PDA

View Full Version : Will sr20det specific exhaust fit on a KA24de?


dued
06-01-2010, 08:39 AM
Hi, I'm looking at an exhaust system for my s14. The product description states that the exhaust is for an s14 with sr20det only.

My question is, will this bolt up to my ka24de with stock header without any problems?? Are there any differences in the header angle or size between the two motors?

2d-ink
06-01-2010, 08:55 AM
I bought a ebay SR Catback for my S14, bolted up just fine.

D.Bo
06-01-2010, 08:56 AM
itll work...

omgRWDgoodness!
06-01-2010, 08:08 PM
As stated, it will fit just fine. Only difference is that 'SR' exhausts come with bigger piping (usually ~3") whereas KA ones are smaller, something like 2.5".

Hashiriya415
06-01-2010, 08:36 PM
You can call the moron from the shop/store and ask them to explain what they mean by SR fitment only. All it matters what diameter it is, 2.5" and 3.0" have same bolt pattern and if it bolts to the area of the stock cat, either before or after will work.

allntrlundrgrnd
06-01-2010, 08:39 PM
exhausts are chassis specific.

get 3" either way

240nismo
10-22-2011, 11:15 PM
will the stock header off a sr20det motor fit on a ka24de motor??

anti tyler
10-23-2011, 01:35 AM
NO, the bolt patterns are different. exhaust studs are like this:
KA:
http://thumbs2.ebaystatic.com/m/mDT8V4NAZFfhlr5_PSJemeQ/140.jpg

SR:
http://shop.rezlo.com/SA/images/uploads/Nismo_SR20_gasket_turbo.jpg

240nismo
10-23-2011, 10:33 AM
Thx ill let my friend know i didnt think it would

R33E8
10-23-2011, 10:51 AM
if its a turbo back exhaust it won't fit.. If its a cat-back exhaust it will..

fliprayzin240sx
10-23-2011, 04:11 PM
Its a damn exhaust, as long as its for your chassis, they all bolt up behind the cat. Doesnt matter what engine you have...