intercooler install

[tinys s14]

im doin a swap and i was just wodering if its possible to install a intercooler without removing your crash bar might be kinda a noob question lolz

[s14 drftwayz]

im doin a swap and i was just wodering if its possible to install a intercooler without removing your crash bar might be kinda a noob question lolz

depending on the size of the intercooler, u might need to remove if not just cut in so u can fit it perfectly thats what i did

[LayNLow]

Sure you can, it all depends on what i/c you get. PBM makes this kit:
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050396.jpg
You can check it out here.
http://zilvia.net/f/forced-induction/293543-parts-shop-max-high-mount-intercooler-kit-real-time-quotes-ordering-thread.htm
You can retain the whole front crash bar with this kit.

[Homer_Simpson]

I trimmed the back of my crash bar to install my intercooler.

[bl3ujay07]

Question been answered before, but its not necessary. Had a greddy M spec and did not need to cut it. It mounts right behind it.

[nachos14]

Did a blitz cs kit in my S14. I cut inch in the crash bar and fit super good. even got the stock zenki fogs to fit with no problems.

[Corbic]

Sure you can, it all depends on what i/c you get. PBM makes this kit:
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050396.jpg
You can check it out here.
http://zilvia.net/f/forced-induction/293543-parts-shop-max-high-mount-intercooler-kit-real-time-quotes-ordering-thread.htm
You can retain the whole front crash bar with this kit.


Just not your pop-up headlights.

[Walperstyle]

It is kinda a noobie question. Sorry, but only you know the size of you intercooler, and how much space you have. Get creative yourself, its just an intercooler.