PDA

View Full Version : Pulling stock side feed injectors.


SMM
03-19-2010, 09:21 PM
I cannot get these stock ka24de injectors out.

Any tricks/tips?

They are being a real pain in the ass never had this trouble before.

j20accord00
03-19-2010, 10:10 PM
after you took the caps off can you turn the injectors around while still seated?

a pair of vise grips usually do it for me. if that doesnt work then you can use 2 flat heads and put them in the side of the injector where the grooves are to pry them out

SMM
03-19-2010, 11:41 PM
Tried that along time ago, broke injectors doing that. Yes they spin.

wh0aitznic0
03-19-2010, 11:56 PM
I personally use the combination of flathead using the valve cover as a pivot point and vice grips around the circle part. Simple. Pull in bursts and twist while pulling. Should come out fairly easy.

Oh yeah, use your palm + an 8 point deep socket to push the new ones in and also, put some Vaseline petroleum jelly on the upper O rings when you put your new ones in. Make life MUCH easier.