shinrekka
01-22-2010, 04:43 PM
My queston is, if I use the arias 10.8 or 10.7 compression pistons will I be able to use the Nismo R4 cam and not have any issues with piston to valve clearence?
Im gathering up the bits and peices of my next rebuild, and really dont have many options for high compression pistons, and my cam selection is also very limited to what im willing to use. This is my what my build will consist of.
Rebuilt KA24E, tuned for E85 on an AEM EMS
-arias 10.8 compression pistons,
-nismo R4 cam,
-OBX header, 3" apexi n1 exhaust
-Ebay $9 intake w/ k+n filter
-Lightweight fidanza flywheel
-Lightweight driveshaft
Dosent sounds like much of a build but im also going to be running this motor with E85, and tunning it with an AEM ems so im hoping to hit around that infamous 200whp mark.
Im gathering up the bits and peices of my next rebuild, and really dont have many options for high compression pistons, and my cam selection is also very limited to what im willing to use. This is my what my build will consist of.
Rebuilt KA24E, tuned for E85 on an AEM EMS
-arias 10.8 compression pistons,
-nismo R4 cam,
-OBX header, 3" apexi n1 exhaust
-Ebay $9 intake w/ k+n filter
-Lightweight fidanza flywheel
-Lightweight driveshaft
Dosent sounds like much of a build but im also going to be running this motor with E85, and tunning it with an AEM ems so im hoping to hit around that infamous 200whp mark.