intact - $80
http://i39.tinypic.com/2dtc5dz.jpg
http://i39.tinypic.com/ofna5w.jpg
http://i41.tinypic.com/1676utl.jpg

- Works bell S14 steering (http://zilvia.net/f/#) wheel hub - $80
Keeps your clock spring so you can use your horn, and turns off your air bag light.
http://i40.tinypic.com/w1bmnc.jpg
http://i43.tinypic.com/2eebksj.jpg

- 320mm MOMO Racing Line Wheel F/S. The wheel has very minor scuffs on the underside of the leather $50

http://i42.tinypic.com/adhkps.jpg
http://img.photobucket.com/albums/v255/adam496/wheel2.jpg (http://img.photobucket.com/albums/v255/adam496/wheel2.jpg)

Corbeau Bucket Seat - 2 imperfections can be seen in pictures - $150
http://i44.tinypic.com/54vrcm.jpg
Back of seat
http://i40.tinypic.com/23m0jv4.jpg
http://i43.tinypic.com/21oqasi.jpg

On to the car itself
Here are pictures on how it sits now. Everything must go.. All parts are were installed new and never used unless noted.

Some notable items are
http://i27.tinypic.com/x10mcy.jpg
-Navan front bumper $300 (used)
http://i29.tinypic.com/5vyuz9.jpg
http://i26.tinypic.com/303h5cl.jpg
-Buddy Club spec II $275 (used)
http://i32.tinypic.com/2hrfwvs.jpg
two dents
http://i32.tinypic.com/e7jjnb.jpg
-Aluminum Intake for t25 $30. It's a little rough has nipple for bov recirc and oil catch can. $10 if you buy the fmic and bov
http://i29.tinypic.com/9zmfl.jpg
http://i27.tinypic.com/20f5dx.jpg
-New S14 5lug front hubs $170
http://i25.tinypic.com/2cy19pw.jpg
http://i27.tinypic.com/2vm65jp.jpg
-Complete 300zx 26mm front brake swap (rotors, brake lines, pads, calipers) $350
-Complete rear 300zx brake swap E-brake assembly (used), R33 e-brake lines (new) calipers, rotors and pads (used), brake lines (new). $350
-Isis fmic kit red top. flanged for greddy bov, hotpipe has added nipple for wastegate. $325
-Greddy type s bov $150 or $125 with purchase of fmic kit (used)
- Red top VC $50
http://i32.tinypic.com/23hu24p.jpg

- Mishimoto Aluminum Radiator $175 A few bent fins here and there nothing major.. Oem rad hoses for an additional $15 with purchase of rad
http://i25.tinypic.com/30bkcwh.jpg
http://i27.tinypic.com/sb3hht.jpg

Anything else you see that you are interested in Let me know. More pictures are available upon request. I will start taking it apart when people start buying. Larger items, such as the motor and shell, pm me to discuss it further.

http://i29.tinypic.com/692xsn.jpg
http://i29.tinypic.com/2mmbcxc.jpg

[fashnootin]

Price on front lug hubs picked up?

[2fast4y0u]

are you parting the interior? if so, how much for the radio trim bezel?

[g_mac530]

Interested in the PBM RUCA and toe arms. I have cash and I'm in PA LMK

[Charles240]

Do you have the Shiftboot and assembly ?

[mad-ass]

any possible way you can sell me just the S14 ABS light off thing?

[SWAT Team S14]

Have any better pics of the spec 2?

[nissangtr1]

that hub should fit a nardi wheel right?

[Adam496]

Price on front lug hubs picked up? $175

are you parting the interior? if so, how much for the radio trim bezel?

Yeah the whole car needs to go, but i don't have that. Sorry

Interested in the PBM RUCA and toe arms. I have cash and I'm in PA LMK

I think you pm'd me?

Do you have the Shiftboot and assembly ?

Sorry don't have it

any possible way you can sell me just the S14 ABS light off thing?

Can you clarify what you mean?

Have any better pics of the spec 2?

I'll take it off and get some better ones for you tomorrow.

that hub should fit a nardi wheel right?

I'm not going to say it does because i have no clue. I've only had a momo wheel on it.

[paraplegic]

willing to do 100 + shipping for the PBM RUCAS?

[carlfer]

Do you still have the rearview mirror and rear seat belt buckles. Thanks

[negrosx13]

any chance selling the shell?

[2jz240]

how much for the shell give me a call 6464672488

[silvialove]

Willing to sell the driver side FLCA?

[Rogue_S14]

interested in the seat. what size is it and does it come with brackets/sliders? text me @ 917 361 8138 also want the sr power steering pump if u parting it

[charles13]

still have the front seatbelts? if so price shipped to 85365?

[andyv316]

what size turbo, t25? if so willing to sell?

[Adam496]

willing to do 100 + shipping for the PBM RUCAS?

Sure $60 for shipping

Do you still have the rearview mirror and rear seat belt buckles. Thanks

Yeah i still have them. Shoot me a pm with your zip.


any chance selling the shell?

Of course i am. Let me get all of the aftermarket stuff off and then we'll talk.

how much for the shell give me a call 6464672488

Same as above. If you'd like send me a pm to discuss, if not i'll call you at the end of the week.

Willing to sell the driver side FLCA?

Not as of now. i'd like to at least have a rolling chassis so i can get it out of my house.

interested in the seat. what size is it and does it come with brackets/sliders? text me @ 917 361 8138 also want the sr power steering pump if u parting it

I'm like a 32 waist and it fits pretty well.. I would say max 36 to 38. For $275 i can do the seat and a Bride MO rail.

still have the front seatbelts? if so price shipped to 85365?
I'd like to sell those with the shell but let me see what happens.

what size turbo, t25? if so willing to sell?

Yupp t25.. it has stripped threads where one of the studs go. Make me an offer.

[andyv316]

Yupp t25.. it has stripped threads where one of the studs go. Make me an offer.[/QUOTE]

let me check with a local guy to see if he still has his t25, but if I offered 60+ shipping, and do you know if its good, no smoke or any play?

[wh0aitznic0]

Sent you a PM about the steering wheel.

[SWAT Team S14]

What side is the MO rail for? Willing to sell that seperately?

[silvialove]

Alright, but if you change your mind lemme know :)

[GeneStarWindGSW]

PM'ed u bout the toe arm/tension rods.
cash in hand

[LoFoSho]

sent you a PM...

[Adam496]

Btw don't waste my time with low ball offers. If i don't respond to your pm try again...

What side is the MO rail for? Willing to sell that seperately?

Drivers side.. Yupp $160

Alright, but if you change your mind lemme know :)

Will do..

Yupp t25.. it has stripped threads where one of the studs go. Make me an offer.

let me check with a local guy to see if he still has his t25, but if I offered 60+ shipping, and do you know if its good, no smoke or any play?[/quote]

I should be good but i never ran it. I will know for sure when i take it off.

[mad-ass]

I just want the connector to turn the ABS light off that came with your works bell hub. Nothing else.

[Adam496]

I just want the connector to turn the ABS light off that came with your works bell hub. Nothing else.

Nope sorry that goes with the hub

[msanchez]

Never heard anything back about the toe rods and dp..

[SWAT Team S14]

Drivers side.. Yupp $160


Need a pass side :-/

GLWS, anyways bro.

[dahrayyal]

hey adam, i PMed you a long time ago and you said you would give me a quote for the pbm rucas and toes. and no quote yet. soo yeah. and your inbox is full so i cant PM u anymore. so im telling you here, cause u seem to check this place.

[Adam496]

hey adam, i PMed you a long time ago and you said you would give me a quote for the pbm rucas and toes. and no quote yet. soo yeah. and your inbox is full so i cant PM u anymore. so im telling you here, cause u seem to check this place.

Well right now they are pending.. They fit in a flat rate box so for shipping it will be $12 for each set. I might be able to fit more then one set in a box too. PM box is clear sorry.

[BDMs14]

hey man, you have a PM!

[Adam496]

Bump number 1

[Christophikis]

PBM RUCAS picked up this week for your asking price, let me know.

[240sxluver4life]

PM'ed about driveshaft

[Adam496]

PBM RUCAS picked up this week for your asking price, let me know.

Sold sorry

PM'ed about driveshaft

Yeah i have it. I'll txt you in a bit..

PBM arms and flex cobra DP are SOLD

[jaykemurd]

How much to ship the red S14 bumper to 40047?

Do you have the bumper retainer as well?

[p0onsta]

hey where are you located? might be able to pick up:
need spare tire jack, jack bracket, and tools. don't need the spare. could use the trunk cover too though. how much for that picked up?

[Str8silvias14]

Letme know ifyou still got them and for how much I'm in socal.

[iviScYth3ivi]

Highly interested in the seat, im local PM me thanks

[Ninjamasta04]

Pm me the price for front bumper support. Where are you located in NJ?

[Turbo Nismo]

How much for the front lip? LMK ASAP please.

[Adam496]

How much for the front lip? LMK ASAP please.

Somebody is interested in bumper/lip. I'd rather sell it together. But ill let you know if that falls through.

Pm me the price for front bumper support. Where are you located in NJ?

07480 I'll take $60 for it.

Highly interested in the seat, im local PM me thanks

PM'd

How much to ship the red S14 bumper to 40047?

Do you have the bumper retainer as well?

I do have the retainer. $60+ shipping. Let me check on shipping for the bumper.

hey where are you located? might be able to pick up:
need spare tire jack, jack bracket, and tools. don't need the spare. could use the trunk cover too though. how much for that picked up?

I don't have any of that. Sorry

Let me know if you still got them and for how much I'm in socal.

Pm'd

Items Sold
-Driveshaft
-PBM Arms and DP
-Rear calipers and R33 lines.
-Stance Coilovers

[1slowS13]

so any more aftermarket suspension parts left?

[Andrewv16]

Im interested in the turbo setup and a few odds and ends. Can you send me a PM?

[Adam496]

so any more aftermarket suspension parts left?

I have a cusco rear swaybar, let me double check. that is it.

Im interested in the turbo setup and a few odds and ends. Can you send me a PM?

Pm'd

SOLD
OEM bumper /w pignose lip
Driveshaft

[s14_driver]

what yr is it? if 96+ do you have the driverside window switch? and how much shipped to 92504

[Adam496]

what yr is it? if 96+ do you have the driverside window switch? and how much shipped to 92504

Car is a 95. The window switch is staying for now. I have somebody interested in the shell

[Adam496]

Bump # 2

Navan is sold

[ae13bravo]

Interested in the Hub and Steering wheel. Check your PM's.

[KOUKIboy]

Do you still have the hub and steering wheel??? if so how much shipped to Phoenix AZ 85033....Thanks........

[camwhore]

yah, PMs are full.
would love that exhaust, and soon.
PM me or txt 4124785935

[scooby steve33]

pm me a price shipped on the just the steering wheel and seat to 23061 thanks.

[Adam496]

Do you still have the hub and steering wheel??? if so how much shipped to Phoenix AZ 85033....Thanks........

Yupp $145 shipped paypal. The guy above you is also intersted. If you want it lmk money talks.

yah, PMs are full.
would love that exhaust, and soon.
PM me or txt 4124785935

Pm'd

pm me a price shipped on the just the steering wheel and seat to 23061 thanks.

The seat is one thing i wont ship, sorry. For the wheel $63 shipped.

[ae13bravo]

Yupp $145 shipped paypal. The guy above you is also intersted. If you want it lmk money talks.

Paypal'd the money for the wheel and hub last night........ check your paypal.

[ae13bravo]

Thanks! Just got the wheel and hub today.

[RB180sxChris]

how much for the coilovers? what type are they?

[racerx2k1]

4 month old thread.