S13 SR20 electrical Problem 911!!!!!!

[ILL S13]

whats up trying to figure where the problem is and how to find it so heres the story i removed the cheap ass alarm it had and now it doesnt crank the starter clicks and everything the ignition wires are all connected correctly where would I start? any help would be appreciated

[Z U L8R]

you just made a bigger problem for yourself. you don't have an issue someone can just tell you how to do 1,000 miles away on a computer. your car needs to be looked at.

my advice, quit messing with stuff you have no idea what you're doing, and take it to someone who does.

Dave

[ILL S13]

you just made a bigger problem for yourself. you don't have an issue someone can just tell you how to do 1,000 miles away on a computer. your car needs to be looked at.

my advice, quit messing with stuff you have no idea what you're doing, and take it to someone who does.

Dave

Thanks for absolutely nothing. :mephfawk:

[Z U L8R]

your thread = "i started ripping shit out of my car, now it doesn't work, HELP!"

problem = you

solution = let someone other than you fix what you messed up


where you should start is, get in the fsm and look at your basic power and ground distributions. look at the wiring for the ignition switch. test to see that the wires going to the ignition switch get power and what not when you put it in the positions.

thick white/red = constant power at all times
black/white = ignition ON position power
black/yellow = power in start position

if you're looking in the fsm like a deer in the headlights, and you have no idea what to make of all that information.....then what can i tell you....you need to get a buddy who's a mechanic to fix your car.

making a vague thread about how you messed with your car and now it doesn't work, where do i start....the reason no one responded to it is because 1. there's a million things it could be. 2. your lazy 3 line description that took you 10 seconds to type isn't worth my 20 minutes of explaining things, if you don't really give a shit, why should i?. 3. it's hard to explain how to test things to someone who has no idea what they're doing.

where do the people trying to help you start?

based on the information you've given, at this point all i can do is tell you where to stop.

stop ripping shit out of your car then wondering why you have problems when you don't know wtf you're doing.

Dave