PDA

View Full Version : TX Cheap: Fully Built RB25DET Complete Swap


drift_student
03-30-2010, 12:28 PM
Fully Built Nissan Skyline RB25det Motor Set
Motor has 2000 miles since build
Motor runs Perfectly
No Smoke at all Perfect compression and idle
Good to hold 800 hp

This is a complete swap for nissan 240sx 89-94 s13, for s14 adjust wiring and driveshaft length.

Parts list with price breakdown:
-Complete Rb25det harness wired for s13 $500
-RB25det Motor $1400
-RB25det Tranny $1000
-McKinney Motor Mount set $400
-McKinney Tranny Mount $100
-McKinney Driveshaft for S13 $400
-JDM RB25det Instrument Cluster with Pig Tails $100
-Custom 3" Downpipe $300
-Top Speed Turbo Manifold $200
-OBX Intake Manifold $300
-Precision PT6765 Billet Turbo Good for 850hp $1100
-Triple Core Aluminum Radiator $300
-Silicone Radiator Hoses $100
-CP Pistons Stock Bore $800
-Eagle Connecting Rods $700
-ARP headbolts $100
-Cometic Headgasket $100
-Tomei Poncams 256 $800
-Clutch Masters Stage 5 Clutch $400
-12 pound Flywheel $200
-Q45 Throttle Body 90mm $100
-Nissan Quest Alternator $100
-Nismo 555 Injector set $800
-Z32 Maf $100
-Jim Wolf Technology ECU perfect maps $700
-Power Steering
-Igniter Chip
-Tial 38mm Wastegate

All These parts work perfectly with each other, I paid $11,100 for these parts. Most of these part are less than a year old.

All parts are in my S13 and running so the buyer can go for a test ride. I can take it all out in a day.

http://img31.imageshack.us/img31/6127/rb25det.jpg (http://img31.imageshack.us/i/rb25det.jpg/)

I will let this set up go for $7,500 OBO!!! Not parting out at this time!!!

Everything is located in TX. Shipping is extra.

Please contact by email: [email protected]

Thanks for looking! Please bump!

matbmorr
03-30-2010, 01:59 PM
Holy hell that's a nice price...I wish i had it...Gl man

AS240
03-30-2010, 06:53 PM
on standby if you part.
*bumpity

drift_student
04-02-2010, 12:34 PM
Price drop to $7000 OBO.

Anyone who knows anything about the cost of building a motor and can add should realize how great of a deal this is.

It is a 100% complete swap.

The engine internals and turbo have less than 2500 miles on them since new.

I'm also willing to negotiate on shipping a little.

Still not parting out yet, but thanks for the interest.

herbieS13
04-02-2010, 12:51 PM
nice price free bump someone buy this +1 for someone else from tx

drift_student
04-07-2010, 02:11 PM
I need the space and funds for another project.

Price drop to $6000 FIRM!
Price drop to $6000 FIRM!
Price drop to $6000 FIRM!
Price drop to $6000 FIRM!

Good luck getting this kind of potential and power output from an SR swap for this price!

Email me and let's work something out! [email protected]

1GayDrifter
04-07-2010, 03:46 PM
the seller posts on houston240sx.com, i can vouch

awesome RB25, i DID NOT know you were among the few the owned and drove one from the forums. RB25s are amazing cause you have the power of a straight six and a turbo to back it up. nothing like an sr. to whoever buys this, all you need is an adjustable harmonic balancer and this motor will be good to up to 1000 rwhp or a little more.

glws man my RB strives to be like this

ross.cottrill
04-07-2010, 06:07 PM
do you have a dyno for me to look at?

NYS13SLIDER
04-07-2010, 06:15 PM
Id like to see a dyno as well. And how much do you think shipping would be to N.Y? Nice turbo by the way,i run the same size Precision on my s2000.

drift_student
04-08-2010, 12:21 PM
I actually started pulling the engine late last night and will finish today. The harness is clearly labeled for the easiest installation ever. Everything on the R33 cluster will work in an S13.

The chassis it is about to be off to bigger and better things.

The engine was never officially put on a dyno (since it was in a drift car), but I estimate it puts out a minimum of 500 whp.(This is an extremely modest estimate.)

I will ship anywhere in the Continental US for an additional $500.
I will ship anywhere in the Continental US for an additional $500.
I will ship anywhere in the Continental US for an additional $500.
I will ship anywhere in the Continental US for an additional $500.

Everything should fit on a large pallet, or if necessary, two smaller pallets.

Most importantly, EMAIL ME with questions, comments, or concerns!!!

[email protected]

drift_student
04-20-2010, 08:21 AM
All emails and PMs have been replied to. Seriously, its only $6500 shipped for a running, complete swap! This is your chance to go fast for cheap!

240sx...YAY!
04-20-2010, 12:29 PM
hahah damnit i wish i had a few thousand more hah

i guess im stuck with an SR for now

Slammed Assassin
04-20-2010, 12:34 PM
I want this so bad wait a couple months. Lol

sincity_sil80
04-20-2010, 11:32 PM
nice setup, and an unbeatable price.. i would so swoop this if i had the funds.. may the best of luck be with you on this sale!!

RB24_S14
04-20-2010, 11:40 PM
Goddamn. NICE! GLWS

mxsx25
04-20-2010, 11:43 PM
is this stil available? pm me and we'll talk

drftem
04-21-2010, 12:35 AM
Let me know if this is still available. Im helping my cousin find an rb25 swap. He has cash.

mxsx25
04-21-2010, 12:36 AM
i also have cashhhhh

undercoverdjay
04-26-2010, 10:59 PM
Damn, Id swap my 98 kouki 5 speed for this setup haha.

jambadre
04-27-2010, 12:47 AM
Oh man if i had the money i would pick it up in a heart beat, pretty much my dream setup :cry:

Slidin' Sam
04-27-2010, 06:16 AM
the injectors and cams seem a bit mild for that turbo. Do you have dyno sheets? What boost levels were you running this at? NOTE: I am not a potential buyer, but I am sure that a potential buyer would want to know this information. Nice set-up though, looks real clean!

S14Driftn4life
10-07-2010, 03:50 AM
Im pricing out the swap as we speak. Im doing it this winter just waiting for the snow. If deal still stands come December 1st im a sure thing. Please keep me posted. Il do the same with you.

Jmsklmn
10-07-2010, 05:50 AM
Wish i would have seen this before I started my ls1 swap! Gl selling, great price!

racerx2k1
10-07-2010, 08:54 AM
Last Activity: 08-26-2010 12:06 AM