PDA

View Full Version : looking for s13 wiring diagram for swap


sr20d's2k
05-26-2010, 09:05 AM
Im putting an redtop sr20det into an s2000 and im looking for a wiring harness diagram that will tell me everything i will need to connect to the body harness. ive used the search bar for an hour and this is what ive resorted to. thanks. the more info the better.

palmdale_mob
05-26-2010, 09:39 AM
Would this help?

http://www.plxdevices.com/ECUDatabase/Nissan/Nissan_SilviaS13SR20DET__91_93_180SXSR20DET_91_95. pdf

jspaeth
05-26-2010, 09:48 AM
http://zilvia.net/f/engine-tech/293028-ultimate-s13-sr-wiring-guide.html

That should help significantly.

sr20d's2k
05-27-2010, 09:05 AM
thank you for all your help guys.

sr20d's2k
05-28-2010, 07:58 AM
anyone have anything else?

g6civcx
05-28-2010, 08:29 AM
Did you read this? http://zilvia.net/f/engine-tech/293028-ultimate-s13-sr-wiring-guide.html#post3164042

DALAZ_68
05-28-2010, 11:30 AM
pretty much everything nissan wise has been laid out...now u need to go to the honda side of things and cross reference there wiring and what wires do what etc etc...

sr20d's2k
06-04-2010, 12:00 PM
i used my factory s2000 manual and a nice s13-s14 sr swap guide. wasnt too difficult, its not far off the s13-s14 sr swap.

DALAZ_68
06-04-2010, 12:33 PM
yeah, its not hard at all...just gotta cross reference which wire does what on both ends, match em (mark em for future reference)......just make sure u do the wiring clean and right...