wheel question

[jdmm]

i got some 15" rims i wanna rock on my s13 4 lug. i have stock lugs what are some good size spacers to get to slamm my car? i wanna make it look flush! am i going to have to upgrade my studs? the rims are 0 offset just like the stock se rims
thanks

[derek king]

Winning is happening

[Landers]

Check out the wheel fitment whore thread.

[jdmm]

not to many people have 15"s on there. i found a couple but doenst say what size spacers were used.

[Forge_55b]

you don't have wheel width so no idea. Just put them on and see how sunken in they are and get a spacer that will space it out that much.

[jdmm]

the rims i want to put on are enkei rpo1 15" idk the offset

was also wondering whats a household product i can use to clean off the rims. i tried soap and water and it only gets a little of dirt off. its pretty caked on there. could i wet sand with 1200 grit paper? would it scratch the rims

[ericcastro]

Gotta be a TROLL.

No one is this clueless.

Get some rim cleaner.
15's will never look flush because you cant get a car that low.
If they are truely 0 offset, they are already past flush and rollin mexi status.

Please post picture of your car, or a link to a picture please!
along with rim pics.

[jdmm]

ive used some rim cleaner but it doesnt clean off some of the spots. ill try a different brand.
heres a pic of the rims. pretty sure they are 15x7
18954

[soreballz]

^Jack off on your wheels. The semen will strip the grime and gunk right off!

[Choku_Dorian]

type "wheel technical info" in your search engine.

Check out the wheel fitment whore thread.

no no no don't send these people in there.

[jdmm]

it is 15x7, thats what google says what size spacers would be good?

[PIN GIO 2]

diamond wheels racing?

[ericcastro]

put it on your car and take a fucking picture

[Forge_55b]

just get some 50mm spacers and throw them on. it will be perfect 100%

[allntrlundrgrnd]

http://upload.wikimedia.org/wikipedia/commons/6/61/Ivan_the_Terrible_&_son_-_detail.jpg

[jdmm]

my tire size is 205/50/15 zeix

what do you think? should i go more slammed?


http://i123.photobucket.com/albums/o296/kantblahdis1/DSC05313.jpg

[jdmm]

just get some 50mm spacers and throw them on. it will be perfect 100%


i need to save up for some wheel studs then

[soreballz]

Troll, troll, troll your boat...

[silviaworks]

that is not slammed...

[jdmm]

i know but its pretty low and i scrape on most things. how would 25 mm spacers look?
im gonna slamm it next weekend

[ericcastro]

you need a shot that looks down the car so we can see where the rims sit.

Like I stated above, you cant slam 15" rims.
16's, mmmaaaybe, but not with your stuff.

50mm spacers are bolt on, extended studs not needed.

Sell your car please.

[bshotts]

I wouldn't say you have to sell your car, but at least spend some time learning about wheel dimensions, offsets, and suspension pieces and what all is involved with slamming and flushing out your ride. We all had to commit at one point and learn it ourselves, and there will always be fine tuning that will have to be done to make it look right so we can only give suggestions anyway. I'd say save for now until you can at least get some 17s or 18s in decent width and offsets.

[joshchewuhh]

this thread is full of win!

shits hellaflush man

[sickrbs14]

dudes a dick
dont sell ya car jus but slame worthy wheels

[ericcastro]

dudes a dick
dont sell ya car jus but slame worthy wheels

Its odd that Im the dick, when I am the only one posting some real advice in here, lol.

Have you read the OP's other threads?
They get even worse then this.

MY sell the car statement means, The 240 community could really do fine without people that dont want to spend the 20 minutes to search and read about how things work, and instead waste everyones time with questions that have been answered back in 1999.

dude could answer all his questions in 30 minutes and be done,
Or just join NICO :)

[sickrbs14]

then quit wasting ya time responding to his thread :mephfawk:

[ericcastro]

then quit wasting ya time responding to his thread :mephfawk:

let me requote myself
"Its odd that Im the dick, when I am the only one posting some real advice in here, lol."

[sickrbs14]

and part of ya advice is sell the car great advice:mrmeph:

[Karlitos]

just to let you guys know offset is +35. i got those rims in 18's on my s14 so i reaserched them and 15x7 are +35. i wouldnt know about spacers but you are not slammed, and you have MASSIVE gaps. need 16 at LEAST but preferably 17's. i wouldn't take it as far as selling your car but do your research. i did and im still learning theres threads for everything on here and on other forums... google is your bff

[Sam_Well.13]

i have those wheels... on my honda.

[jdmm]

just to let you guys know offset is +35. i got those rims in 18's on my s14 so i reaserched them and 15x7 are +35. i wouldnt know about spacers but you are not slammed, and you have MASSIVE gaps. need 16 at LEAST but preferably 17's. i wouldn't take it as far as selling your car but do your research. i did and im still learning theres threads for everything on here and on other forums... google is your bff


im going to get bigger rims later on, im just gonna use these rims for a little while. i just wanna slam it and bring it out the rims a little. thinking of going 25 mm spacers 50 mm is gonna look too crazy huh

[landins13]

im going to get bigger rims later on, im just gonna use these rims for a little while. i just wanna slam it and bring it out the rims a little. thinking of going 25 mm spacers 50 mm is gonna look too crazy huh

measure the distance that the rim is sunken in inside the fender/quarter and get spacers then put the car on craigslist sell it and buy a civic.

[landins13]

dudes a dick
dont sell ya car jus but slame worthy wheels

you are 19, have 9 posts none of which amount to anything and you speak as if you are retarded, go home.

[jdmm]

ok sounds like a plan, thanks alot.

[jdmm]

you are 19, have 9 posts none of which amount to anything and you speak as if you are retarded, go home.

ok see you on the short bus tomorrow then landins.

[harangatang]

the idiots in this thread are abundant....:goyou:

First, I'd recommend heading over to here: http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html

See what you can find.. look around. Read first. Ask questions second.

And I would also recommend NOT slamming your car on 15's. Save your money and buy some 17's or 18's. And all the suspension parts to go along with slamming your car..

As for the spacers, if you're hell bent on doing this... take a measurement. How much space is between the edge of the tire and the inside of your fender? Find some bolt on spacers that will fill the gap accordingly. And say goodbye to your wheel bearings...

My :2c:

[handinpants]

I have those wheels in 17" the guy I bought them from rattle canned them gold but it looks good, I'll sell em to you for $350 with tires. I won't need them anymore cause I got my rota's powdercoated

[S14DB]

my tire size is 205/50/15 zeix

what do you think? should i go more slammed?

Your tires are to small. Get some 205/60-15 and it will fill out that wheel well better. It will raise it up but that's why you have coilovers to slam it back down.

You don't need wheel studs. Just get bolt on spacers.