what tire fits

[GunmetalSR]

an 18x16 rim
i was thinkin for awhile bc ccw can make wheels in 18 and up to 16 in wide so i was jus curious who the hell makes a tire that fits that and where can u buy one and how much does it cost
gracias people

[racepar1]

They cost a a bajillion dollars each and they're made out of gold with diamond encrusted lettering on the side.

:duh:

[QuickSpoolSR]

dumb thread. Pirelli made 405's for some show car i saw.. i bet you could stretch these on em tho BFGoodrich g-Force T/A Drag Radial (http://www.tirerack.com/tires/tires.jsp?tireMake=BFGoodrich&tireModel=g-Force+T%2FA+Drag+Radial&partnum=43R8GFTADR&vehicleSearch=false&fromCompare1=yes)

[doublestitch180]

Looks like you can use a so called "truewidebody" for that. Whatever that means.

RU using a SR to turn those? because those rim aren't wide enough. Maybe a 18X100.lol

[slow40sx]

:gives: msglength

[Slammed Assassin]

damn!! i bet you can spin these with a sohc ka!

[Nizzan4u2nv]

thats retarded. with a 0 offset like half the rim would be in the trunk and half outside of the car. You would need like a triple stack widebody with a fender flare on top.

[GunmetalSR]

They cost a a bajillion dollars each and they're made out of gold with diamond encrusted lettering on the side.

:duh:wher can i buy those

dumb thread. Pirelli made 405's for some show car i saw.. i bet you could stretch these on em tho BFGoodrich g-Force T/A Drag Radial (http://www.tirerack.com/tires/tires.jsp?tireMake=BFGoodrich&tireModel=g-Force+T%2FA+Drag+Radial&partnum=43R8GFTADR&vehicleSearch=false&fromCompare1=yes)pirelli also made them for a 24 not an 18 and this thread was jus bc i was curious how u could hav such a rim but wat tire could u run

Looks like you can use a so called "truewidebody" for that. Whatever that means.

RU using a SR to turn those? because those rim aren't wide enough. Maybe a 18X100.lolwould i be using an sr...hell no i made this name when i was 16 and a jdm fan boy

:gives: msglengthyour mother

damn!! i bet you can spin these with a sohc ka!built with a stoopid big turbo runnin alcohol and meth with the biggest strech then maybe

thats retarded. with a 0 offset like half the rim would be in the trunk and half outside of the car. You would need like a triple stack widebody with a fender flare on top.it was a simple question of curiosity and who said 0 offset

[GunmetalSR]

bump for curiosity

[Drifting-pedobear]

bump for curiosity

balls.

after that shit storm he bumps his thread lol.


so... when is google back up and running? sucks that its down, otherwise this would be a really easy question...

[GunmetalSR]

balls.

after that shit storm he bumps his thread lol.


so... when is google back up and running? sucks that its down, otherwise this would be a really easy question...
haha bc i want to know and hey they started the shit storm i jus asked a questin that has a definite answer and yes i spent hours on google and havnt really found anything but im not a tire specialist so i was hoping the flaming zilvia community could help bc they hav before
ur sn is amazing by the way

[doublestitch180]

would i be using an sr...hell no i made this name when i was 16 and a jdm fan boy



So what are you using? Just out of uhh......curiosity.

[GunmetalSR]

So what are you using? Just out of uhh......curiosity.
an ls7 but thats still not why i even asked
i wanted to buy some ccw's and noticed that they can make them as wide as 16 inches and whatever offset u want so that why i was curious to know if they even make a tire for it...not sayin im buyin 18x16's i was jus curious and dude sorry for bein a dick but everyone flamed me n i didnt get one seerious answer

[widebodyseven]

an ls7 but thats still not why i even asked
i wanted to buy some ccw's and noticed that they can make them as wide as 16 inches and whatever offset u want so that why i was curious to know if they even make a tire for it...not sayin im buyin 18x16's i was jus curious and dude sorry for bein a dick but everyone flamed me n i didnt get one seerious answer
Email CCW and ask

[rps13sr]

maybe you can email who ever drives grave digger now and ask him ;)

[Gnnr]

A serious answer...ugh....

Goodyear Race Tires || Eagle® Dragway Special® (http://www.racegoodyear.com/tires/)

They can custom make anything. They have these two sizes so I'm sure they can make the dragways in 18 or make the Radials in 16.

Goodyear Eagle Dragway 33.5x17-16
Eagle Radial Sports Car 28.5x14.5-18

18s in that width are not going to be made, they do have them in 14, 15, 16, and 17. No 18. Tires using those widths are also offered in half sized like 17.5, 18.5, 19.5, 20.5 etc for commercial applications by Michelin. Again, no 18. So closest is 17.5 or 18.5 that is offered without custom ordering. The width here is not the problem.

/end stupid thread

[GunmetalSR]

maybe you can email who ever drives grave digger now and ask him ;)hahahaha

A serious answer...ugh....

Goodyear Race Tires || Eagle® Dragway Special® (http://www.racegoodyear.com/tires/)

They can custom make anything. They have these two sizes so I'm sure they can make the dragways in 18 or make the Radials in 16.

Goodyear Eagle Dragway 33.5x17-16
Eagle Radial Sports Car 28.5x14.5-18

18s in that width are not going to be made, they do have them in 14, 15, 16, and 17. No 18. Tires using those widths are also offered in half sized like 17.5, 18.5, 19.5, 20.5 etc for commercial applications by Michelin. Again, no 18. So closest is 17.5 or 18.5 that is offered without custom ordering. The width here is not the problem.

/end stupid threadthanks for finally anwerin my question

[doublestitch180]

Might want to try silviav8forums.com (I'm on there) or ls1tech.com

[atutt]

an ls7 but thats still not why i even asked
i wanted to buy some ccw's and noticed that they can make them as wide as 16 inches and whatever offset u want so that why i was curious to know if they even make a tire for it...not sayin im buyin 18x16's i was jus curious and dude sorry for bein a dick but everyone flamed me n i didnt get one seerious answer

Damn son you gots lots of monies to throw around if you're buying a $15,000 motor (That doesn't come with a harness or PDM no less).... for an s-chassis, lol

But in a serious note. I have wondered the the same thing.
CCW actually makes all their rims up to 16'' in width I believe.

[racepar1]

How fucking stupid are people here???

16" is the width of the rim.

Tire section width is measured in millimeters.

Convert 16" to millimeters then you have the section width tire that you are looking for.

You are not going to find anything though so you are going to have to find the "best" fit.

You'll likely still not find anything close enough in street tires though and will have to use non-DOT race slicks.

:duh:

I could answer this question for myself using nothing but the 1010 tires tire size calculator and spending 10 mins on tire rack and DTD's websites...

[GunmetalSR]

Might want to try silviav8forums.com (I'm on there) or ls1tech.comill be joining today

Damn son you gots lots of monies to throw around if you're buying a $15,000 motor (That doesn't come with a harness or PDM no less).... for an s-chassis, lol

But in a serious note. I have wondered the the same thing.
CCW actually makes all their rims up to 16'' in width I believe.
well i didnt buy a crate motor i actually put it together peice by peice but yea thats all i really wanted to know was do they even make a tire and yea all wheels are made in up to 16 in wide
How fucking stupid are people here???

16" is the width of the rim.

Tire section width is measured in millimeters.

Convert 16" to millimeters then you have the section width tire that you are looking for.

You are not going to find anything though so you are going to have to find the "best" fit.

You'll likely still not find anything close enough in street tires though and will have to use non-DOT race slicks.

:duh:

I could answer this question for myself using nothing but the 1010 tires tire size calculator and spending 10 mins on tire rack and DTD's websites...no shit ill be looking for around a 400 series tire but ive never seen one...the whole point was to see if anyone knew who makes one and how much would it cost or do u need a custom tire and how much would that cost...to make it easier for tire choices i not goin over a 14 inch wide wheel but like i said i was curious
FUCK why is everyone,except for a cool few, bein dicks i mean it was a simple question and u either know it or dont and if u dont then shut up but i do thank u anyways for ur input and its much appreciated:jerkit:

[atutt]

^PM more about your 427 :D
I have a 293 and a 366 myself... Just not in the car yet.

[90white240]

Do you have any Pics of your motor? J/C

[GunmetalSR]

Do you have any Pics of your motor? J/C
lol i do on my home computer but i jus got kicked out...the car is far from finished but i do hav the motor sitting on an engine stand so ill see if i can get over there tonight to get a picture of it

[GunmetalSR]

better yet ill throw u a teaser jus bc of the fact that i was waiting to actually finish the build to start making a build thread...its taken me a long while to get where i am now so i didnt want to make a thread and hav a descent update once a month lol

[s14_sr20_silvia]

would i be using an sr...hell no i made this name when i was 16 and a jdm fan boy


Join Date: Mar 2008...

I'm not a mathematician, but this makes the OP... 18 or 19 now? Dropping an LS7 into an s-chassis...

When did Nick Hogan even get into s-chassis???

[GunmetalSR]

Join Date: Mar 2008...

I'm not a mathematician, but this makes the OP... 18 or 19 now? Dropping an LS7 into an s-chassis...

When did Nick Hogan even get into s-chassis???
correct sir im 18 turnin 19 in july but this is a project ive been workin on for over a year with my dad but beings u brought up my age i guess ima hav to act my age and get a bomex body kit with a million pointless stickers...but yea in all honesty i was a lil jdm fan boy and all about the sr when i first joined then all about ka-t then started thinkin go big or go home and ended up starting this build with my dad

[racepar1]

no shit ill be looking for around a 400 series tire but ive never seen one...the whole point was to see if anyone knew who makes one and how much would it cost or do u need a custom tire and how much would that cost...to make it easier for tire choices i not goin over a 14 inch wide wheel but like i said i was curious
FUCK why is everyone,except for a cool few, bein dicks i mean it was a simple question and u either know it or dont and if u dont then shut up but i do thank u anyways for ur input and its much appreciated:jerkit:

If you know what you are looking for then why don't you go look for your damned self instead of asking others to hand you your answer on a silver platter??? Wasting others time is highly frowned upon here, get used to the results if you wish to continue posting dumbass lazy shit...

[s13dan]

The kind of tires without tread and that must be returned to the manufacturer after use.

[GunmetalSR]

If you know what you are looking for then why don't you go look for your damned self instead of asking others to hand you your answer on a silver platter??? Wasting others time is highly frowned upon here, get used to the results if you wish to continue posting dumbass lazy shit...ahhh ur such a smart ass...i did say that i know its a 400 series tire but i have looked and havnt found shit so i came to zilvia and yes i was sure i was gunna get flamed but dam

[GunmetalSR]

The kind of tires without tread and that must be returned to the manufacturer after use.
hahaha i think i got the jist of that

[brndck]

so why would you post on a nissan site instead of, oh i dunno, contacting some tire companies???

[QuickSpoolSR]

becuase he doesnt have an ls7 or any intention of getting 18x16 wheels. I call bullshit. just being 18 and dumb

[FaLKoN240]

33 posts in we got nothing but a dipshit OP talking about how he's all money no brains.

And a bunch of angry people posting in this fuck fest.

Why isn't this locked? REPORTED.

[S14DB]

becuase he doesnt have an ls7 or any intention of getting 18x16 wheels. I call bullshit. just being 18 and dumb

Why did you have to bump this thread 20days later? Couldn't let it die, just had to get your dig in...

:lockd: