How to adjust my clutch pedal?

[jdm213]

ok i cant find g6civcx (http://zilvia.net/f/members/g6civcx.html) post about this. I am a noob but I want to learn, so can anyone explain this to me, here is the picture http://i840.photobucket.com/albums/zz327/240SXJOHNY/IMG01094.jpg ok so what is it that I have to do to make my engagement lower rather than lifting my foot of alomst all the way before i can launch Thanks you zilvia, in the meantime im still gonna be looking for his thread =]

[fos240]

break the jam nut loose on the adjuster screw. turn the screw to make it go further up in the turn buckle. tighten the jam nut back up.

frankie

[jdm213]

break the jam nut loose on the adjuster screw. turn the screw to make it go further up in the turn buckle. tighten the jam nut back up.

frankie

what do you mean jam nut loose on the adjuster screw

[g6civcx]

What car is this? Auto to manual? Originally manual? S13 S14?

[Ceepo]

tighten the rod that connects to the mastercylinder(make it longer in theory) also bleed the system that may help...

[jdm213]

tighten the rod that connects to the mastercylinder(make it longer in theory) also bleed the system that may help...

its bled thoughly so its just the pedal issue

[jdm213]

What car is this? Auto to manual? Originally manual? S13 S14?

this is an s13,and has always been manual

[SrRaycer]

What car is this? Auto to manual? Originally manual? S13 S14?

.....aww i hate when guys chime-in to a post and don't know what they're talking about. He said his clutch pedal, so its obviously manual. s13, or s14 they are adjusted the same way.

For some reason I can't see the photo but... There is a rod on the master cyl that goes through the firewall to the clutch pedal arm. This rod can spin, it must be turned counter-clockwise. Do it in small increments and try it out

[Couped_up'd]

.....aww i hate when guys chime-in to a post and don't know what they're talking about. He said his clutch pedal, so its obviously manual. s13, or s14 they are adjusted the same way.

For some reason I can't see the photo but... There is a rod on the master cyl that goes through the firewall to the clutch pedal arm. This rod can spin, it must be turned counter-clockwise. Do it in small increments and try it out

What this cool guy said.


Some of the others.:hahano:

[g6civcx]

.....aww i hate when guys chime-in to a post and don't know what they're talking about. He said his clutch pedal, so its obviously manual. s13, or s14 they are adjusted the same way.

For some reason I can't see the photo but... There is a rod on the master cyl that goes through the firewall to the clutch pedal arm. This rod can spin, it must be turned counter-clockwise. Do it in small increments and try it out

Of course I don't know what I'm talking about when the original question is vague and has no information. It could be an S11 for all I know.

But then again we get the same question every week so I should know by now.

I only know this: http://zilvia.net/f/s-chassis/297254-ultimate-clutch-pedal-thread.html

[jdm213]

ok well thanks man i have learned from your thread thats all i needed works like a champ. Case Closed =]:duh:

[silvia2011]

.....aww i hate when guys chime-in to a post and don't know what they're talking about. He said his clutch pedal, so its obviously manual. s13, or s14 they are adjusted the same way.

For some reason I can't see the photo but... There is a rod on the master cyl that goes through the firewall to the clutch pedal arm. This rod can spin, it must be turned counter-clockwise. Do it in small increments and try it out

Hey man I did everything you said and adjusted my clutch too and now it started to leak a little fluid from the rod that I adjusted that goes into the master cylinder. In backed it back up to where it was before and it seams it's still leaking, any ideas?? Thanks

[jdm213]

Hey man I did everything you said and adjusted my clutch too and now it started to leak a little fluid from the rod that I adjusted that goes into the master cylinder. In backed it back up to where it was before and it seams it's still leaking, any ideas?? Thanks

did you just fucken reviv my old thread way to go num nuts :lockd:

[silvia2011]

did you just fucken reviv my old thread way to go num nuts :lockd:

That's what it looks like huh dumb fuck.. Why you gotta be hatin on fellow 240 owners I'm tryin to figure my shit out not "revive" your old thread

[hOngsterr]

you need a new master cause your shits giving out. lol

[silvia2011]

you need a new master cause your shits giving out. lol

well it worked fine before i fucked with it and it didnt leak. i was talking to someone and he told me it may be the seal that is in between the firewall and the master cylinder, that i might have torn it when i was adjusting it

[Wake]

Bottom line is if its leaking you need a new one jackass.

[hOngsterr]

^^ like button.