S13 and SR20 parts

[Rittmeister]

Need to start moving some of these things out of here. Prices are OBO (a little) and DO NOT include shipping. This is NOT a part-out - if it's not listed here I don't have it. These are spares I've accumulated over the last 5 years or so, and since the car will hopefully sell soon I'm selling these off as well.

S13 chassis/interior etc:

Stock springs – make offer
Stock tension rods (shot bushings, good for urethane replacements) - $20
Stock front lower arms (good for pressing in S14 balljoints for 5-lug) - $40
Stock sway bars - make offer
Front suspension upper assemblies with near-new OEM strut mounts from PDM - $60
Rear upper assemblies - $40
S13 non-ABS front brake calipers/brackets/lines - $65 for everything, no pads
Aftermarket aluminum skid plate (protects oil pan) - $40

Open diff/outputs (good for welding): $75

Shifter surround (plain black): $25
Steering column cover (top and bottom) - $25
Air vents - $20 for all
Wiper motor - $20
Sun visors NOT rain visors (gray coupe)- $20 for both
Dome light (gray coupe) - $10
Power steering high-pressure line (aftermarket from Autozone, fits KA-DE or SR) - $35


RWD SR20DET parts:

4 Coilpacks + harness: $110
Ignitor chip: $75
Starter (worked fine): $125
AC compressor- $50
Water Pump (near new) - $50
CAS Cover (looks new) - $15


Stock T25 with oil and water lines, worked great but might need a rebuild, I don't know enough about it. Didn't burn oil or smoke AT ALL: $100
370cc injectors in S13 stock fuel rail: $120
SOHC Maf/filter adapter/wiring pigtail/3”silicone adapter (works with redtop SR): $60
SR stock intake tube (MAF to compressor inlet): $30
62 ECU: $125
Stock 02 housing - $20
Fat 02 sensor (blacktop) - $20
Stock oil pan with two custom hi-temp silicone gaskets - $40
Spark plugs – 2 sets $20/set Bkr6e
Transmission crossmember - $40

Greddy hotpipe for BOV (this is an 8-inch piece of cast aluminum pipe with a Greddy Type-S or -RS flange cast into it, fits into the stock Redtop hotpipe) includes gasket and bolts - $50
Attain shifter (stock throw but solid metal, no smooshy rubber) - $60

Valve cover w/gasket - painted very pale gold color $40
Coil cover - professionally painted Subaru Rally Blue with black letters and clearcoat - $35
Coil cover 2 - (stock) $20

Please PM with questions/offers. I can provide pics of a lot of this stuff if needed.

[Rittmeister]

Bump it up. All prices are OBO.

[dat411kid]

I need the Valvecover "T" fitting from the sr20det cover....

pm me...

[Rittmeister]

You already PM'd me. I PM'd you back two days ago. I am still not pulling the T off the valve cover. If you'd like to buy the complete valve cover, it's for sale and you can check your PM for details.

[Rittmeister]

Someone has to need some of these things.

Now accepting near-lowballs. Need to get this stuff out of here.

[Rittmeister]

Skid plate and sway bars gone. All other items available.

[Propaganda]

I'm interested in the T25. If you don't know much about the T25, how do you know it doesn't smoke? Picks?

[Rittmeister]

T25 is actually already sold. Sorry.

[midnightouge]

How much for the oil pan shipped to 94565?