FS: Precision GT35r T4 .68ar - CHEAP

[3bar_dc2]

I'm selling my Precision T4/GT35R .68ar turbo. I bought this used. The tip of the exhaust blades are bent but I'm told it still works fine. I've also read on other forums of people running them this way with no problems. No signs of any leaking seals and very minimal shaft play. The compressor housing is polished. The turbo outlet is cut and I'm including a elbow with it so you can have it welded up for whichever way you need (since fmic piping setup may be different from car to car).

Turbo is being sold as is. It's still bolted up to the car so these are the only pics I could get.

$575 shipped or $500 shipped without the T4 .68ar exhaust housing (in case someone is wanting a t3 housing)

http://i304.photobucket.com/albums/nn198/3bar_dc2/2009-12-02151019.jpg

http://i304.photobucket.com/albums/nn198/3bar_dc2/frontofturbo-1.jpg


Thanks
Sean

[3bar_dc2]

Bump turbo is now off the car. I was told the tips of the exhaust wheel being bent/jagged are from a foreign object going through the exhaust. There is very minimal shaft play and no other markings at all.

I sent an email to Precision asking how much it would be to repair the turbo in the event someone wanted to.

Here is his response

Sean,
It is not very likely that your turbine wheel melted do to high egt's. It sounds like you had some type of foreign object go through your exhaust. In order to fix it you are looking at around $330. That is to just for the Turbine wheel and labor. If there are any other issues with the turbo the price can go up.
Thanks,

Wes Born
Precision Turbo Service Technician (http://zilvia.net/f/#)
(219) 996-7832


Judging from the evo guys' experience, I was going to run it as is.
http://forums.evolutionm.net/evo-engine-turbo-drivetrain/371833-please-look-pics-35r-bent-turbine-fin-barely-2.html

$575 shipped or $500 shipped without the T4 .68ar exhaust housing (in case someone is wanting a t3 housing)

[3bar_dc2]

Bump#2. I sent an email to Precision asking how much it would be to repair the turbo in the event someone wanted to.

Here is his response

Sean,
It is not very likely that your turbine wheel melted do to high egt's. It sounds like you had some type of foreign object go through your exhaust. In order to fix it you are looking at around $330. That is to just for the Turbine wheel and labor. If there are any other issues with the turbo the price can go up.
Thanks,

Wes Born
Precision Turbo Service Technician (http://zilvia.net/f/sale-items/309306-fs-precision-gt35r-t4-68ar-cheap.html#)
(219) 996-7832


Judging from the evo guys' experience, I was going to run it as is.
Please look at pics. 35r bent turbine fin (barely) - Page 2 - evolutionm.net (http://forums.evolutionm.net/evo-engine-turbo-drivetrain/371833-please-look-pics-35r-bent-turbine-fin-barely-2.html)

Price is OBO and I'm definitely flexible. for under $900 you would have a t4 flanged gt35r with a fresh exhaust wheel and balancing, or run it as is.