Nismo FLCA, Zeal coilovers, SPL tension rods, full s14 5lug, z32 brakes, etc!

[Johny5]

alright lets start with all the pics...

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10372.jpg

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10371.jpg

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10373.jpg

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10374.jpg

S13 Nismo FLCA $150, rigid bushings where FLCA meets subframe that are in good condition, nice strong s14 balljoints in good condition as well. one needs the c-clip replaced, can get this at any parts store.

S13 Zeal coilovers $250, in need of some work, grab some bushings for the rear cups and replace a couple of collars and you're set. these have swift springs with heim joint upper plates up front.

S13 SPL Parts tension rods $120, excellent condition heim joints with all parts included, ready to install.

S13 strut tower bars front/rear $60 the front one is a "Juran" bar and needs new bolts which is easy to find at any hardware store and the rear is complete but no-name

-fiberglass wing of unknown origin. has nice well laid 6x1.25 bolt holes (4) so no BS pop rivet or anythign else kind of installation. $75

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10367.jpg

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/SDC10368.jpg


thats it for now, more coming up soon

aim: johny5notarobot
email: [email protected]

[TallPaul5950]

what are the spring rates on the coilovers?

[Johny5]

10/8

sdlkjafioleaswmfklaseca

[1gr8bar10der]

What version are those tension rods?

[Johny5]

1 or 2

Jfjjjihddhhj

[Def]

Those are v1.

[Dousan_PG]

message sent!

[Pirate_Freder]

wow, that's a steal on those Zeal's man. Are those Function B6? That's what I have and they look like mine. If I had the cash I'd buy them just to have an extra set for when I send mine in to get rebuilt.

Those rear lower bushings are only maybe $20 shipped from Endless-USA, and the collars should be reasonable too. Is that for sure all that's wrong?

[aoiken3]

will u ship the strut bars? pm me

[matts13vert]

willing to sell the z32 frt conversion lines? also are any of the zeals leaking?

[Johny5]

No im not parting the brakelines, strut bars 25 tp get them to cali and the zeals are pending

[JOEYZ240]

how much for just the front hubs ? and do they come with bearings ?

[nathanong87]

are they 26mm or 30mm calipers?

[pandapruitt]

willing to ship the zeals to 34761?

[Johny5]

Pretty sure brakes are 30s, what do you mean about hibs comimg with bearings? Did you mean the knuckles?

[Johny5]

coilovers are sold dudes please no more pm's haha

[JOEYZ240]

i need the hub bearings... got those ?

[rwdawg2]

I want the front hubs and 300zx brakes/rotors.

350 shipped to 30534.

Thanks

[iLagX]

the front lower control arm are s13 sorry to say..

[creyes13491]

are you willing to part out just the front hubs? thanks.

[Johny5]

rwdawg2, sorry to say dude but you're an idiot. you don't tell me my prices i tell you yours, you ecspecially don't cut almost 25% off with free shipping *facepalm

i don't necessarily want to part out the front hubs just yet, would rather keep them as a set.

iLagx: the balljoints don't appear to have been swapped on these control arms, and the shanks weren't modified, they bottomed out properly, etc. the knuckles on those balljoints were s14 knuckles that housed an oem 5lug front hub. i can measure s13 to s14 side by side but the balljoints a no brainer wouldn't you say?

[aoiken3]

No im not parting the brakelines, strut bars 25 tp get them to cali and the zeals are pending

can we do a nice quarterly number of $75 shipped to me here in cali?

[Johny5]

yo aoiken thats fine man we can do that, i pm'ed you my paypal and info.

also tension rods are gone, first post updated

[iLagX]

rwdawg2, sorry to say dude but you're an idiot. you don't tell me my prices i tell you yours, you ecspecially don't cut almost 25% off with free shipping *facepalm

i don't necessarily want to part out the front hubs just yet, would rather keep them as a set.

iLagx: the balljoints don't appear to have been swapped on these control arms, and the shanks weren't modified, they bottomed out properly, etc. the knuckles on those balljoints were s14 knuckles that housed an oem 5lug front hub. i can measure s13 to s14 side by side but the balljoints a no brainer wouldn't you say?

Do you see where the steering bump stopper is located? the s14 are half the size.

[Johny5]

hrmmm, thats definitely a good point. its been awhile since i've seen the bumpstops because both my cars have s14 FLCA's with them completely cut off. i'm gonna look into this since these FLCAs seem to have characteristics from both chassis. thanks for the heads up man :)

[hOngsterr]

the zeals are function D coils, who ever got them came up.

[Johny5]

iLagx was correct. these FLCA are s13 length with s14 balljoints for sure. good eye man!

[Souljahzs13]

the zeals are function D coils, who ever got them came up.

They're actually not Function Ds, front coilovers aren't inverted on these and dampening knob is on the wrong end.

[bikrman2]

how much for the bars to 12054?

[hOngsterr]

They're actually not Function Ds, front coilovers aren't inverted on these and dampening knob is on the wrong end.


good eye lol.

[Wake]

hey you want $60 for both STB's?

shipped to 95060?

[Johny5]

ok guys, after waiting awhile for payment on those coils i'm ending up posting them back up for sale, along with the tension rods. i had buyers back out on both. i also lowered the prices of everything else as i need it gone ASAP!!! please let this one bump go by mods i added the wing to the list from the other thread instead of bumping it too

[GenPac]

ok guys, after waiting awhile for payment on those coils i'm ending up posting them back up for sale, along with the tension rods.

^ this. PM sent.

[Johny5]

coilvoers sold!!! for real this time

[GenPac]

Coils received. Appreciative bump for you.

[heiyuu]

still got tension rods? are you shipping?

[Riq]

Wow back from the grave....

[heiyuu]

FML I thought the date was 2011 not 2010!!!