FORGED Sr24DET!! 425whp @ 14psi!!!!

[krabstarr]

have a fully forged sr24det for sale (s13 black top)
The motor only has 2600km(break in) on it but unfortunately someone rear ended me and the car sustained too much damage to fix (not worth it)...at the same time i'm parting my car out (full of after market pieces..just call if you need anything to check if i got it)

The engine was built at Autoworx canada by Haig


Head
BC 272cams exhaust and intake
BC oversized valves +1mm
BC titanium valves retainers
BC valve springs
Tomei rocker arm stoppers
HKS adjustable cam gears
Greddy intake plenum
Q45 throtle body ( custom mount )
Sard top mount fuel rail
Sard 800cc injectors
Sard fuel psi adjuster
Cometic steel head gasket 1.2mm
Custom candy gold valve cover
Spitfire coil packs and ing amp
Stage 3 port and polish

Block

Wiseco custom pistons 88.5mm bore 9.4.1 compresion
Eagle rods
Carrillo stroker crank 2.35L (92mm stroke)
Greddy oversized oil pan
S15 oem oil pump
Exedy stage 3 clutch


Trany

Stock 5 speed
Cosmo racing short shifter


Brain

Apexi power fc dejectro (mafless)


The wire harness made by Robin Almasi for a 92 240sx.
The only thing missing is the turbo Gt32 sold.
I am asking $8500u.s nego you can call me any time +1 514 862 8311 (the motor is in Montreal, Canada)

I am also willing to ship anywhere for free, just need your adress


ps: i also have a bumch of after market pieces for sale from the car:

Tanabi sway bars pair 300$
Nismo power brace 200$
5lug full conversion 550$
Willwood hand breake hidolic 200$
Cusco rear strut bar 50$
Intercooler 18.5x12x3 mint condition 200$
Greddy oil cooler kit with B&M rad new never instaled250$
NX nitrous kit 75-140 shot with 10 lb bottle new never instaled 550$

http://img188.imageshack.us/img188/4029/greenbichenginebay.jpg
http://img28.imageshack.us/img28/2729/s13silviaenginebay.jpg

[rbpwrdsil40]

u can buy a 240sx with a built sr for less than that.. price is steep and that doesnt include a turbo ? wtf?

[aziankingz]

for 8500.. you can get a clean s14 with a rebuilt sr.. and it comes with a turbo.. duh..

[fos240]

yeah, but what you can't get from those sr20 cars is torque. i imagine this stroked sr would be a lot more fun to drive.

frankie

[TougeLabs]

glws its never going to happen, but good luck. I tried selling my brand new stroked sr for half that and never had anyone come through.

[jza240sx]

last motor in my s14 was a fully built 2.3 liter stroker w/ stock turbo. I pulled 275 whp on stock boost :D

[krabstarr]

motor still for sale make an offer someone

[rc1honda]

3,500 LMK And ill pay for shipping

[s13gebala]

gtfo :down:

[jester757]

intersted in your oil cooler you have listed. email me at [email protected] with some pics please

[ETHANOLED SR]

I still don't understand how you are running 88.5mm pistons with no sleeves??? :eek:

[krabstarr]

I need this engine gone its nego so make an offer will ship to you

[BooStedS13SleePeR]

holy poop balls fuck for 8500 u can buy a s13 with a fully build sr in it! lol but glws its got good parts in.

[Whitesil80315]

Do you still have the car? id be interested in the front end.

As for the motor. The price is Fair. You have a lot of parts that cost big bucks and I don't know why everyone is talking about how they can buy a "fully built sr 240" for that price when this thread is about selling a "fully built motor"

GLWS though.

[krabstarr]

hey look for all of you that say and think you can get my setup and in a car for less that my price sorry but your all a bunch of dumb kids that probably don't even know what a forged motor meens take down all the parts I have on the motor and add up all the prices your going to see that shit goes up fucking fast the motor costed me over 12.000$ buy the time it was runnig the cheapest sr forget I'v seen was 10.000$ and not stroket so keep taking all the shit you want I am loving it actualy its realy funny thanks.

[juve_240sx]

hey look for all of you that say and think you can get my setup and in a car for less that my price sorry but your all a bunch of dumb kids that probably don't even know what a forged motor meens take down all the parts I have on the motor and add up all the prices your going to see that shit goes up fucking fast the motor costed me over 12.000$ buy the time it was runnig the cheapest sr forget I'v seen was 10.000$ and not stroket so keep taking all the shit you want I am loving it actualy its realy funny thanks.


no your not loving it thats why you get mad lol

[urnext]

Still for sale?

BTW you can buy a tomei motor for about 2 g's more and its brand new

If the price is right I'll consider buying this but $8500 is too much

[jbballa9876]

good luck sellin it, how do you figure selling a nismo power brace for 200? i think anyone here knows prices are bs

[WTFaNG]

That Romeo motor for two gs more isn't built to near what this one has in it, the one one thats built is twice as much as this one.

[90hatchie]

Nismo - Power Brace II - Nengun Performance (http://www.nengun.com/nismo/power-brace-ii)

whats so special about ur power brace that makes it cost more then one brand new?

[DaveTezza]

now what would i rather buy, a "forged fully built" sr20det or this that has a hella clean sr20 in it for the same price: http://zilvia.net/f/cars-sale/293761-fs-1993-240sx-tons-mods-quality-parts-8500obo.html

LOL!!!

[S13 curtis]

you guys do know the crank for that motor goes for over $1,500 alone

the price is a bit high tho i think$4500-5500 seems like a fair price just my .02 because its missing a turbo.

hope you arent on stock sleeves tho.

[ETHANOLED SR]

why are you not addressing the sleeve question? this motor is not worth a penny if you bored it out to 88.5 with no iron sleeves. You do have quality parts but the motor without a turbo for $8500 is too high!!! Put up pics of the internals and tell us what sleeves it has. You will start to get offers!

[nismo tuned s14]

$8,500 Canadian?

1 Canadian dollar = 0.95057 U.S. dollars

So it would be closer to $8,000, if we're talking Canadian.

[krabstarr]

ok ill take the whole engine apart just so you can see what sleves look like...sure...sure........they are dart sleves and the machine shop that bored my motor ordered them....


and guys honestly.....its your pick...there are probably alot of other things you can buy for 8500$ like getting head from 100 prostitutes, or eating at mc donalds for the next year everyday 3 times a day, or hell, even get a clean 240sx with no guts.........the point is that different people put different value importance on different stuff.....that mean that if someone wants a good motor with lots of balls and a indestructable block/head they will find that price fair........SO IF YOU GUYS THINK THAT ITS EXPENSIVE THAT MEANS YOU GUYS ARE NOT INTERESTED IN THIS MOTOR TO BEGIN WITH....SO PLEASE BE SO KIND AND GO TO THIS SITE INSTEAD IF YOU HAVE NOTHING ELSE TO DO BUT TO POST USELESS COMMENTS:

deleted

THEY OFFER A WIDE VARIETY OF PORN SO ENJOY AND LEAVE MY THREAD ALONE :)

[juve_240sx]

i will sell my car for that price i will even sell it for 8k lol

[midnight_rex]

im gonna chime on for the people that are saying shit about your build.

first off...where are all the receipts for proof of build?
second off...what was all done to the bottom and top end at the machine shop?

i wouldnt buy a "built (indestructible) motor" from someone that is from canada, that doesnt have proof of machine work, and definitely sales it on a internet forum.

its been in a car that who knows how its been driven with in "break in time".

not bashing on your thread dude. it would be easier to sale all your aftermarket parts separately. your asking too much for a motor that IS NOT INDESTRUCTIBLE.

looks to me like you sent off your motor to some guy from some "racing shop" to get it built and just dumped all your money for LABOR and PARTS, then called it YOUR BUILT MOTOR.

i wouldnt trust anyone trying to sale a BUILT motor unless there is enough evidence on the build.

i think this is why people are "talking shit" on your thread. just a heads up. :)

[DoriftoPnoy]

just curious how are you getting 2.4L?

my math takes me to 2.26....

[mrizsuki]

yeah. i agree with the receipt part of it. no proof = no sale. and it does come around 2.268 to 2.283 on my math if the motor was correctly broken in. but it seems like you love the speed. glws though

[S13 curtis]

so 2.3L. lol it would be 2.4 if he used 90mm pistons.

[philage16]

how much for the whole front end swap?

[afields81]

Bump for you my man. Your setup is badass. All the haters need to stay the hell outta your thread. 8500 is a tad to expensive for me but if it comes with fuel system, intercooler setup, injectors, engine management, mayb we can work something out

[afields81]

What clutch were you using? With this forged motor hopefully a twin disc at least