Bucket Seats on a Budget - Back again for Round 5!

[Sonic Motor]

This group buy closes on May 15th. AKA TOMORROW!

The most epic seat groupbuy of all time now back on Zilvia for the fifth round!!!

- Our trusted line of full racing bucket seats.
- Each bucket seat is made from Fiberglass Reinforced Plastic (FRP)<--unless its the CF ones
- Wrapped in high quality ALCANTARA & CLOTH FABRIC.


SPECIAL NOTE: There will be 12-16 SLOTS open for the people of Zilvia just like before. When the 12-16 slots have been filled, the group order will be placed and the seats will be manufactured. Once the seats have been manufactured they will ship out. The manufacturing and shipping process usually takes up to 6-10 weeks.

__________________________________________________ ___

How this works:
1. Place your deposit of at least 50% of the total value of the seat or seats (non-logo only).
2. We order the seats, and have them come over in a container from overseas.
3. (Local Customers) Seat comes in stock and you pay for the rest upon pickup.
3. (Non-Local Customers) We send you an invoice and you pay for the rest of the seat(s). The seats will then be shipped out to you.

Certain seats will be available with a "LOGO." All LOGO and full carbon fiber seats will need to be pre-paid in full.

If you have any questions feel free to contact us through PM or on AIM: carparthookup
__________________________________________________ ___
G3 Seat, JGTC Inspired seat.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/G3k106.jpg

MSRP: $1700/seat
AVAILABLE in BLACK ONLY or Red Only with LOGO SERVICE

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our widest seat. Recommended for bigger taller guys!
Width Outer Shoulder Area: 23
Width Bottom, Widest Point: 23
Width Inner Shoulder Area: 12
Width Inner Lumbar Area:
Width Inner Seat Area: 14
Height: 36

__________________________________________________ __
VS3 Seat

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/VS3k109.jpg

Conservative design, just everything you need in a racing seat. Low max system equipped.

AVAILABLE in BLACK or RED
MSRP: $700/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
Logo, CF overlay shell: $520
Logo, Real CF shell: $710

Dimensions: Our skinniest seat.
Width Outer Shoulder Area: 21.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 11
Width Inner Seat Area: 13
Height: 35

__________________________________________________ __
SP2 Seat

http://www.sonicmotor.com/v/vspfiles/photos/S-K103-CLR-2.jpg

A seat inspired by the BTCC. Features excellent lateral grip on the entire body. Fits average sized drivers. Seat is available with either fiberglass or carbon fiber shell. Perfect for driver who is looking for full bucket seat and is not super slim around the waist.

AVAILABLE in BLACK, RED
MSRP: $700/Seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $400
logo, CF overlay shell: $420
logo, Real CF shell: $710

__________________________________________________ __
P2 Seat

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/P2spgK104.jpg

P2 seat, A true motorsport racing shell virtually tailored to the driver's body. Its anatomically shaped frame, and excellent lateral support allow for maximal driver comfort under extreme stress.

AVAILABLE in BLACK or RED
MSRP: $700/Seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $340
No logo, CF overlay shell: $440
No logo, Real CF shell: $630

Logo, FRP shell: $500
logo, CF overlay shell: $600
logo, Real CF shell: $780


Dimensions: Wider than VS3, Skinnier than G3
Width Outer Shoulder Area: 23.5
Width Bottom, Widest Point: 18.5
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 12
Width Inner Seat Area:1 3
Height: 35
__________________________________________________ __
GS Seat, Reclinable Bucket Seat

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/GSK608.jpg

GS seat, the reclining bucket seats. This seat sits super low for a bottom mount seat. Similar to the Bride Low max system. Beautifully upholstered with red stitching.

AVAILABLE in BLACK or RED, and Black with gradation.
MSRP: $1300/seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830


Dimensions:
Width Outer Shoulder Area: 22
Width Bottom, Widest Point: 19
Width Inner Shoulder Area: 11
Width Inner Lumbar Area: 10.5
Width Inner Seat Area: 13
Height: 33
__________________________________________________
CG Seat

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/CGk606.jpg

CG Seats- Introducing the reclineable bucket with FRP/Carbon Kevlar shell/backing. This seat is one of the most popular in Japan, street, drift and time attack. Lightweight but with increased rigidity when compared to the discontinued B2 seats.

AVAILABLE in BLACK or RED or BLUE
MSRP: $800 per seat

Price per PAIR (for single seat, just take off half the price):
No logo, FRP shell: $440
No logo, CF overlay shell: $560
No logo, Real CF shell: $750

Logo, FRP shell: $520
Logo, CF overlay shell: $640
Logo, Real CF shell: $830

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35

__________________________________________________ __

Non bucket seats are available for those of you looking for some with more comfort!
__________________________________________________ __
E2 and DG Seats

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/DGK701-E2K700.jpg

E2 seat and DG seat, introducing reclining seats are created for racing, with daily driveability and comfort in mind.

MSRP: $700/seat

Prices for A PAIR(for single, just take off half the price):
No logo, cloth: $350
No logo, CF overlay shell: $N/A
No logo, Real CF shell: $N/A

Logo, cloth: $490
Logo, CF overlay shell: $N/A
Logo, Real CF shell: $N/A

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 13
Width Inner Lumbar Area: 18
Width Inner Seat Area: 14
Height: 35
__________________________________________________ __
RSS Seat

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/RSSK500.jpg

RSS Seats aka Recaro SRD style seats, Eye-catching design keenly masks its superb comfort features. Underneath its racy looks and sporty styling are all the advanced engineering features and sophisticated technical details a performance-seeking driver could want.

AVAILABLE IN BLACK VINYL, BLACK CLOTH WITH RED STITCHING, OR RED
MSRP: $700/seat

No logo, Black vinyl: $300
No logo, Cloth: $300
No logo, Real CF shell: $N/A

No logo service for these seats.

Dimensions:
Width Outer Shoulder Area: 21
Width Bottom, Widest Point: 21
Width Inner Shoulder Area: 11.5
Width Inner Lumbar Area:
Width Inner Seat Area: 13.5
Height: 35


NOTE:
- All blue and red seats are $20 more for the pair.

- All seats come with universal SLIDERS, but the bracket will need to be purchased separately.

__________________________________________________ __ __

Shipping is available! Shipping one seat will cost the same as a pair because the shipping rate is determined by dimensional weight; not actual weight.

Flat rate shipping for 48 continental states
Business address rate: $125 for US customers.
Residential addresss rate: $150 for US customers.

AK, PR, Hi, Canada, or any other international customers please contact me for a quote.

Payments:
- Local pickup
- Cash (bring cash, tax included)
- Paypal (3% paypal fee will apply for local pickup only)
- Credit card (9.75% CA tax will apply)
- Fill out our form for pre-order, and you are all set!

Out of town people
Paypal email address: [email protected]

HOW TO ORDER:

1. Go to Sonic Motor - Power and Performance (http://www.sonicmotor.com)
2. Find the seat of your choice
3. Choose the seat trims of your choice
4. Add to cart
5. Enter code "nologo" for non-logo seats. (Only pay for half the value of the seat, non-logo ONLY)
6. Enter code "noship" (No need to pay for shipping until the seats arrive)

After that, your order is complete and you will be added to the group buy. Email or PM me after you have placed the order to confirm that you are on the group buy. Please also email or PM if you encounter any problems during checkout. Thanks.

If you have any questions or concerns, please PM or post.

Our Address:
315 Cloverleaf DR STE C
Baldwin Park, CA 91706
626-363-9036

Email: [email protected]
Aim: carparthookup
I'm online during regular business hours.

Open Regular Business Hours
Mon-Friday 9am-6pm
Sat. 9am-3pm
Sun. Closed


Cancellation is subject to a 15% restocking fee for non logo seats
Cancellation is subject to a 20%-restocking fee for seats with Logos.
_____________________________________________

Want to "test sit" a seat before purchasing? Come to our shop and take a seat in the seat you are intersted in. We have every single seat for you to "test sit."

Thank you everyone for your support!!!

Group Buy Round List of Paid
1. Josh Bunnell
2. Florante Rea
3. Andrew's Friend
4. Nilayam Patel
5. Peter Kim
6. Martin Sarukhanyan
7. Mario Montoya
8. Emmanuel Adamopoulos
9. David Nong
10. Matthew Ring
11. Werner Castillo / Enrique
12. Daniel An
13. Howard Chen
14. Alexander Hsieh

If you ordered a seat and don't see your name on the list please call or email me!

This group buy closes on May 15th. AKA TOMORROW!

[thelrgkid]

I was looking at the dg seats but if it comes with the logo what would the logo be?

[murda-c]

God i wish i could test sit one of those recliners.

Prolly to small anyway.

[mehsilvia]

God i wish i could test sit one of those recliners.

Prolly to small anyway.

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.

[Sonic Motor]

I was looking at the dg seats but if it comes with the logo what would the logo be?

PM me for details.

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.

I didn't know you were such a big fan of our seats Chris? haha. But yes, they are awesome seats.

All PM's replied.

[mehsilvia]

I didn't know you were such a big fan of our seats Chris? haha. But yes, they are awesome seats.

All PM's replied.

Wasnt. Till i sat in one.

[enkei2k]

hmm...i have a torino 2 that i'm looking to get rid of, maybe i can get these instead...if someone would buy it first of course. i wish i jumped in the last GB though. procrastinating sucks.

if i get these with rails, will the rails ship together or separatE?

[NINJASPY]

Any rails that sit lower than the buddy club rails?
I got a vs3 and I love it but I would like to sit a little bit lower, the sliders on the buddy club rails get in the way of the seat being mounted lower.

[alindeman1989]

im 6,1 im between a 34-36 waiste. around 210. what seat would fit me best? full bucket non recline

[JayDee M Rolly]

GS Reclinable. Comfortable as fuck!. I test fitted it at the shop, and now have a set on order in GB #4

And im a big boy. 6.2 250lbs. Fit perfectly. Most comfortable seat ive ever sat in. Have owned Corbeau Forza II, Corbeau A4 Wide, S14, S13-SE, Sparco Torino II - these are by far my favorite! Fantastic lumbar support, adjustability, material - im seriously impressed.
did you sit in the SP2 by any chance? very curious about that seat.

[mehsilvia]

did you sit in the SP2 by any chance? very curious about that seat.

LOL. No i havent.

Perhaps they will pay me to be a SonicMotor Model :boink:

They have them all setup in a show room for you to testdrive yourself. You should stop by the shop and check em out!

[WISH ONE]

God i wish i could test sit one of those recliners.

Prolly to small anyway.

My shoulders/upper torso didnt fit in my GS reclineable at all, :) i had to sell it. Im going to try and get the sp2 next.

[Moon Ill]

Does the GS sit the lowest in the S13 chassis?

[Psycho 240 Freak]

My shoulders/upper torso didnt fit in my GS reclineable at all, :) i had to sell it. Im going to try and get the sp2 next.

How big are you?

[alindeman1989]

im 6'1 ish and around 205-210. between a 34-36 waist. what seat can i fit? bucket non recline

[Sonic Motor]

if i get these with rails, will the rails ship together or separatE?

They will ship together with the seats with no additional cost.

Any rails that sit lower than the buddy club rails?
I got a vs3 and I love it but I would like to sit a little bit lower, the sliders on the buddy club rails get in the way of the seat being mounted lower.

Nagisa, or Bride FG.

im 6,1 im between a 34-36 waiste. around 210. what seat would fit me best? full bucket non recline

I would say the P2 or SP2. I think the SP2 would be more comfortable.

LOL. No i havent.

Perhaps they will pay me to be a SonicMotor Model :boink:

They have them all setup in a show room for you to testdrive yourself. You should stop by the shop and check em out!

haha. You have to make sexy faces while sitting in the seats.

And yes, I have all of them in stock for anyone to try out!

Does the GS sit the lowest in the S13 chassis?

If you want low, you will need to get a side mount seat. OR, you can have the GS welded straight to the mounting bracket. It will be low, but non-adjustable.

[florante rea]

already sent payment for cg seat, thank you.

[slipinslider_s13]

sombody buy 2 red recliners and ill trade you my 180sx seats for them!!!!!

[sidedrifts13]

im 5'7 weigh 178 waiste is 34 what seat would be good

[Moon Ill]

Are any of these side mount?

[Sonic Motor]

im 5'7 weigh 178 waiste is 34 what seat would be good

The P2 would be best for you.

Are any of these side mount?

All the full bucket seats are side mount.

All PM's replied!

[alindeman1989]

do you have dimesions for the sp2?

[Sonic Motor]

do you have dimesions for the sp2?

Just PM'ed them to you. =)

All other PM's replied.

[ernestz300z]

I'm about 5'11 36 waist+ would the GS seat be comfortable

[chaseSR86]

im a fatt ass 5"11' 220lbs can I fit into a P2?

[Sonic Motor]

I'm about 5'11 36 waist+ would the GS seat be comfortable

You can fit, but it will be a very tight fit. The DG and CG seats are wider and the side supports aren't as high.

im a fatt ass 5"11' 220lbs can I fit into a P2?

Same as above. The SP2 seat will be a better fit.

[C2AUTOSPL]

Do u have any RED CG seats laying there at the warehouse?

[Sonic Motor]

Do u have any RED CG seats laying there at the warehouse?

Sorry, don't have any red at the moment. Or any CG's for that matter. I MIGHT have some extra CG's coming in at the end of this month.

[C2AUTOSPL]

I will give you a call sometime next week then.

[Z33dori]

(1)p2 shipped 45801

[S13 Charlie]

I think I'm going to jump in on this round.. 1 plain, black, blank G3. One the website, the price for that shows up in the cart as $180, not the $170 that this thread shows. What's up with that?

[Sonic Motor]

(1)p2 shipped 45801

$271.38 shipped.

I think I'm going to jump in on this round.. 1 plain, black, blank G3. One the website, the price for that shows up in the cart as $180, not the $170 that this thread shows. What's up with that?

That is a mistake. I'll have to change the price on the website. Thank you for bringing this to my attention.

All PM's replied.

[dontxploitme]

is it possible to just go to the shop and pick one up instead of dealing with the pre order and shipping?

[Mazdasped]

I would be all about these but i am would like to know more specs about the p2, who makes it or something along those lines. Just always been alittle nervous about "knock offs" when it comes to safety. thanks

[Perfect Balance]

What kind of safety are you expecting at ~$300 a pair?

[Sonic Motor]

is it possible to just go to the shop and pick one up instead of dealing with the pre order and shipping?

Yes, you can pick them up, but in order to get a seat, you will have to pre-order.

I would be all about these but i am would like to know more specs about the p2, who makes it or something along those lines. Just always been alittle nervous about "knock offs" when it comes to safety. thanks

They are made overseas in a warehouse that sells directly to us. These seats have been proven many times that they will hold up in a crash.

[Mazdasped]

good stuff i think i will take a plunge and put down my money very soon. at these awesome prices i am assuming they dont come with brackets, so how much for 2 brackets for the p2 seat

[sacjdms13]

Logo, FRP shell: $520
Logo, CF overlay shell: $640

count me in but i would like to know prices with shipping, and if i can get black with gradation and red stitching?

[Sonic Motor]

good stuff i think i will take a plunge and put down my money very soon. at these awesome prices i am assuming they dont come with brackets, so how much for 2 brackets for the p2 seat

All the seats come with universal bottom mount sliders. All you need to do is buy mounting brackets. The bottom mount brackets are $100 each. If you want side mount brackets, they will be Buddy Club. Please PM me for pricing.

Logo, FRP shell: $520
Logo, CF overlay shell: $640

count me in but i would like to know prices with shipping, and if i can get black with gradation and red stitching?

For shipping and handling just add $150 more to the cost of the seats.

All PM's replied.

[olender240]

Im new on to the site but i gotta get a set of those DG's. How would i go about doing this. any help is appreciated!

[KoukiMonsta]

what seat fits me? 6'1" 165lbs

reclinable and not?

thanks. !!

[enkei2k]

do you happen to have any GS and VS3 pictures with bottom mounts installed in cars (specifically s14)? i'd like to see how high/low they sit in comparison to my sparco.

[i need tires]

when you include your shipping cost is this cost from overseas to California then to us (customer)?

Because shipping of two seats isnt $150... its closer to $100

[phantomfoot]

money sent for pair of GS seat black no logoFRP shell pick up.

[greddygalant]

Just ordered one GS, black w. red stitching and logo

[Sonic Motor]

Im new on to the site but i gotta get a set of those DG's. How would i go about doing this. any help is appreciated!

PM me and I'll let you know what you need to do!

what seat fits me? 6'1" 165lbs

reclinable and not?

thanks. !!

You should be able to fit in pretty much any of our seats. The P2 would be pretty comfortable for you as well as the GS seat.

do you happen to have any GS and VS3 pictures with bottom mounts installed in cars (specifically s14)? i'd like to see how high/low they sit in comparison to my sparco.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/f461e864.jpg

GS SEAT with bottom mount bracket. No modifications.

when you include your shipping cost is this cost from overseas to California then to us (customer)?

Because shipping of two seats isnt $150... its closer to $100

It includes the shipping cost from overseas and then to you. It also covers the additional packaging that we use as the seats do not come packed very well from the factory.

money sent for pair of GS seat black no logoFRP shell pick up.

Got your payment!

All other PM's replied.

[giodachamp]

Hey I tried to IM you but you wouldn't reply :'( lol. Anyways, how much more if I wanted the Bride Gradience with my seat? I want the VS3 btw. Thanks

[burtoncr]

Sorry to hear about your wheels. I told you in a PM last week that the seats would be here at the end of March.

I know I say this and that, but it's what I am being told. I have no control over the manufacturing process. Everyone just has to be patient. There was a delay due to CHINESE NEW YEAR. I have no control over Chinese holidays either. So, I'm sorry for the delays, the seats will be here the end of March.

-Karl


http://zilvia.net/f/group-buys/286946-bucket-seats-budget-back-due-popular-demand-round-4-a-6.html#post3318729

It's the end of March. What's the news on Group Buy #4 seats?

[Psycho 240 Freak]

Last I heard, it got moved back to mid April.

[s13yaobling]

Last I heard, it got moved back to mid April.

..... yah id like to know a update too thanks.

[Sonic Motor]

Hey I tried to IM you but you wouldn't reply :'( lol. Anyways, how much more if I wanted the Bride Gradience with my seat? I want the VS3 btw. Thanks

$400 for the pair.

http://zilvia.net/f/group-buys/286946-bucket-seats-budget-back-due-popular-demand-round-4-a-6.html#post3318729

It's the end of March. What's the news on Group Buy #4 seats?

Last I heard, it got moved back to mid April.

..... yah id like to know a update too thanks.

Group 4 will be shipped out on the 31st and will be here around the 15th of April. If you have anymore questions about group 4, please PM me.

[mrsuave]

group 5 for me then :)

[Sonic Motor]

group 5 for me then :)

Yuup.

All PM's replied.

[NYS13SLIDER]

Is there still room in group buy 5? If so what seat options do i have that would fit me best, im 5' 9" and about 160lbs.

[Sonic Motor]

Is there still room in group buy 5? If so what seat options do i have that would fit me best, im 5' 9" and about 160lbs.

Yes, there is still room in this group buy. For a person of your stature, you would be able to fit in pretty much any seat that I have. The VS3, GS, and P2 would be a good snug fit for you.

[NYS13SLIDER]

Do you have a pic of the gs reclineable in red? And a guestimate on when the group buy #5 will be arriving? i so want to do a full red interior.

[Spazzed]

Hey i got some questions about size , which seat would fit me better? im 6'3, 245 pounds , waist of 42" and from shoulder to shoulder is 53.5".
Im in the mid-west so i cant really come to the shop and sit in one of these...

[90240sr]

Can you guys do the vs3 in gradiation red or gradiation black? If so how much picked up?

[RJs13]

have the seat arrived yet?

[Sonic Motor]

Do you have a pic of the gs reclineable in red? And a guestimate on when the group buy #5 will be arriving? i so want to do a full red interior.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/omygudredseet.jpg

Hey i got some questions about size , which seat would fit me better? im 6'3, 245 pounds , waist of 42" and from shoulder to shoulder is 53.5".
Im in the mid-west so i cant really come to the shop and sit in one of these...

Hmm... I'd say the G3 would be your only option.

Can you guys do the vs3 in gradiation red or gradiation black? If so how much picked up?

I know I can get the gradient done in red. I MIGHT be able to get it done in black. MAYBE. It's $20 more per seat.

have the seat arrived yet?

Scheduled for the 15th of this month.

[Sonic Motor]

Still need more orders to close this thing up so I can get the seats here faster!

[MandTPhotography]

I'm fat as fuck, 44 waist, 5'10".

Is the GS big enough? Haha.

If not, what would you recommend?


edit:
nvm, ANYTHING other than the G3?

[99maxgtr]

how much for the gs in black with gradiation shipped to 08003 and how do i got about purchasing?

[FusionR240sx]

Still need more orders to close this thing up so I can get the seats here faster!

rd 4 even here yet?
you said mid April they should be at our doorsteps.

[Sonic Motor]

I'm fat as fuck, 44 waist, 5'10".

Is the GS big enough? Haha.

If not, what would you recommend?


edit:
nvm, ANYTHING other than the G3?

I would recommend the SP2 seat as well:

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/e3seat.jpg

how much for the gs in black with gradiation shipped to 08003 and how do i got about purchasing?

The pair is $520 plus $150 for shipping and handling.

HOW TO ORDER:

1. Go to Sonic Motor - Power and Performance (http://www.sonicmotor.com)
2. Find the seat of your choice
3. Choose the seat trims of your choice
4. Add to cart
5. Enter code "noship" (No need to pay for shipping until the seats arrive)

After that, your order is complete and you will be added to the group buy. Email me if you have any questions or run into any problems while ordering seats. Thanks.

rd 4 even here yet?
you said mid April they should be at our doorsteps.

You're right. Last I heard from my broker is that they should be here around the 15th. Waiting for an email from him now.

[MandTPhotography]

So you are saying with a 44" waist, I can fit in an SP2?

[99maxgtr]

payment sent, oh and on your shipping thing i noticed that there was ground shipping at 127.95 cheaper than the 150 you say is flat rate and also a 7 day ground shipping that says its free?

[RedRedWine]

You have a pm regarding my order

[Sonic Motor]

So you are saying with a 44" waist, I can fit in an SP2?

I'm not sure if you'll fit in the seat or not. I'll ask a buddy of mine if he can sit in the seat and see if he fits. He's about a 44" waist I think.

payment sent, oh and on your shipping thing i noticed that there was ground shipping at 127.95 cheaper than the 150 you say is flat rate and also a 7 day ground shipping that says its free?

The free shipping option is a mistake. Yes, website shipping and handling is a little cheaper. That's why I have everyone on Zilvia order through the website.

You have a pm regarding my order

I'll try to get back to you ASAP about your order.

[FusionR240sx]

Yes, website shipping and handling is a little cheaper. That's why I have everyone on Zilvia order through the website.

i never was informed or saw this.
any updates?

[99maxgtr]

can you update on the list? i want to know how long i have to wait.

[951's 330i]

Anyone in socal have the gs seat or vs3 seat with the universal sliders in their s14? I wanna see how low these sit....Might use my tax refund ha lol

[Sonic Motor]

can you update on the list? i want to know how long i have to wait.

I'll try to get a list up ASAP!

Anyone in socal have the gs seat or vs3 seat with the universal sliders in their s14? I wanna see how low these sit....Might use my tax refund ha lol

This is how it sits in stock form. It can be modified to sit lower.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/f461e864.jpg

[rb26man]

these seats are sex

[951's 330i]

I'll try to get a list up ASAP!



This is how it sits in stock form. It can be modified to sit lower.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/f461e864.jpg

Hey bro can u pm how much the brackets are...I think imma have to stop by to see which one i fit in again lol

[florante rea]

100 for the brackets.

[BracedEunos]

*Edited*

Waiting Patiently

[burtoncr]

You're right. Last I heard from my broker is that they should be here around the 15th. Waiting for an email from him now.

News on round 4 seats?

[Sonic Motor]

100 for the brackets.

Yes that's correct!

News on round 4 seats?

Please PM me for details.

Gonna start handling these group buys differently.

A list of all the people that have paid is on the first page. If you don't see your name on the list please PM or call me. This group buy will close on the 15th of May and I will NOT accept any other orders after that date. No exceptions at all to this rule.

[phantomfoot]

News on round 4 seats?

Anything on Round4???

[951's 330i]

I'll try to get a list up ASAP!



This is how it sits in stock form. It can be modified to sit lower.

http://i303.photobucket.com/albums/nn128/sonicmotor/seats/f461e864.jpg


Is this how it sits with the brackets you offer?

[Sonic Motor]

Is this how it sits with the brackets you offer?

Yes, that is the height as it is. You can remove the spacers from the seat brackets to lower it about half an inch, and you can also have the seat mounted directly to the bracket (no adjustability) and lower it about an inch and a half.

[Razi]

For the fixed bucket seats, if you slide the seats all the way forward on the rails, can people get into the backseat?

How much lower are you in the GS compared to the RSS?
Could you measure like the seat area to roof height when mounted? Or the height from the bottom seat area to the top seat area (The part where you sit)?
I have the RSS's right now and I want to sit a little lower.

[951's 330i]

[Quote = carparthookup; 3408531] Yes, That is the height as it is. You Can remove the spacers from the seat brackets to lower it about half an inch, and You Can Also Have the seat mounted directly to the bracket (no adjustability) and lower it about an inch and a half. [/ Quote]

Ok cool. Ill stop by on monday to figure out which one im for sure going to get.

[Sonic Motor]

For the fixed bucket seats, if you slide the seats all the way forward on the rails, can people get into the backseat?

How much lower are you in the GS compared to the RSS?
Could you measure like the seat area to roof height when mounted? Or the height from the bottom seat area to the top seat area (The part where you sit)?
I have the RSS's right now and I want to sit a little lower.

You might be able to get in the back, but it will have to be a really skinny person. haha.

The GS will sit a little lower than the RSS. The problem is that both of the seats are bottom mount, and it's very hard to make a bottom mount seat sit low in an S chassis. I have a friend who is very tall who just had the seat welded directly to the bottom mount bracket. The easiest way to sit low is to have a side mount seat.

Ok cool. Ill stop by on monday to figure out which one im for sure going to get.

Sounds good. I'll be here.

[Razi]

How many orders do you need until this group buy is complete?

[Sonic Motor]

How many orders do you need until this group buy is complete?

I pretty much have all the orders I need. This group buy is closing on May 15th. I will not take anymore orders after that date.

[superdooper]

Round four update?

[Razi]

I pretty much have all the orders I need. This group buy is closing on May 15th. I will not take anymore orders after that date.
Alright cool!
Thanks for answering my questions.
I bought some coupe taillights from you today and sat in some of the seats while waiting, the GS seems to sit an inch or two lower than the RSS which is what I was looking for.

I'll decide before the 15th then!

[PS13 DRFT]

Anything on Round4???

+1

What's going on with these?

[SR240Z84]

Was wondering . . . anyone ever tried fitting these into a Datsun 240Z? Seems like a great price for some seats, but I don't know how well these would actually fit. Do you have brackets for a 240Z?

[kiss my bumper]

i'll be down for one black cg and one black sp2

[Sonic Motor]

Was wondering . . . anyone ever tried fitting these into a Datsun 240Z? Seems like a great price for some seats, but I don't know how well these would actually fit. Do you have brackets for a 240Z?

Yup, got brackets for the '69-74 240Z.

[icapture]

Yup, got brackets for the '69-74 240Z.


Any idea on fitment for the 240z? Space is pretty limited in these cars, So Im pretty concerned about buying something that may be too wide. Do you have any customers who drive a datsun?

Thanks

[SR240Z84]

Any idea on fitment for the 240z? Space is pretty limited in these cars, So Im pretty concerned about buying something that may be too wide. Do you have any customers who drive a datsun?

Thanks

I have been doing some research and it seems that most seats with a widest width being less then 23" will fit in our cars. Now, this is only for 71-73 from my understanding. I don't know about later models tho . . . so you'd prob want to check that out.

[Sonic Motor]

I have been doing some research and it seems that most seats with a widest width being less then 23" will fit in our cars. Now, this is only for 71-73 from my understanding. I don't know about later models tho . . . so you'd prob want to check that out.

I haven't researched fitment for 240z's and I don't know anyone who owns one. This guys seems to know what he's talking about.

[SR240Z84]

Who sells your 240Z brackets carparthookup? How much do they run for the pair if I'm buying the seats as well. (PS. how much do these seats weigh? GS recliners . . )

[icapture]

Any chance of getting a pic of the GS, or any other seat in the gradation fabric? I would imagine you dont use bride material, so id like to see what they look like.

thanks

[slideamerica]

hey i want my pair! question any idea if these will fit with bmw 328i sedan..got any brackets?

what about sizing im like a 34-36 waist....im not good with numbers and sizes

[PS13 DRFT]

+1

What's going on with these?

Can't help but notice you haven't replied about the seats...

[SR240Z84]

did anyone read the front page? You have to wait until May 15th, they are closing out the GB at that point. At that time they will then put the order in and the manufacturing will be about 6-8 weeks. Sorry, just want to make sure everyone is paying attention.

[slideamerica]

did anyone read the front page? You have to wait until May 15th, they are closing out the GB at that point. At that time they will then put the order in and the manufacturing will be about 6-8 weeks. Sorry, just want to make sure everyone is paying attention.


were all just anxious.....lol

[SR240Z84]

Its all good :)

[Sonic Motor]

Who sells your 240Z brackets carparthookup? How much do they run for the pair if I'm buying the seats as well. (PS. how much do these seats weigh? GS recliners . . )

The brackets are made by Wedge Engineering. It will be $200 for the pair of brackets custom made to fit our seats. The GS weighs about 40lbs with sliders attached.

Any chance of getting a pic of the GS, or any other seat in the gradation fabric? I would imagine you dont use bride material, so id like to see what they look like.

thanks

I'll send you a pic.

hey i want my pair! question any idea if these will fit with bmw 328i sedan..got any brackets?

what about sizing im like a 34-36 waist....im not good with numbers and sizes

Yes, they will fit in a BMW. I can have brackets made for your vehicle.

Can't help but notice you haven't replied about the seats...

I've replied multiple times. If you have a specific questions please PM me.

did anyone read the front page? You have to wait until May 15th, they are closing out the GB at that point. At that time they will then put the order in and the manufacturing will be about 6-8 weeks. Sorry, just want to make sure everyone is paying attention.

Thank you! :love:

[Kaziks]

PM'd interested in P2 Logo, FRP shell: $500
Do you have pictures of this in car?
And I'm 6'0 200 Will this be a tight fit or pretty good?

[Lost_DriFter]

intersted in either the VS3, SP2, or P2 black no logo only need 1 for now...

[Sonic Motor]

PM's replied.

Round 4 seats came in today and I'm unloading the truck right now. I'll sort through them this weekend and start sending them out on Monday. If you haven't paid in full I'll need your payments ASAP.

[ka240zouki]

YAY^^

this is Aric =]

[icapture]

I'll send you a pic.


I haven't received a pic from you yet.

[Sonic Motor]

I haven't received a pic from you yet.

Sorry about that. I just sent you some pictures.

[Psycho 240 Freak]

PM's replied.

Round 4 seats came in today and I'm unloading the truck right now. I'll sort through them this weekend and start sending them out on Monday. If you haven't paid in full I'll need your payments ASAP.

You'll be sending out invoices to the buyers from group 4 right?

[C2AUTOSPL]

Sent ya a PM Jxn...

[Sonic Motor]

You'll be sending out invoices to the buyers from group 4 right?

Yes, working on that right now.

Sent ya a PM Jxn...

PM sent.

[phantomfoot]

Round 4 seats are ready to be pick up?

[zero.offset]

pair of frp vs3 shipped to 83709?

[S13 Charlie]

Ok,

So I took the plunge on a single G3 seat, no frills, just plain black FRP. I paid $98 and some change, so I'm assuming I just can just pay the balance when I pick it up whenever it comes in? Can you confirm that I am good to go on this group buy?

Thanks,

Charlie N.

[Sonic Motor]

Round 4 seats are ready to be pick up?

Yes they are!

pair of frp vs3 shipped to 83709?

$490 shipped.

Ok,

So I took the plunge on a single G3 seat, no frills, just plain black FRP. I paid $98 and some change, so I'm assuming I just can just pay the balance when I pick it up whenever it comes in? Can you confirm that I am good to go on this group buy?

Thanks,

Charlie N.

Yes sir, I got your payment and you are on the 5th group buy.

This group buy closes on May 15th. AKA TOMORROW!

[kiss my bumper]

hey karl it's Scott from Colorado, i sent payment last night. just wanted to make sure im on the list. i didnt see my name up there, but i guess i will see you tonight

[AYE MAN THIS IS KADEEM!!!]

i just made my payment for an sp2 seat on your website, its for kadeem in moreno valley

[icapture]

I'll send you a pic.




Hey Karl,

Got the pics man. Thanks. I do have some questions. The pictures you sent me have "Bride" posted on the headrest area of the seat, as well as in the gradation fabric. I am confused, are these of your seats or are these pictures of Brides? Can you get gradation fabric on the seats that doesnt say Bride?

Also, I havent seen any mention on this thread about saftey tests that have been conducted on these seats. Can you please talk about what testing you have done with the seats? My concern is the seats failing in a crash. A seat belt only works as well as the seat its strapping you into is. If the seat falls apart in a crash then that seatbelt aint gonna do much good. Also, would you say that the one piece seats would be safer than the reclinable ones? You know, less moving parts to break.

Thanks,

Adam

[Sonic Motor]

hey karl it's Scott from Colorado, i sent payment last night. just wanted to make sure im on the list. i didnt see my name up there, but i guess i will see you tonight

Got the payment!

i just made my payment for an sp2 seat on your website, its for kadeem in moreno valley

Got the payment as well!

Hey Karl,

Got the pics man. Thanks. I do have some questions. The pictures you sent me have "Bride" posted on the headrest area of the seat, as well as in the gradation fabric. I am confused, are these of your seats or are these pictures of Brides? Can you get gradation fabric on the seats that doesnt say Bride?

Also, I havent seen any mention on this thread about saftey tests that have been conducted on these seats. Can you please talk about what testing you have done with the seats? My concern is the seats failing in a crash. A seat belt only works as well as the seat its strapping you into is. If the seat falls apart in a crash then that seatbelt aint gonna do much good. Also, would you say that the one piece seats would be safer than the reclinable ones? You know, less moving parts to break.

Thanks,

Adam

I'll send you a PM.

I'll accept all orders till 12am tonight!

[kiss my bumper]

cool thanks man, cant wait

[AYE MAN THIS IS KADEEM!!!]

when i can we expect the seat to get here?

[roorr0]

I sent a PM to you saying that I placed an order. One G3 and one P2.
Can you confirm that I'm on the groupbuy list?

Thanks Karl.

[Sonic Motor]

when i can we expect the seat to get here?

Shooting for 8-12 weeks

I sent a PM to you saying that I placed an order. One G3 and one P2.
Can you confirm that I'm on the groupbuy list?

Thanks Karl.

Yes, you are on the group buy.

[ILLES13]

Finally got my car running, i blew the motor right after i bought these seats. Test fit on the SP2's are nice, very comfortable. Mine are fixed, no sliders on Sparco brackets. I'm a big boy and they hold me snug when cornering, never really pushed my car yet because of the new rebuild. But as far as the seats go, i'm very pleased. Well worth the money and ive received many compliments on them. Quality budget seat for sure.

I'm 5'11'' and 230LBS.
I have moderately broad shoulders, and the bolsters fit me perfectly.

Thanks Jackson! <3

[AYE MAN THIS IS KADEEM!!!]

Shooting for 8-12 weeks




ok cool thanks bro

[davidnino111]

next group buy. ill get a pair.
ill be checking in on it. i just wanna know there another one coming?

[Sonic Motor]

next group buy. ill get a pair.
ill be checking in on it. i just wanna know there another one coming?

I'll keep having group buys as long as there are people willing to pay for these seats. :naughty:

I'll try to post up a final name list soon.

[Sonic Motor]

This is the final list of names. If you don't see your name, please PM me.

1. Josh Bunnell
2. Florante Rea
3. Andrew's Friend
4. Nilayam Patel
5. Peter Kim
6. Martin Sarukhanyan
7. Mario Montoya
8. Emmanuel Adamopoulos
9. David Nong
10. Matthew Ring
11. Werner Castillo / Enrique
12. Daniel An
13. Howard Chen
14. Alexander Hsieh
15. Erik Desilva
16. Matthew Riechmann
17. Edwin DeJesus
18. Charles Neiswender
19. Jason S Patterson
20. Vannaro Keosann
21. Kadeem Richardson
22. Dylan Reinsma
23. Danny Zhao

[PS13 DRFT]

So I can finally say... Thank you.

Happy round 4 buyer right here... the wait? it's worth it people, the money you save is so epic, and these seats are hella on point.

Will take pics once mounted up!

[Sonic Motor]

So I can finally say... Thank you.

Happy round 4 buyer right here... the wait? it's worth it people, the money you save is so epic, and these seats are hella on point.

Will take pics once mounted up!

Awesome! Glad to hear that you like the seats!

[AYE MAN THIS IS KADEEM!!!]

So I can finally say... Thank you.

Happy round 4 buyer right here... the wait? it's worth it people, the money you save is so epic, and these seats are hella on point.

Will take pics once mounted up!

what seat did you get?

[K_style]

This is the final list of names. If you don't see your name, please PM me.

1. Josh Bunnell
2. Florante Rea
3. Andrew's Friend
4. Nilayam Patel
5. Peter Kim
6. Martin Sarukhanyan
7. Mario Montoya
8. Emmanuel Adamopoulos
9. David Nong
10. Matthew Ring
11. Werner Castillo / Enrique
12. Daniel An
13. Howard Chen
14. Alexander Hsieh
15. Erik Desilva
16. Matthew Riechmann
17. Edwin DeJesus
18. Charles Neiswender
19. Jason S Patterson
20. Vannaro Keosann
21. Kadeem Richardson
22. Dylan Reinsma
23. Danny Zhao

Is that my name on #5 ?

[Sonic Motor]

Is that my name on #5 ?

Yes, that is your name.

[JUNSupraTT]

pm sent :)

[Jza]

Karl,
Do you know when the group buy going to close? I want to get an estimate of time I could get the replacement cushions. Let me know.

-Alan

[Sonic Motor]

pm sent :)

PM replied.

Karl,
Do you know when the group buy going to close? I want to get an estimate of time I could get the replacement cushions. Let me know.

-Alan

Group buy has been closed since the 15th of this month. Seat manufacturing should already be in process.

[AYE MAN THIS IS KADEEM!!!]

do you know when you are going to start the next group buy?

[Sonic Motor]

do you know when you are going to start the next group buy?

As soon as this group buy leaves China I'll start the next group buy.

[AYE MAN THIS IS KADEEM!!!]

ok cool, im going to order another seat when it starts up

[Prime]

I've got some bottom mount sparco knockoffs that sit way too high on Bride MO rails, but I'm a big guy and this is a daily.

I know it's asking a lot, but I'm more for comfort than anything else, and my stock seats are broken (yes, broken).

6'3" 225lbs 36" waist 44" shoulders

If I have to give up recline, I will, but the height is killing me right now. Make a recommendation and unless I get cancer I'll be in on the next buy.

[AYE MAN THIS IS KADEEM!!!]

I've got some bottom mount sparco knockoffs that sit way too high on Bride MO rails, but I'm a big guy and this is a daily.

I know it's asking a lot, but I'm more for comfort than anything else, and my stock seats are broken (yes, broken).

6'3" 225lbs 36" waist 44" shoulders

If I have to give up recline, I will, but the height is killing me right now. Make a recommendation and unless I get cancer I'll be in on the next buy.

im 6'4 180lbs 34" waist, and he recommended either the sp2 (the seat i bought) or the g3(the seat im going to buy in the next group buy)

[Sonic Motor]

I've got some bottom mount sparco knockoffs that sit way too high on Bride MO rails, but I'm a big guy and this is a daily.

I know it's asking a lot, but I'm more for comfort than anything else, and my stock seats are broken (yes, broken).

6'3" 225lbs 36" waist 44" shoulders

If I have to give up recline, I will, but the height is killing me right now. Make a recommendation and unless I get cancer I'll be in on the next buy.

For you, I would recommend the G3 seat. =)

[SR240Z84]

Any updates on the production of these seats? Just checking in. (I'm number 16 on that list hehe)

[sincity_sil80]

i wanna get it on the next group buy!

[eytsics]

when do you start the next one??????

[tpetrucci33]

yea i want in!

[eytsics]

just let me know when...i may get one bucket...

[Sonic Motor]

I will start the next one as soon as I know when this one ships out.

[Backwoodsboy]

man i want one g3 frp non logo...deff wanna know when the next one is...i need a new seat

[Faztkarvroom89]

do you guys have the brackets in stock or do you guys have to orders them gs seat specifically ?

[Sonic Motor]

man i want one g3 frp non logo...deff wanna know when the next one is...i need a new seat

Just keep an eye on the group buy section! Probably be starting one in July.

do you guys have the brackets in stock or do you guys have to orders them gs seat specifically ?

I have brackets in stock for the GS seat.

[s13yaobling]

Sent you PM thank you

[jah]

priced shipped too 78259 for G3 Seat, JGTC Inspired seat with rails?

[Sonic Motor]

priced shipped too 78259 for G3 Seat, JGTC Inspired seat with rails?

Shipping and handling is $150 for any of these seats.

[SR240Z84]

Was wondering how you will be contacting everyone when the seats are ready for pickup?

[Sonic Motor]

Was wondering how you will be contacting everyone when the seats are ready for pickup?

I usually just call everyone with the phone numbers that were provided. If no answer I send PM's or emails.

[AYE MAN THIS IS KADEEM!!!]

any word on when the seats will be here?
btw when i talk to you (or one of the guys down at sonic) on the phone awhile back you said that the seats come with rails will come with rails, but when i went with my friend to pick up his p2, it didnt come with rails, although he didnt need them anyway. im going to need them for my car, do i have to buy a set or do they come with the seat?

[NINJASPY]

comes with brackets. No rails.

[AYE MAN THIS IS KADEEM!!!]

comes with brackets. No rails.

ok ill have to buy some then, thanks dude

[roorr0]

"- All seats come with universal SLIDERS, but the bracket will need to be purchased separately."

Its in the first post.

[NINJASPY]

Ok to make it clear... since people always confuse them.
Sliders=Rails, they MOVE and slide on a rail.... NOT INCLUDED
Bracket= bottom mounts, and side mounts. THEY DONT MOVE. Some companies sell sliders/rails as "brackets" or sometimes called sliding brackets. Very easily confused.
L shaped things that ARE included in the bucket seats. Which mount on the floor or on top or rails/brackets
LOOK AT the pics, that is what is included. Its not hard to figure out.

I got a vs3, bought buddy club seat rails.

Buddy-Club-Racing-Spec-Seat-Rails (http://www.sonicmotor.com/Buddy-Club-Racing-Spec-Seat-Rails-p/bc-sr-car.htm)

[Sonic Motor]

Ok to make it clear... since people always confuse them.
Sliders=Rails, they MOVE and slide on a rail.... NOT INCLUDED
Bracket= bottom mounts, and side mounts. THEY DONT MOVE. Some companies sell sliders/rails as "brackets" or sometimes called sliding brackets. Very easily confused.
L shaped things that ARE included in the bucket seats. Which mount on the floor or on top or rails/brackets
LOOK AT the pics, that is what is included. Its not hard to figure out.

I got a vs3, bought buddy club seat rails.

Buddy-Club-Racing-Spec-Seat-Rails (http://www.sonicmotor.com/Buddy-Club-Racing-Spec-Seat-Rails-p/bc-sr-car.htm)

MOSTLY true. The bottom mount seats come with sliders, but the side mount seats do not come with sliders if you buy the BC sliders from us. They are available upon request. Brackets are not included with any of the seats. The bracket is what mounts the seat to the floor. The side mount seats come with a fixed bracket on the side of the seat to make the seat a bottom mount. Those are not necessary when you go with side mount rails. I hope that cleared things up; or did I just confuse everyone again? =)

[SR240Z84]

have you received any word on the seats yet?

[Sonic Motor]

These seats should be here on Friday! If you haven't paid in full, it would be a good time to do that now. I will be opening a new group buy shortly.

If you have any questions regarding your order, please send me a PM.

[airhead]

pics request of E2 and DG Seats installed?

[99maxgtr]

so whats up with the seats? i think i have been more than patient but 5 months from the original 3 months is a bit rediculous. honestly i don't even want the seats any more. a bit of an update would be nice.

[burtoncr]

Did these ever come in? Looking for my lumbar pads.

[burtoncr]

Did these ever come in? Looking for my lumbar pads.

Still havent got a response to my PM.