R33 gts rotors( were to buy)

[skyvia25]

i did a R33 gts caliper swap n had to some how fit g35 rotors on my s14. but i bn looking for some original R33 rotors for my calipers any one know were i can pick some up tnx..

[wh0aitznic0]

Aren't the non-GTR calipers the same as 300zx 4pots instead of Brembo? If so, get OEM 300zx.

[mattack69]

:ddog: (http://lmgtfy.com/?q=R33+rotors)Let me google that for you (http://lmgtfy.com/?q=R33+rotors)+

[c72c]

Aren't the non-GTR calipers the same as 300zx 4pots instead of Brembo? If so, get OEM 300zx.

If they're GTS-25 calipers they use the same rotor as the n/a Z32

R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)

Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)

[skyvia25]

kul tnx for the info ama try z32 rotors, i was just a not sure on wich ones to try. i aslo dont know wats the difrence between ohter nissan salipers, n z32 calipers they kinda of look the same...

[unlegendary]

really? it seemed like you knew what you were talking about in this thread

http://zilvia.net/f/tech-talk/233811-r33-gtr-vs-gts-brake-calipers-2.html

how many pots do you have in your caliper? 4 or 2? did u make brackets for the g35 rotors? do you have pics of the lexus gs rotors?

[MrMcgarrett]

Are these the calipers you have?

http://i92.photobucket.com/albums/l5/MrMcgarrett/r33brakes005-1.jpg

If so use 97-01 Q45 rotors.
They are cheap and you can get them at any auto parts store.
I got some from Autozone for $35 each.
They are the same diameter as R33 rotors(296mm) just 2mm thinner(28mm).

[ki_JDM_ds]

Are these the calipers you have?

If so use 97-01 Q45 rotors.
They are cheap and you can get them at any auto parts store.
I got some from Autozone for $35 each.
They are the same diameter as R33 rotors(296mm) just 2mm thinner(28mm).

I have this same set up, works great.

[skyvia25]

really? it seemed like you knew what you were talking about in this thread

http://zilvia.net/f/tech-talk/233811-r33-gtr-vs-gts-brake-calipers-2.html

how many pots do you have in your caliper? 4 or 2? did u make brackets for the g35 rotors? do you have pics of the lexus gs rotors?

i really dont know the difrence between 4 pot n 2 pot, but this is a quick pic i took this morning. i just want some rotors i can put in with no mods, the curent ones i have on i had to grind down a little the center hole to make them fit in poperly

http://i226.photobucket.com/albums/dd162/real_053/2010-07-21075416.jpg
http://i226.photobucket.com/albums/dd162/real_053/2010-07-21075442.jpg

[c72c]

i really dont know the difrence between 4 pot n 2 pot,

4 pot (4 piston) calipers are what is in your pic. they have two piston on the front side where it says nissan, and two on the back side.


2 pot - 1 front, 1 back. normally the rear of z32, 33, and almost all skylines from r32 up with exception to the 4 door base models and maybe a few others.
http://rs13.kasik.name/upload/tech_info_imgs/R32_Z32_rear_aluminum_2_piston_calipers.jpg

1 piston are what comes stock on 13,14, and so on.... they have 1 piston on the back side.
http://images2.carpartsdiscount.com/auto/archive/pictures/81844/600/1/P/2C48DF5/nugeon_front_caliper_rebuilt.jpg

[Mirage]

You can call your nissan dealer (or favorite online dealer) and tell them to order you up one of each 40206-05U10 and 40206-05U11 from Nissan Motorsports (or order from Motorsports directly) for blank 296x32 rotors (they fit in my R33 GTS-T calipers just fine, with brand new pads) they are about $100 a piece though. If you want crosscracked, I mean crossdrilled, order 40206-05U02 and 40206-05U03, those are almost $140. Nismo calls the blanks R32 Skyline GT, while the crossdrilled are GT-R

Whatever you do, don't waste your money on DBA 4000's, not unless you want your slots to disappear in a year. I was told they were shit by an aussie after I originally got them, now I know why he said they quit buying them over there.

[skyvia25]

4 pot (4 piston) calipers are what is in your pic. they have two piston on the front side where it says nissan, and two on the back side.


2 pot - 1 front, 1 back. normally the rear of z32, 33, and almost all skylines from r32 up with exception to the 4 door base models and maybe a few others.
http://rs13.kasik.name/upload/tech_info_imgs/R32_Z32_rear_aluminum_2_piston_calipers.jpg

1 piston are what comes stock on 13,14, and so on.... they have 1 piston on the back side.
http://images2.carpartsdiscount.com/auto/archive/pictures/81844/600/1/P/2C48DF5/nugeon_front_caliper_rebuilt.jpg


shit i didnt know pot was the same as pistons, kull then well with that said i think ill take a drive to the nismo shop to pick up some blanks, i guess i was just a little confuse with all this z32 n skyline rotor sizes n picking the right ones for my s14 tnx once again...