help with my intake manifold gasket

[thrasher324]

im not for sure but i heard the neo intake manifold is a bit different. which is what i have. and the intake manifold gasket that came with doesnt fit mine correctly.


in the first two pictures, i tried to fit it differently by flipping it
http://i45.tinypic.com/qrkq9t.jpg
http://i46.tinypic.com/2dqvdxy.jpg
for this one i just pulled it down a little bit it kind of fits but it seems like thats the only best way
http://i50.tinypic.com/200e8u0.jpg


anyone help?

[RichK14]

That looks like a gasket for some other intake, the holes in the gasket are much bigger than the runner holes. I'd say order the right one or make one yourself.

[thrasher324]

That looks like a gasket for some other intake, the holes in the gasket are much bigger than the runner holes. I'd say order the right one or make one yourself.


i think its different because i have the neo rb25...

[Sileighty_85]

where did you order it from?

According to Nissan FAST the Gasket you need for the NEO is 14032-AA500-

R33 RB25 Series 1 and 2 have different part numbers

[thrasher324]

where did you order it from?

According to Nissan FAST the Gasket you need for the NEO is 14032-AA500-

R33 RB25 Series 1 and 2 have different part numbers

yeah i think i did get the R33 gasket kit. its from nismoparts.com

where would be the best place to get the 14032-AA500? nissan dealership maybe? because im trying to get this asap

[thrasher324]

and another thing sil. would you happen to know any information about the oil feed line bolt? the bonjo bolt that goes onto the top of the turbo. i lost it mine somehow and i need to know the size so i can go to some auto shop and get it

[Sileighty_85]

Not sure of specs on the Banjo bolt but the part number is

16432-04U00

It has a restrictor built in so it needs to be that bolt

[thrasher324]

Not sure of specs on the Banjo bolt but the part number is

16432-04U00

It has a restrictor built in so it needs to be that bolt


so i actually found the bolt but where should i get the intake gasket? i cant find it anywhere online..

[Sileighty_85]

Contact Russell at Nissanparts.cc he should be able to order it for you.

[thrasher324]

Contact Russell at Nissanparts.cc he should be able to order it for you.


damnit its gonna take 6-8 weeks..
if i dont use the intake collector gasket would it cause a vacuum leak? or would i be fine w.o it? cuz its not the actually intake gasket. i have that one on already

EDIT : i cut it up a little bit just to fit it and im gonna just tighten them down. if all the other RBs use the rubber one like in the picture shouldnt it work on mine too?

[Sileighty_85]

damnit its gonna take 6-8 weeks..
if i dont use the intake collector gasket would it cause a vacuum leak? or would i be fine w.o it? cuz its not the actually intake gasket. i have that one on already

EDIT : i cut it up a little bit just to fit it and im gonna just tighten them down. if all the other RBs use the rubber one like in the picture shouldnt it work on mine too?

Yep it will cause a Vacuum leak and boost leak if you dont use the gasket.

If your old one is in one piece use that on e until you get the new one in.

Yeah but the Neo uses a different design, (for some reason your ports are smaller)

It will kinda work... it might seal but it will cause turbulence inside the Manifold since the ports will have that Gap between it.

[thrasher324]

Yep it will cause a Vacuum leak and boost leak if you dont use the gasket.

If your old one is in one piece use that on e until you get the new one in.

Yeah but the Neo uses a different design, (for some reason your ports are smaller)

It will kinda work... it might seal but it will cause turbulence inside the Manifold since the ports will have that Gap between it.


yeah thats the problem...i threw it out.. but yeah thats what im thinking.. if i tighten it down enough hopefully it'll seal. im just going to do that until i get the actual gasket for it. but what is a turbulence? is it bad?