s15specR
02-09-2010, 10:03 AM
Location: TN
Price: $400
Condition: Been on the dyno!
Information:
We have the necessary adaptors and pieces to make these injectors fit almost any application
ALL ACCESSORIES ARE INCLUDED WITH EACH SET OF INJECTORS, INCLUDING THE INJECTOR CLIPS
Honda applications - B series, H series, K series, F series, D series, NSX
Mitsubishi EVO and all 4G63
Toyota Supra
Subaru WRX
Nissan RB and SR with top feed
Nissan VQ
Hayabusa
Kawasaki ZX14
RX7 with top feed rails
Almost any domestic application
If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
These are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm or 14mm top orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail.
These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other 1000cc injector on the market. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level. Price is per injector and includes the adaptor for the top and an injector clip with pins Please put your engine type in the comments section when purchasing
Injector Dynamics (http://injectordynamics.com/)
Price: $400
Condition: Been on the dyno!
Information:
We have the necessary adaptors and pieces to make these injectors fit almost any application
ALL ACCESSORIES ARE INCLUDED WITH EACH SET OF INJECTORS, INCLUDING THE INJECTOR CLIPS
Honda applications - B series, H series, K series, F series, D series, NSX
Mitsubishi EVO and all 4G63
Toyota Supra
Subaru WRX
Nissan RB and SR with top feed
Nissan VQ
Hayabusa
Kawasaki ZX14
RX7 with top feed rails
Almost any domestic application
If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
These are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm or 14mm top orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail.
These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other 1000cc injector on the market. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level. Price is per injector and includes the adaptor for the top and an injector clip with pins Please put your engine type in the comments section when purchasing
Injector Dynamics (http://injectordynamics.com/)