PDA

View Full Version : 02 sensor problems plz help


xs13x
05-16-2010, 12:21 PM
ok so i have a red top sr20det and i bought a cheap aftermarket turbo elbow that has the large 02 sensor port and i bought a new 300zx 02 sensor that i thought was going to fit, but it didnt its just another skinny type soo i wanted to see if anyone knows of a adapter i could buy to make the port from fat to skinny..plz help

SUPERSTAR
05-16-2010, 12:45 PM
There is a threaded adapter you can buy at most hardware stores. I found one at Lowe's. Not sure if you have those in Washington.

xs13x
05-16-2010, 01:21 PM
There is a threaded adapter you can buy at most hardware stores. I found one at Lowe's. Not sure if you have those in Washington.
wow ok well i guess ill go down to lowes and check em out thx man

usajdm
05-16-2010, 01:34 PM
Yeah,just a brass fitting reducer will work.
Most any hardware or plumbing supply should have what you need.
http://img18.imageshack.us/img18/88/brassbushes.png (http://img18.imageshack.us/i/brassbushes.png/)
Uploaded with ImageShack.us (http://imageshack.us)

xs13x
05-16-2010, 02:17 PM
Yeah,just a brass fitting reducer will work.
Most any hardware or plumbing supply should have what you need.
http://img18.imageshack.us/img18/88/brassbushes.png (http://img18.imageshack.us/i/brassbushes.png/)
Uploaded with ImageShack.us (http://imageshack.us)
awesome thx for the replies