PDA

View Full Version : okay seriously..

thrasher324
07-14-2010, 09:13 PM
so on my rb25 i checked my timing once again to make sure it was perfect trying to figure out whats causing the bogging. but i realized oh wait my alternator wasnt running since the belt wasnt tight enough and i know my batterys dead so ill just go get a new one . so the new one turns on the car quick but the car doenst stay on anymore. it just turns on and the rpm goes little below 800rpm then dies in a mili second.

what the fk is going on
DeatschWerks
07-15-2010, 08:30 AM
Can you keep it running by giving it a little throttle?
thrasher324
07-15-2010, 02:22 PM
Can you keep it running by giving it a little throttle?


i used to be able to until after i changed out the battery. now it just doesnt keep it up anymore. it starts and dies in a quick second. it just gives out
Sileighty_85
07-15-2010, 04:13 PM
Have you Adj the CAS accordingly?
thrasher324
07-16-2010, 02:42 PM
Have you Adj the CAS accordingly?


haha uh...ive like seen the picture on how to do it but i was kind of confused plus i thought it only goes in one way so. thats what i did lol.

how do i adjust it ?
Sileighty_85
07-16-2010, 02:55 PM
haha uh...ive like seen the picture on how to do it but i was kind of confused plus i thought it only goes in one way so. thats what i did lol.

how do i adjust it ?
Right it only goes in one way but depending on which way you turn it determines your Timing.

Like SR require is set at 15*
thrasher324
07-16-2010, 03:01 PM
Right it only goes in one way but depending on which way you turn it determines your Timing.

Like SR require is set at 15*

i mean i did make a marking so i would put the cas back in the exact same way. so if i did turn it its probably just by little bit..
Sileighty_85
07-16-2010, 03:06 PM
how old are the spark plugs?
thrasher324
07-16-2010, 03:19 PM
how old are the spark plugs?


its brand new. i gapped it to 0.8 mm if thats right. i heard ppl gap it to 1.1 mm or something but i just kept it to 0.8
thrasher324
07-16-2010, 07:45 PM
bump anyone?
thrasher324
07-17-2010, 03:24 PM
bump. help anyone? please?
thrasher324
07-18-2010, 03:46 PM
BUMP come on guys
Sileighty_85
07-18-2010, 04:25 PM
unplug the MAFS and see if that helps
thrasher324
07-22-2010, 07:04 PM
okay when i unplugged the MAF it started right up no problem but it still died.

okay i tried again and it starts with the maf on or off. but it boggs liek crazy and it dies most of the times.
thrasher324
07-23-2010, 03:45 PM
bumpbumpbumpbumpbumpbumpbumpbumpbumpbumpbump