NewfoundlandDude
04-16-2010, 03:17 PM
I've accumulated a bunch of parts over the winter throughout my build, lets use this thread to swap/buy/sell some parts!
I won't be using this stuff, so I'd like to sell or swap.
I might not get any hits, but it'll be on a couple of forums, lets see what you have.
What I want (I'll trade for these parts):
- Z32 front brakes with SS braided conversion lines
- Only interested in Hawk HP+ pads for these
- Z32 15/16" BMC
- 17" race tires maybe (V710, A6, C71 Hankooks) - 245 or wider
- Cash
- Other interesting trades
What I have (Copied from my various threads):
Godspeed Adjustable RLCA
Not going to be using the rears right now.
They're the top ones in the pic, brand new in box.
http://lh3.ggpht.com/_bPcbild_wyQ/S1jTdBye0DI/AAAAAAAAA6E/Z2HOP0GTI_I/100_0347.JPG
Methanol Injection Kit
I bought this over the winter and never installed it.
The guy said a local guy (In Nova Scotia) makes them and sells them.
It uses a Shurflo pump (recommends 50/50 mix), and the parts shown below.
This was a "BNIB" buy, I haven't had time to look into the install.
http://lh6.ggpht.com/_bPcbild_wyQ/S8jJafgAUKI/AAAAAAAACW8/iGue1HVfBAA/s640/Methanol%20Injection%20Kit.jpg
Tanabe Sustec " Drift braces"
The front braces your tension rod brackets from frame rail to frame rail.
The rear braces your sub frame to the chassis on both sides.
Looking for $250 shipped.
http://www.tanabe-usa.com/other/files/23_img1.jpg
http://www.tanabe-usa.com/other/files/79_img1.jpg
Sorry I didn't specify, the rears are for an S14, the fronts fit both S13 and S14.
Real Pics:
http://lh6.ggpht.com/_bPcbild_wyQ/S7JCdLTDRDI/AAAAAAAACGs/wZZoAhQUxJc/100_1019.JPG
http://lh5.ggpht.com/_bPcbild_wyQ/S7JCd03Hx0I/AAAAAAAACHY/BUPZYg_eLOs/100_1020.JPG
http://lh4.ggpht.com/_bPcbild_wyQ/S7JCepdPEtI/AAAAAAAACG4/VFI-t4kco9A/100_1022.JPG
http://lh6.ggpht.com/_bPcbild_wyQ/S7JCfC5fQ5I/AAAAAAAACHg/TjVXtbxiIGs/100_1023.JPG
Got a request in another thread for installed pics:
They bolt near the back of the transmission tunnel, and then at the front-rear subframe cups.
They wouldn't require removal of the subframe or anything like that.
http://lh3.ggpht.com/_bPcbild_wyQ/S7JI8fnbPTI/AAAAAAAACJo/N3crt15Akb4/IMG_1917.jpg
http://lh6.ggpht.com/_bPcbild_wyQ/S7JI8VsCmEI/AAAAAAAACJk/pSweYCM1wMA/IMG_1922.jpg
http://lh5.ggpht.com/_bPcbild_wyQ/S7JJMVJ1C9I/AAAAAAAACKE/_VeSSH5gIBU/IMG_1925.jpg
GTSpec Turbo Elbow
I took this from my GT2871R turbo, so it will bolt up to any t25/28 turbo. For an SR20Det.
Welcome | www.gtspec.com (http://www.gtspec.com/index.php?nav=products_category&pid=171&cat=111)
MSRP: $199 USD
Asking $130 CAD
http://www.gtspec.com/images/s14-turbooutlet.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0339.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0340.jpg
Autometer Cobalt Transmission Temperature Gauge
Brand new in box.
I bought this new, and never used it. It's been opened to inspect, but never left my house or the box.
Auto Meter (http://www.autometer.com/cat_gaugedetail.aspx?gid=3434&sid=4)
MSRP: $70 USD
Asking: $50 CAD
http://www.autometer.com/img/products/6149_d.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0333.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0334.jpg
Brembo GT 13" 4 Piston BBK
Lets reserve this for the "Ballers".
MSRP on this kit is about 3K.
I'll accept 2K. (Cash + Trades)
I know I'm not going to get any bites for this, but why not list it.
If you've got some interesting trades it could work.
Includes the kit + upgraded Endless Blue "M" Pads (also Brembo pads)
Brembo Gran Turismo front big brake system for a 5-lug 240SX.
Specs:
GT 4-Piston calipers (F50-Type) - Red
Drilled 2-piece vented 332x32mm rotors (13" rotors)
HP1000 pads
Braided lines
Kit 1B1.7012A in this table I made up to show the similarities to the 300Zx and 350Z kits.
http://lh6.ggpht.com/_bPcbild_wyQ/S7KkiOWDbsI/AAAAAAAACLY/YAUbSEi5Ef4/s912/Brembo.jpg
This type:
http://www.tirerack.com/images/brakes/brembo/gt_styles/style_3.jpg
Here's some additional info on the kit. (Style 3C)
Brembo Gran Turismo Brake Systems (http://www.tirerack.com/brakes/brembo/gran_turismo.jsp)
Brembo GT Site - Insert Nissan 240SX
http://www.brembo.com/CatalogoHPGT/Templates/SearchHPGT.aspx?NRMODE=Published&NRNODEGUID={0DECE949-F261-4E29-A729-C4A049DD61FE}&NRORIGINALURL=%2fUS%2fPerformance%2fGranturismoCat alogue%2f&NRCACHEHINT=NoModifyGuest
Lets see what you have.
These are some good parts, lets trade some stuff.
I won't be using this stuff, so I'd like to sell or swap.
I might not get any hits, but it'll be on a couple of forums, lets see what you have.
What I want (I'll trade for these parts):
- Z32 front brakes with SS braided conversion lines
- Only interested in Hawk HP+ pads for these
- Z32 15/16" BMC
- 17" race tires maybe (V710, A6, C71 Hankooks) - 245 or wider
- Cash
- Other interesting trades
What I have (Copied from my various threads):
Godspeed Adjustable RLCA
Not going to be using the rears right now.
They're the top ones in the pic, brand new in box.
http://lh3.ggpht.com/_bPcbild_wyQ/S1jTdBye0DI/AAAAAAAAA6E/Z2HOP0GTI_I/100_0347.JPG
Methanol Injection Kit
I bought this over the winter and never installed it.
The guy said a local guy (In Nova Scotia) makes them and sells them.
It uses a Shurflo pump (recommends 50/50 mix), and the parts shown below.
This was a "BNIB" buy, I haven't had time to look into the install.
http://lh6.ggpht.com/_bPcbild_wyQ/S8jJafgAUKI/AAAAAAAACW8/iGue1HVfBAA/s640/Methanol%20Injection%20Kit.jpg
Tanabe Sustec " Drift braces"
The front braces your tension rod brackets from frame rail to frame rail.
The rear braces your sub frame to the chassis on both sides.
Looking for $250 shipped.
http://www.tanabe-usa.com/other/files/23_img1.jpg
http://www.tanabe-usa.com/other/files/79_img1.jpg
Sorry I didn't specify, the rears are for an S14, the fronts fit both S13 and S14.
Real Pics:
http://lh6.ggpht.com/_bPcbild_wyQ/S7JCdLTDRDI/AAAAAAAACGs/wZZoAhQUxJc/100_1019.JPG
http://lh5.ggpht.com/_bPcbild_wyQ/S7JCd03Hx0I/AAAAAAAACHY/BUPZYg_eLOs/100_1020.JPG
http://lh4.ggpht.com/_bPcbild_wyQ/S7JCepdPEtI/AAAAAAAACG4/VFI-t4kco9A/100_1022.JPG
http://lh6.ggpht.com/_bPcbild_wyQ/S7JCfC5fQ5I/AAAAAAAACHg/TjVXtbxiIGs/100_1023.JPG
Got a request in another thread for installed pics:
They bolt near the back of the transmission tunnel, and then at the front-rear subframe cups.
They wouldn't require removal of the subframe or anything like that.
http://lh3.ggpht.com/_bPcbild_wyQ/S7JI8fnbPTI/AAAAAAAACJo/N3crt15Akb4/IMG_1917.jpg
http://lh6.ggpht.com/_bPcbild_wyQ/S7JI8VsCmEI/AAAAAAAACJk/pSweYCM1wMA/IMG_1922.jpg
http://lh5.ggpht.com/_bPcbild_wyQ/S7JJMVJ1C9I/AAAAAAAACKE/_VeSSH5gIBU/IMG_1925.jpg
GTSpec Turbo Elbow
I took this from my GT2871R turbo, so it will bolt up to any t25/28 turbo. For an SR20Det.
Welcome | www.gtspec.com (http://www.gtspec.com/index.php?nav=products_category&pid=171&cat=111)
MSRP: $199 USD
Asking $130 CAD
http://www.gtspec.com/images/s14-turbooutlet.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0339.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0340.jpg
Autometer Cobalt Transmission Temperature Gauge
Brand new in box.
I bought this new, and never used it. It's been opened to inspect, but never left my house or the box.
Auto Meter (http://www.autometer.com/cat_gaugedetail.aspx?gid=3434&sid=4)
MSRP: $70 USD
Asking: $50 CAD
http://www.autometer.com/img/products/6149_d.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0333.jpg
http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0334.jpg
Brembo GT 13" 4 Piston BBK
Lets reserve this for the "Ballers".
MSRP on this kit is about 3K.
I'll accept 2K. (Cash + Trades)
I know I'm not going to get any bites for this, but why not list it.
If you've got some interesting trades it could work.
Includes the kit + upgraded Endless Blue "M" Pads (also Brembo pads)
Brembo Gran Turismo front big brake system for a 5-lug 240SX.
Specs:
GT 4-Piston calipers (F50-Type) - Red
Drilled 2-piece vented 332x32mm rotors (13" rotors)
HP1000 pads
Braided lines
Kit 1B1.7012A in this table I made up to show the similarities to the 300Zx and 350Z kits.
http://lh6.ggpht.com/_bPcbild_wyQ/S7KkiOWDbsI/AAAAAAAACLY/YAUbSEi5Ef4/s912/Brembo.jpg
This type:
http://www.tirerack.com/images/brakes/brembo/gt_styles/style_3.jpg
Here's some additional info on the kit. (Style 3C)
Brembo Gran Turismo Brake Systems (http://www.tirerack.com/brakes/brembo/gran_turismo.jsp)
Brembo GT Site - Insert Nissan 240SX
http://www.brembo.com/CatalogoHPGT/Templates/SearchHPGT.aspx?NRMODE=Published&NRNODEGUID={0DECE949-F261-4E29-A729-C4A049DD61FE}&NRORIGINALURL=%2fUS%2fPerformance%2fGranturismoCat alogue%2f&NRCACHEHINT=NoModifyGuest
Lets see what you have.
These are some good parts, lets trade some stuff.