PDA

View Full Version : I found this plug, what does it go to?


Huntsman2007
01-14-2010, 11:50 AM
So ive been working on this project for the past few weeks, and ive found this plug that doesnt plug into anything, and i have no idea what it goes to. Its located in the passenger side wheel well, right on the interior side of the big rubber grommet towards the door side of the well. My dash lights dont work nor have they ever since i got the car, along with my turn signals and hazzards, could that be for this? Thanks for your help guys!
http://i163.photobucket.com/albums/t301/huntsman2007/Mobile%20Uploads/0114001322a.jpg
http://i163.photobucket.com/albums/t301/huntsman2007/Mobile%20Uploads/0114001322.jpg

Huntsman2007
01-14-2010, 11:56 AM
sorry for the typo in the title guys!

Sileighty_85
01-14-2010, 12:01 PM
EDIT: my bad thats in the wheel well, hummmm not sure right now.

Huntsman2007
01-14-2010, 12:35 PM
this little hummer is got my mind flustered!

Huntsman2007
01-14-2010, 12:41 PM
it was actually inside the cab, right behind the grommet, but i pulled it into the wheel well to take a picture

Sileighty_85
01-14-2010, 12:41 PM
i just looked at mine, i have the same plug NOT connected

was your car an Auto before?

yukon
01-14-2010, 02:14 PM
is that the inhibtor switch plug for auto. black wire with yellow stripe. and black wire with white stripe.

DreamN
01-14-2010, 02:21 PM
That's looks like one of the plugs from your gauge cluster that plugs into the main harness.

Though don't know how it could have gotten all the way on the passenger side.

Huntsman2007
01-14-2010, 02:38 PM
Yup it was an auto originally. Well that makes sense. Now i just gotta figure out where these spare wires on the ecu harness go to! is there a big pinout somewhere on the sr20 wiring harness?

projectRDM
01-14-2010, 06:13 PM
Geez what a bunch of shitty answers.

It's the plug from the ECU harness to the ATC. Not needed if the car is no longer auto.

jspaeth
01-14-2010, 06:29 PM
Geez what a bunch of shitty answers.

It's the plug from the ECU harness to the ATC. Not needed if the car is no longer auto.


This is why I have an internal list of maybe 20-30 people on this forum whose answers I actually list to hahaha

Huntsman2007
01-15-2010, 06:43 PM
hahahahahah thanks guys.

g6civcx
01-15-2010, 10:14 PM
For everyone, when you ask this type of question, please give as much info about the car as possible.

In this case, we need to know the year of the car as well as what swap was done to the car.

It would also help to list the pinout of the plug, including the colour and position of each wire.

yukon
01-16-2010, 07:02 PM
For everyone, when you ask this type of question, please give as much info about the car as possible.

In this case, we need to know the year of the car as well as what swap was done to the car.

It would also help to list the pinout of the plug, including the colour and position of each wire.

dream on. these parasites are too lazy to give that information. i thought there was a special thread for retarded questions. Not that I agree with the idea of reducing clutter by dumping stupid questions in one thread.

Z33dori
01-24-2010, 08:21 PM
thats the connection for the Dash. just drop down the glove box and there should be a matching one.

projectRDM
01-25-2010, 01:49 AM
thats the connection for the Dash. just drop down the glove box and there should be a matching one.

Dash plug is brown.

Ceepo
01-25-2010, 09:38 AM
^knows his stuff, listen to him...

g6civcx
01-25-2010, 09:42 AM
^knows his stuff, listen to him...

I disagree. He doesn't know anything. Don't listen to a word he says.

He's only out to educate you.