s14 maf question

[tinys s14]

My sr dosent rev past 2300 rpm and I belive its the maf. I have a zenki s14 sr and the maf plug was miissing on the harness so the engine depot gave me a kouki maf with a oval plug.. Do I need the square plug and a zenki maf or could I plug a zenki maf into the oval plug?
My ECU is a red WC 2371069F00 A18-000 G70

[tinys s14]

anyone????

[JDM Sil4ty]

step 1: is your maf even plugged in? ..
step 2: see if you can see if the plugs match up.
step 3: "if it dont fit you musta quit !" -oj himself

[wvustud2003]

you can run the wires directly to each connector inside the maf to hold you over till you find a plug. takes 5 minutes

[0wn3r]

A zenki SR MAF is not compatible with an kouki SR. So I am guessing it's the same vice versa unless the WC works magic, or you can make it work magic.

What is the serial number on the MAF? That will tell you if it's the right one or not. If it's not the right one, I wouldn't even bother trying to wire it.