HELP CD Player is on but no sound!

[AznB_Boy89]

Like the title says. My pioneer CD player is showing that its working and playing but im not getting any sound from my speakers. Now before you say i probably wired the cd player up wrong, this CD player has been working for atleast a year and then the other day I had it paused for a minute then un-paused it to find out there was no sound anymore. I've checked most fuses but i've heard theres 2 ACC relays and i think i only checked one.. If someone could tell me where both these ACC relays are located that'd be great that way i can figure out which one i already checked. or if you have any other suggestions to what the problem could be thatd be great too. Thanks ahead of time!

Tony

[projectRDM]

If both constant and ignition feeds have power and the unit is on, there is no relay or fuse to check unless you're still using the OE amplifiers, there's one fuse on the rear amp. However that would not keep the fronts from working, and most people bypass them anyway. The radio itself may have a fuse but that does not protect the amplifier section, only the power supply, so if any fuse was blown the deck wouldn't turn on.

More likely the amplifier is grounded out due to a shorted speaker wire or voice coil. Try unplugging speakers one at a time and see if comes back on, if that isn't the case, the deck might just be on it's way out.