HID retrofit setup

[MrMcgarrett]

These are REAL HID lights. No Ebay junk.
Set up is complete.
-Valeo Xenon projectors
-Philips ballast
-Philips D2R bulbs
-Pre-wired Harness

The harness has a HB4 plug(J30, Z32) that can be easily switched out for any application.
The projectors have 2.5in lenses.
One lens has a small nick.
The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug.
Easy to hook up after retrofitting the projectors.
Just bolt down the ground wires on the ballast, hook the power cable up to the positive battery terminal, then plug in one of your headlight plugs to turn them on and off.

$280 shipped
Price is FIRM
Not parting out

http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup001.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup002.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup003.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup004.jpg

[MrMcgarrett]

Back up to the top.

[g_mac530]

bump for you. Don't buy lame ebay hid "kits" do it once, do it right. retrofit all the way folks

[MrMcgarrett]

Last time to the top.

[bejota180sx]

are these the high beam projectors that most places carry online? or low beam...
im guessing no pictures of output on these?!

[harangatang]

good parts. good price!!
tsx or S2 projectors would be much better however..

glws mang

[MrMcgarrett]

They are low beam projectors.
I'll see if I can get a pic of them on.