PDA

View Full Version : did my Clutch Slave Cylinder go out.

mau5trap
05-30-2010, 10:10 PM
clutch pedal kicks in but won't kick out.
Sileighty_85
05-30-2010, 11:42 PM
ummm check the fluid level and check the salve to see if its leaking.....
codyace
05-31-2010, 11:43 AM
bleed the system, check for leaks, search 'Clutch Pedal Thread'
mau5trap
05-31-2010, 07:27 PM
i got a question, what fluid do i use for the master cylinder?
codyace
06-01-2010, 10:20 AM
i got a question, what fluid do i use for the master cylinder?

271 posts
Member for 6 months

and you don't know how to search yet? Come on bro-ski, it's not that hard


DOT-3 Brake Fluid. If you daily drive it, any type will do. IF you track the car, run a better fluid (I prefer ATE Super Blue)
JKL1031
06-13-2011, 07:59 PM
i was disconnecting mines for my swap, and i broke the line like an idiot. removed the slave cylinder to find that I didnt have to break the line. it seemed to come all the way out, and limp to the side a bit. I hope i didnt bust it. it will go back in, but I'm just a lil worried.
curbhuggerrps13
06-13-2011, 08:36 PM
Remove clutch dampener box.
Edwin562
06-13-2011, 08:36 PM
271 posts
Member for 6 months

and you don't know how to search yet? Come on bro-ski, it's not that hard


DOT-3 Brake Fluid. If you daily drive it, any type will do. IF you track the car, run a better fluid (I prefer ATE Super Blue)

sooo worth the money.... ATE is the best.... i strongly recommend using it...