Power Windows Pinout

[theronin]

I am bored on my day off and was wondering if it would be at all possible to simply just cut the wire from the auto window and splice it into the power for the passenger side... that way when you auto downed the driver the passenger would go down automatically too! does this sound at all feasible? if so can someone provide me with a wire schematic so i can go about doing this? thanks in advance!

[KSee777]

I actually wouldn't recomend it. Most of the time, the side windows do not roll down or up at the same rate. Not sure about S14 but S13 windows are cable driven. If the passenger window rolls down faster, that means when it goes all the way down, the cable keeps pulling until the driver side window stops. My side window broke b/c when I rolled it down, I kept the button depressed and the cable snapped. BUT it could be vis versa OR the windows roll at the same rate. Test to see if your window roll at the same rate.

[cdlong]

that's a good idea. i was actually thinking of somehow making the passenger switch auto down seperatly. either way would probably work.

about the cables snapping, i doubt it would happen because the switch is supposed to kick out when it gets too much resistance or something like that. even if it did, the driver's window would probably go all the way down first because you have to push it a little bit to get the auto down to click in.