FS: SR20 parts (coilpacks, ECU, ignitor, etc)

[Rittmeister]

Need to start moving some of these things out of here. Prices are OBO but DO NOT include shipping. This is NOT a part-out - if it's not listed here I don't have it. These are spares I've accumulated over the last 5 years or so, and since the car is sold I'm selling these off as well. Pictures of many of the items are below

RWD SR20DET parts (all from redtop SR):

-Stock T25/T28 compressor inlet and outlet. 2-bolt inlet is perfect, 3-bolt outlet has a crack that was JB-welded. Served perfectly for 5 years before turbo upgrade called for other parts. Outlet comes with bolts. $40 for both.
-AC compressor- $MAKE OFFER
-Water Pump (near new) - $50

-Fat 02 sensor (blacktop) - $20
-Stock oil pan with two custom hi-temp silicone gaskets - $40

-Greddy hotpipe for BOV (this is an 8-inch piece of cast aluminum pipe with a Greddy Type-S or -RS flange cast into it, fits into the stock Redtop hotpipe) includes gasket and bolts - $40


S13 chassis/interior etc:

-Stock springs – make offer
-Stock tension rods (shot bushings, good for urethane replacements) - $20
-Stock front lower arms (good for pressing in S14 balljoints for 5-lug) - $40
-Front suspension upper assemblies with near-new OEM strut mounts from PDM - $60
-Rear upper assemblies - $40
-S13 non-ABS front brake calipers/brackets/lines - $65 for everything, no pads
-Open diff/outputs (good for welding): $65


-Steering column cover (top and bottom) - $20
-Wiper motor - $20
-Sun visors NOT rain visors (gray, coupe)- $20 for both

-Turn signal and wiper stalks, $25 each or $45 for both

-Coil cover - professionally painted Subaru Rally Blue with black letters and clearcoat - $35

SOHC MAF/pigtail/adapter:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2843.jpg

Turbo outlet/inlet (T25/T28):
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2847.jpg

Water pump:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2840.jpg

Greddy hotpipe:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2848.jpg

Steering column cover:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2845.jpg

Wiper and signal stalks:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2846.jpg

Valver cover and blue coil cover:
http://i25.photobucket.com/albums/c88/kwstine1/IMG_2641.jpg

Please PM with questions/offers. I can provide pics of a lot of this stuff if needed.

[Rittmeister]

To the top.

[afishysilvia]

PM sent for injectors

[jonny9229]

Hey call me asap need to kno if u have the injectors and harness got cash 7606888741

[Nismoslider]

can you do the ac compressor, and all harware (brackets) for $100 shipped to 32164??? pm me

[Rittmeister]

Injectors are sold. There was never a harness with the injectors.

PM-ing about the compressor.

[Options13]

inlets outlets, so they are interchangable with a t28 right? im assuming these are from a t25? i don't see how the outlets can be interchangable when the t28's have bigger housings compared to t25's..?

[Rittmeister]

They are interchangeable, at least on OEM Nissan turbos. The S14 and S15 T28 has a slightly different angle but the bolts all line up properly. Even the gaskets are the same.

The angle is the reason for the clocking adapters that you can get to use the T25 inlet/outlet on a T28 but still use the S13 intercooler piping. You could use the inlet/outlet without the adapters but you'd need S14 or custom intercooler piping.

[Rittmeister]

To the top. I will make package deals on just about anything here.

[two40oz]

does the water pump come with the pully? thanks

[Rittmeister]

Water pump does not include a pulley, nor do I have a spare sitting around. The only WP pulley I had was on the car when I sold it... sorry :(

[Rittmeister]

Coilpacks, ECU, Ignitor and Valve cover are sold.

[Fullboost99]

Still have the timing guides?

[Rittmeister]

Still have the timing guides?

This is NOT a part-out - if it's not listed here I don't have it.

As stated in the original post... sorry.