PDA

View Full Version : New Turbo Arrive!! 300ZX GSP-600 Twin Turbo Direct Bolt on!!


Fatboy Garage
07-28-2010, 01:21 PM
GSP-600 Twin Turbo for 300ZX (MT and AT)

This turbo is direct bolt-on application, the turbo might look the same as stock but the wheel is way bigger than the stock one, perfect upgrade for people want to replace their old turbo, Will fit MT and AT but AT will spool little later than the MT due to the Gear Ratio on the AT.

We had this our test car, 95 bone stock 300zx MT with about 150k miles on it, pushing about 412whp and 386wtq.

http://i49.photobucket.com/albums/f263/kensua6/300zx600_2.jpg

http://i49.photobucket.com/albums/f263/kensua6/300zx600_3.jpg

http://i49.photobucket.com/albums/f263/kensua6/300zx600_4.jpg

TURBO SPEC :
Compressor Trim 60
Exhaust Trim 63
Intake side inducer 46.48
Intake side exducer 60
Exhaust side inducer 53
Exhaust side exducer 47.12
Internal wastegate set at : 12 psi

I have 5 pair special price $730 Shipped and good till end of Aug.

Thanks

Ken,S


Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ask for Ken
W:godpeedproject.com (http://www.godspeedproject.com/)
Paypal:[email protected]

Darude
08-15-2010, 10:03 PM
looks good, any sales yet? I may pick some up

jrocslider
08-15-2010, 10:46 PM
98 motor? they only sold them til 99 in mexico and canada for north america.

NismoTuner21
08-15-2010, 11:44 PM
So wait, those numbers were achieved on 12psi? What kind of dyno? How is it bone stock, there is no way the stock 370cc injectors could achieve that, and what tuning software did you use on a 98 Z32? Because no one makes any for a Z that's 96 and up. I'm actually interested in the turbos, but I just don't see how those numbers were achieved on a "bone stock" 300ZX. Also, why are there dual ports on the wastegates?

Fatboy Garage
08-16-2010, 11:15 AM
98 motor? they only sold them til 99 in mexico and canada for north america.

lol....Sorry about that did a Typo the car was actually 95

So wait, those numbers were achieved on 12psi? What kind of dyno? How is it bone stock, there is no way the stock 370cc injectors could achieve that, and what tuning software did you use on a 98 Z32? Because no one makes any for a Z that's 96 and up. I'm actually interested in the turbos, but I just don't see how those numbers were achieved on a "bone stock" 300ZX. Also, why are there dual ports on the wastegates?

everything is bone stock, nothing change and the Daul Port wastegate is for you to run EBC so you can run Hi/Lo Boost

NismoTuner21
08-16-2010, 06:48 PM
Ahh I see, do they come with any kind of warranty? Do you HAVE to use both of the ports on the wastegates? And what's the max recommended boost to run on these?

Fatboy Garage
08-16-2010, 07:43 PM
Ahh I see, do they come with any kind of warranty? Do you HAVE to use both of the ports on the wastegates? And what's the max recommended boost to run on these?

Yes it come with 1 Year Warranty but have to be install it by ASE Credited mechanic.

no you dont have to, all you have to do is plug the other port if you dont want to run it.

Thanks

Ken,S

(http://www.google.com/aclk?sa=l&ai=CgsJ10uZpTInkJp2ZlQeNnbDPA6GUrl657ZLpDu36-jcIABABILZUUOWfvI_5_____wFgyZa2iZCk6A-gAYGV6P4DyAEBqgQgT9B7yB6_5dUMPAct7nrov6CHBwL-ABiyZeSh6g3KMa6ABZBO&ggladgrp=6782089173943051693&gglcreat=6630740528425300125&sig=AGiWqtxlNKEa7umwAejuzV1PCt0uZR4oBg&adurl=http://www.uti.edu/Default.aspx%3Fadsource%3DGoogle_Auto_NonBranded)

Fatboy Garage
09-02-2010, 02:17 PM
2 more left.!!!

Fatboy Garage
10-11-2010, 12:03 PM
1 more Left!!!!

Fatboy Garage
10-18-2010, 01:03 PM
One more left!!!!!

Boostage
03-25-2011, 10:36 AM
damn I want a pair of these for my twin setup but $730 ...ehhh