Turbo coolant line kit

[95_sr20det_240sx]

ISIS($119)=== *ISIS SR20DET Turbo Lines - Top and Bottom Mount [ IS-T25-NS1X ] - Enjuku Racing - Performance Parts and High Quality Fabrication (http://www.enjukuracing.com/isis-sr20det-turbo-lines-bottom-mount-p-8612.html?osCsid=qce6l8q4glejstoic4efi632i0)

DIF($128)==== DIF 10035 Bottom Mount Turbo Coolant & Oil Lines Kit S14 SR20DET (OE) (http://www.frsport.com/DIF-10035-Bottom-Mount-Turbo-Coolant---Oil-Lines-Kit-S14-SR20DET--OE-_p_15428.html)


Circuit sports($129)=== Circuit Sports SR20DET Turbo Lines - Top and Bottom Mount [ T25-NSxx ] - Enjuku Racing - Performance Parts and High Quality Fabrication (http://www.enjukuracing.com/circuit-sports-sr20det-turbo-lines-bottom-mount-p-6679.html?osCsid=qce6l8q4glejstoic4efi632i0)




Which one is better?

[luvsr20]

EARLS FTW Taka Motorsports S13 SR Turbo Lines (http://www.240sxmotoring.com/tamos13srtul.html)

[slider2828]

^^ Agreed with a restrictor!

[95_sr20det_240sx]

Thanks for got about that place lol

[DJPimpFlex]

I just purchased these...

DIF 10047 Bottom Mount Forged Turbo Coolant/Oil Lines Kit S13 SR20DET (http://www.frsport.com/DIF-10047-Bottom-Mount-Forged-Turbo-Coolant-Oil-Lines-Kit-S13-SR20DET_p_15434.html)

More expensive, but I was looking for a line set with both sets of restrictors, for stock T25 and for ball bearing turbos for when I upgrade. Well see how it works out, I'm installing them tomorrow.

[fliprayzin240sx]

I dont like the ISIS one, its not steel braided and the weaving actually slightly melted on mine. Its a cheap alternative tho, just make sure you wrap it where it may be too close to a manifold.

PS: The swivel heads suck too...I installed them, took them off a couple of times, then they started leaking. I had to change one from an AN fitting into a nipple connection.

[element2301]

So I take it my diagnosis was correct. My PS rack was all wet and the tranny was all wet exactly like your so i figured thats what it was, prolly even cracked at the same spot. Like i said in your other thread i got the circuit sports ones since the s14 sr20det has an oil restrictor built into the banjo bolt on the oil line that connects to the block. fitment and quality of the lines was great and they look good in the engine bay as well, dresses it up nice.

[!Zar!]

I just picked up the DIF ones from Frsportcom.