Lots of SR S13 180sx Parts

[okigsxr]

I am moving back to Japan, so I have decided to part out my RPS13 here in the states, since I intend to rock out an S15 once I get there. Everything is for a SR. Prices do not include shipping or paypal fees. I am located in Jacksonville, NC if anyone wants pick up, but I don't mind shipping.

If you are interested in some other stock parts, please PM me.

IF YOU ARE INTERESTED IN SOMETHING, PM ME, I WILL NOT RESPOND TO REQUEST ON THE THREAD

ALL PARTS LISTED HERE ARE OUT OF THE CAR AND ARE AVAILABLE RIGHT NOW, UNLESS THEY ARE NOTED AS "PENDING SALE"




Apexi Power FC with Commander　（D-Jetro, no MAF required)--650
Sorry MAP Sensor not shown on first pic, it is shown on the second pic. Everything needed will be included. This Power FC has less than 5k miles on it. It is nearly brand new and works perfectly.



http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0001.jpg

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0094.jpg

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0003-1.jpg


Veilside Rear Spoiler--$150

http://i232.photobucket.com/albums/ee31/okigsxr/car1-1.jpg
http://i232.photobucket.com/albums/ee31/okigsxr/car-1.jpg


Type OS, Type 2 Cusco Front Strut bar--$100
http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0013.jpg


Type OS-T Cusco 3pt rear strut bar set (comes with all three, complete kit)--$180.

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0015.jpg


Billion Radiator hose kit--$60

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0052.jpg



Cusco Comp S Coilover Set--$900

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0076.jpg


(1) Takata 3" 4 point Harness--$200

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0032.jpg

(1) Sabelt Harness--$40

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0030.jpg

Apexi avcr boost controller--$350

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0061.jpg



Transmission--$175
Excellent condition, 5 spd SR20, very smooth shifting.



Blitz 65050 Single Disc Active Clutch System with lightweight flywheel--450
PM me if you would like pics.

GT mirrors--$40

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0079.jpg
http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0078.jpg

Fiberglass hood--$150

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0077.jpg





h4 hid light kit--$40--one side has a tab snapped off, it never effected the light whenever I used them, because of the little spring that holds them in.-Pending Sale

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0045-2.jpg

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0047-2.jpg




Splitfire Ignition Coilpackｓ--$250

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0065.jpg
http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0064.jpg


Large sway bar--$40

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0082-1.jpg
http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0083.jpg

Greddy oil paｎ--250


walbro fuel pump--50

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0092.jpg

koyo 2 core aluminum radiator--200
Does not include cap or fans

http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0087.jpg
http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0088.jpg

Nismo radiator cap-$10--need a pic, please look at radiator pics, directly above

greddy blow off valve--150


http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0066.jpg


dual flexalite fan kit--200


http://i232.photobucket.com/albums/ee31/okigsxr/DSC_0089.jpg



Kouki Type X 180sx Seats, passenger and drivers side (perfect condition)--600--pending sale

Stock seats--no rips--$50

Dash--no cracks, excellent condition--100

HKS Catback Exhaust (with a-spec muffler)--$200

Cusco Motor Mounts--$150

[240Zfunahollic]

How much you want for those splitfire coils?

[chaseSR86]

Dibs on the strut bar

[Midori]

do you have pics?

[inertia89240]

Hey, how much are your cusco coilovers, drilled rotors, the koyo radiator and the greddy bov?

[sickturbo]

Interested in the 5 LUG kit. Send me more details....

[k0uki]

pm sent....

[1gr8bar10der]

check your pm

[180sExy]

how much for the takata seat belts?

[okigsxr]

I will respond to everyone as quickly as I can. I will start taking a lot of pics tomorrow. I will try and get prices up here for everyone asap as well. Thanks.

[lbsam]

dude will you ship that LSD? let me know im interested cash on hand

[okigsxr]

How much you want for those splitfire coils?

275, thanks

[okigsxr]

do you have pics?

will start taking pics tomorrow. Thanks.

[okigsxr]

Hey, how much are your cusco coilovers, drilled rotors, the koyo radiator and the greddy bov?

koyo and greddy bov prices are updated above now. I want to get all of the exact specs on the coilovers. not sure on the rotors, didn't look up how much i paid tonight, I remember that they weren't much. Just make me an offer for those.

[okigsxr]

how much for the takata seat belts?

prices were updated, thanks

[okigsxr]

dude will you ship that LSD? let me know im interested cash on hand

I don't mind shipping, as long as you pay the shipping. I will get weight and stuff once I get it out. I assume you just want the whole pumpkin, and use UPS?

[Napalm]

dibs on i/c piping if you will seperate. you've got pm

[ka24det92]

pm specs on mounts and swap bars please

[wildkong]

pic of exhaust and size, what brand swaybar is that size? size and offset on wheels? pics of steering wheel, want that radiator cap too. dont really like he whole pm back and forth, you can just text me or email me stuff [email protected] or 4154055141 thanks

[1dead80sx]

How much for the whole car????

[TCtrackrunner]

How much for intercooler shipped to 78665 Round Rock, TX?

[ka-turbo]

pics and more info on the 5 lug swap...email me at [email protected]

[okigsxr]

How much for the whole car????

Please PM me an offer for the whole car?

Updated the list with some parts that I forgot was on the car. Took quite a bit of stuff off today, considering I only had like two hours. Should get a whole bunch done tomorrow though. :) Thanks everyone, I can't believe how many pm's and messages. I will get the info everyone is requesting as fast as I can.

[outlaw9958]

How much for the Project Nissan tension rods shipped to 37938?

[redline240sx]

I PMed you about the intercooler and thw windows.

[juiced305diesel]

model number an picks of the fans. pm me please

[drftx]

How much for the Project Nissan tension rods shipped to 60169

[SleepR 240sx]

I have dibs on the FLCA's. How much shipped to 29651?

[penco]

pics/price of arp head studs and koyo shipped to 53223?

[okigsxr]

Hello Everyone, thanks for all of your patience.
The dibs list has been made on the thread, they are next to each item.
If you have questions or would like to be added to a dibs list or call dibs on an item that doesn't have dibs, PLEASE PM ME!! I don't have time to check every entry on the thread. Sorry for the inconvenience. I will go through one time now and pm those that have not pm'd me to catch up. But from here on out, I will only check PM's.

If you are top of the list on dibs for an item and don't have pics or shipping prices please let me know and I will get the pics and prices up there nlt this weekend.
If you are not on top of the list for dibs, please don't ask me for shipping prices until your turn comes up if others back out.
I am getting a million pm's a day so it has been hard to accomodate everyone's request. Thanks.

[okigsxr]

Lots of pics, info, and prices have been added.

[outlaw9958]

I've got dibs on the tension rods and ss brake lines. Send me some pics and a price to [email protected] Thanks!

[sidedrifts13]

do you have the map sensor for the d jetro

[Lumos]

dibs on the greddy turbo outlet, what is your paypal?

[okigsxr]

Hey everyone, sorry, my work took me away from my computer for a while. I'm back and answering all pm's. Those that had dibs initially, but didn't email me back...I will email you again, if no response, the dibs will move down to the next person.

[okigsxr]

Engine is now out, lots more info coming. Updates on exact parts on car. Some parts that I thought were on the car, were not, The project nissan tension rods were actually cheap ebay crap, the braided lines on the brakes were also crap, sorry for those that were interested in those parts. But, on the bright side, the clutch is a Blitz Super Single System (includes lightweight flywheel), and the LSD is actually a cusco. Intercooler kit and turbo outlet have already been paid for, so they are sold.

[okigsxr]

Bump lots of info added.

[okigsxr]

Lowered some prices, updated some stuff.

[racerx2k1]

I will respond to everyone as quickly as I can. I will start taking a lot of pics tomorrow. I will try and get prices up here for everyone asap as well. Thanks.

Lots of pics, info, and prices have been added.

Hey everyone, sorry, my work took me away from my computer for a while. I'm back and answering all pm's. Those that had dibs initially, but didn't email me back...I will email you again, if no response, the dibs will move down to the next person.

Engine is now out, lots more info coming. Updates on exact parts on car. Some parts that I thought were on the car, were not, The project nissan tension rods were actually cheap ebay crap, the braided lines on the brakes were also crap, sorry for those that were interested in those parts. But, on the bright side, the clutch is a Blitz Super Single System (includes lightweight flywheel), and the LSD is actually a cusco. Intercooler kit and turbo outlet have already been paid for, so they are sold.

Bump lots of info added.

Lowered some prices, updated some stuff.

2 bump limit. You can start new thread in 3 days.