S15 yoke.....HELP...

[napz510]

I bought a S15 motor and tranny but doesn't have the yoke that goes to the tranny for the driveshaft. And I tried the s13 yoke won't fit. Where can I get that YOKE???? thanks in advance.....

[brndck]

plz clearly define "yoke".
i'm not sure what you're referring to.
it sounds like you mean the splined shaft that slips into the back of the trans, but i'm not sure.

[napz510]

plz clearly define "yoke".
i'm not sure what you're referring to.
it sounds like you mean the splined shaft that slips into the back of the trans, but i'm not sure.


Yeah that's the one ..thanks for make it clear.

[VAs13]

^im guessing the same thing.

you will need an s15 one. when i went from 5spd to 6spd in my s15 i had to get the 6spd driveshaft. luckily i found one on ebay, which is where you might want to look.

[napz510]

^im guessing the same thing.

you will need an s15 one. when i went from 5spd to 6spd in my s15 i had to get the 6spd driveshaft. luckily i found one on ebay, which is where you might want to look.


So I have to look for the 6 spd driveshaft...ok I'll try ebay then...thanks

[garagelu]

easiest way is to just buy a aluminum aftermarket one. The Driveshaft Shop sell them. You'll spend weeks trying to find a s15 oem driveshaft.

[negrosx13]

http://www.driveshaftshop.com/pdetail.php?pid=266

your welcome ^_^

[napz510]

Thanks guys...there's a driveshaft shop close by me, i'll ask them...thanks again.

[VAs13]

i Just fitted a 6 speed to my 180sx, i had to change the flywheel, as the s15 one is much thicker(and uses longer bolts)
Clutch stayed the same, eventhough people said it wouldnt work.
6 speed gearbox crossmember,
and used a s13 automatic propshaft as the splined end is different.

There was also issues with getting the speedo working etc, but that wouldnt really matter in a drift car.:thumbs:


^^^^just pulled that off of Home | S15 Owners Club (http://www.s15oc.com)