wannas13
01-19-2010, 07:19 PM
well i had a 4.64 ring and pinion in my stock 240 rear but after breaking numerous axles i decided i wanted to switch to the q45 rear end setup. so from there i decided to try and have my ring gear and pinion set put into that(4.64). my problem is that it seems like there is some play in the differential if i grab the yoke on the pinion flange and move it up and down. so what i really need to know is, is this in the shimming of the pinion or is it possible that when they set it up they didn't change the pinion bearing closest to the nut. from what i found in the past it should be the same as a stock 240 rear. any information would be great